Date   

Re: QRZ.com

iain macdonnell - N6ML
 

It's intermittent for me - using the XML interface. Definitely doesn't seem
reliable...

~iain / N6ML

On Wed, Feb 2, 2011 at 11:33 PM, at6c <at6c@...> wrote:



I hate to add to the chatter on this subject, but is QRZ working? Seems
they are still having problems, but wanted to make sure I hadn't changed a
setting. Many thanks.
73
George
W2GS



Re: No spots showing up in Main window

N4DJ
 

Dave,
It was the clock off by 12 hours. Max age of incoming spots was at 10 minutes. Thanks to N7DC for that tip. My computer clock said 6:15 AM instead of PM.
73 and thanks,
Don

--- In dxlab@..., "Dave AA6YQ" <aa6yq@...> wrote:

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
N4DJ
Sent: Wednesday, February 02, 2011 11:41 AM
To: dxlab@...
Subject: [dxlab] No spots showing up in Main window


I have not had any new spots appear in the main window since yesterday
morning, although spots are appearing continuously in the individual source
window. I have checked to be sure I am not filtering them all out. I have
set the mode to SSB and CW, continents to all, origin to all and still
nothing new in the main window. I tried N1MM logger and spots come in fine.
I also upgraded to the latest Spot collector and still have the problem.
I imagine this has happened before to some one else. I have used spot
collector for several years and no problems.
Any suggestions?

Take a look at
<http://www.dxlabsuite.com/dxlabwiki/EmptyDatabase>

If this doesn't make the spots flow, please let me know.
73,

Dave, AA6YQ


Re: WinWarbler 6.9.7 changes mode to Phone when launched

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
w2nra@...
Sent: Wednesday, February 02, 2011 8:19 AM
To: DXLab Yahoo Group
Subject: [dxlab] WinWarbler 6.9.7 changes mode to Phone when launched


Hi Dave,

When I launch WinWarbler 6.9.7 with FT2000D in CW and Commander showing
CW-R, WinWarbler changes mode to Phone and Commander and Rig change to
Phone.

If I change WinWarbler's mode to CW and close and relaunch it, it still
changes mode to Phone.

WinWarbler 6.9.5 does not do this.

On the "Operating Mode Selection" panel on the General tab of
WinWarbler's Configuration window, how are each of the mode selectors
configured?

73,

Dave, AA6YQ


QRZ.com

George Steube
 

I hate to add to the chatter on this subject, but is QRZ working? Seems they are still having problems, but wanted to make sure I hadn't changed a setting. Many thanks.
73
George
W2GS


Re: Clublog

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: Michael Wells [mailto:michael@...]
Sent: Wednesday, February 02, 2011 6:41 AM
To: Dave AA6YQ
Subject: Re: [dxlab] Clublog


Hi Dave,

Real time logging is probably not the approach I'd want, as it has issues
when someone edits a QSO (eg. correcting the call) just after entering it.
It also has to support locking, edit, delete etc. to really connect well
with logging software. Here be dragons! I've actually tried it out -
realistically, I think it's not something that's worth the headaches.

eQSL has supported real-time uploading for many years; it's quite
reliable, and makes for an excellent user experience.

73,

Dave, AA6YQ


Re: Clublog

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Laurent FERRACCI
Sent: Wednesday, February 02, 2011 5:34 AM
To: dxlab@...
Subject: Re: [dxlab] Re: Clublog


If you choose to upload each & every QSO when it's logged, clublog qill get
all the infos available at logging time.

Later, when that already-uploaded QSO gets confirmed (either LotW or QSL
card), its "QSL status" (i should have said, rather that "QSL info")
changes.

Will that "QSL status" change be uploaded to Clublog ? In my understanding,
it won't

Not unless you re-upload it, or unless an "automatically upload to
ClubLog on QSL status change" option were provided.

Why is it necessary to update ClubLog with a logged QSO's confirmation
status?

73,

Dave, AA6YQ


Re: No spots showing up in Main window

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
N4DJ
Sent: Wednesday, February 02, 2011 11:41 AM
To: dxlab@...
Subject: [dxlab] No spots showing up in Main window


I have not had any new spots appear in the main window since yesterday
morning, although spots are appearing continuously in the individual source
window. I have checked to be sure I am not filtering them all out. I have
set the mode to SSB and CW, continents to all, origin to all and still
nothing new in the main window. I tried N1MM logger and spots come in fine.
I also upgraded to the latest Spot collector and still have the problem.
I imagine this has happened before to some one else. I have used spot
collector for several years and no problems.
Any suggestions?

Take a look at
<http://www.dxlabsuite.com/dxlabwiki/EmptyDatabase>

If this doesn't make the spots flow, please let me know.
73,

Dave, AA6YQ


Re: VP8ORK as VP8-F

Peter Jordahl
 

Thanks for the explanation, Tony. An interesting bit of history.
(BTW, I hope the "summer" weather in the South Orkneys is better than
the seather here in Austin, TX: Lows of 16F the last two mornings. I
know that's nothing for you northeners, but it is pretty unusual here.)
73
Pete K5GM

On Wed, 02 Feb 2011 10:28 -0500, "Anthony W. DePrato"
<wa4jqs@...> wrote:
At 05:43 PM 1/31/2011, you wrote:
I did not see the earlier response by Joe on this subject, sorry. But
that still begs the question of how DXVIEW or SpotCollector interprets
the DXCC database as it does? I see nothing in there about all of the
VP8 calls being assigned to the Falklands.

I guess for now an override is the appropriate fix.

73
Pete K5GM



Pete
very few realize that the Post Master in Stanley is the issuing
officer for ham calls. the Falklands for many years did not have
telephone service between a lot of the camps and ranches on either
the East or West Islands or the 20 some smaller islands surrounding
them. you do not have to set a test in the Falklands but cause for
years ham radio was used as the interisland telephone . many schools
would hold class over the radio so that the kids out in the camps
could have an education. for years i supplied crystals for a lot of
the hams so they could put their radios on the interisland freq. at
2mhz. Since they figure that South Sandwich South George South
Shetlands South Orkney ect. are all under the Protectant and part of
VP8 one call works for all. To help keep the islands apart in your
logging programs as each is a dxcc credit the programers came up with
the VP8-F VP8-SG VP8-O VP8-SI VP8-SH . SO when you worked a VP8 and
found out where he was you just checked which of the databases it
fell into. other then base operations people on the islands that have
military bases all the islands have no people living on them.
The bottom line is. if you work any VP8 it will be listed as
Falklands unless you setup and exception .

73 Tony VP8BLZ



------------------------------------

Yahoo! Groups Links



Pete Jordahl, K5GM
k5gm@...


Re: QRZ

Bill Duffy
 

Dave.............I received a nice note from Dave, WS2L with a new Password etc and assurances all was well!
And it is!
Tnx es 73
Bill KA0VXK

-----Original Message-----
From: Dave
Sent: Wednesday, February 02, 2011 2:24 PM
To: dxlab@...
Subject: [dxlab] Re: QRZ

AA6YQ comments below
--- In dxlab@..., "Bill Duffy" <bjduffy@...> wrote:

I have been reading different posts about QRZ.

Are they only accepting paid subscriptions?

As far as I know, one can still obtain free access by registering for a free account via
<https://ssl.qrz.com/support?op=newacct>

73,

Dave, AA6YQ



------------------------------------

Yahoo! Groups Links


Re: more dxlabs problems

Dave AA6YQ
 

AA6YQ comments below
At 02:21 PM 2/2/2011, you wrote:

i am convinced users of dxlabs have no idea what they are connecting to. i
have contacted a couple who were connecting to my port 7300, which has never
been advertised as a cluster node, and they think they are connecting to the
cluster... port 7300 is the default for the skimmer server, which is now no
longer available to users at my site anyway, but my firewall continues to
report connect attempts to that port, often 5-10 per minute! how many users
of dxlabs stuff think they are connecting to my cluster when all they are
doing is wasting bandwidth? apparently whatever they are sending as a login
is not compatible with ar-cluster because they don't get logged in if i
redirect the port there, so i have set it up with my wintelnetx blasting
rare dx spots with a comment to stop connecting, maybe that will get some of
their attention... that tactic seems to have worked for the locked out
cluster users at least.

The last cluster problem alleged to be the fault of a DXLab application
was quickly exposed to be the result of a badly misconfigured cluster node.
Had the time spent on hand-wringing and guesswork been instead applied to
methodical investigation, "the End of the World, part 1" could have been
avoided.

As for part 2, I have sent you an invitation to join the DXLab reflector
so you can directly inform the DXLab community when you've made changes to
your cluster that require user action, though I suggest that improving your
software to more efficiently deal with inappropriate logins would be the
better solution.

Paul, please forward this response to ar-cluster@... as my
request to join after the first cataclysm was not approved.

73,

Dave, AA6YQ


Re: QRZ

Bill Duffy
 

Tnx Dave.......I verified that I accept cookies and Java is up to date.
No response. they must be busy.
73
Bill
KA0VXK

-----Original Message-----
From: Dave
Sent: Wednesday, February 02, 2011 2:24 PM
To: dxlab@...
Subject: [dxlab] Re: QRZ

AA6YQ comments below
--- In dxlab@..., "Bill Duffy" <bjduffy@...> wrote:

I have been reading different posts about QRZ.

Are they only accepting paid subscriptions?

As far as I know, one can still obtain free access by registering for a free account via
<https://ssl.qrz.com/support?op=newacct>

73,

Dave, AA6YQ



------------------------------------

Yahoo! Groups Links


Re: QRZ

Dave AA6YQ
 

AA6YQ comments below
--- In dxlab@..., "Bill Duffy" <bjduffy@...> wrote:

I have been reading different posts about QRZ.

Are they only accepting paid subscriptions?

As far as I know, one can still obtain free access by registering for a free account via
<https://ssl.qrz.com/support?op=newacct>

73,

Dave, AA6YQ


FW: [ar-cluster] more dxlabs problems

Jim N7US
 

For those of you connecting to K1TTT. His port 7300 is not a cluster.
K1TTT may not be aware of the DXLab Reflector.



Jim N7US





From: ar-cluster@... [mailto:ar-cluster@...] On
Behalf Of K1TTT
Sent: February 02, 2011 12:22
To: ar-cluster@...; Sysops
Subject: [ar-cluster] more dxlabs problems








i am convinced users of dxlabs have no idea what they are connecting to. i
have contacted a couple who were connecting to my port 7300, which has never
been advertised as a cluster node, and they think they are connecting to the
cluster... port 7300 is the default for the skimmer server, which is now no
longer available to users at my site anyway, but my firewall continues to
report connect attempts to that port, often 5-10 per minute! how many users
of dxlabs stuff think they are connecting to my cluster when all they are
doing is wasting bandwidth? apparently whatever they are sending as a login
is not compatible with ar-cluster because they don't get logged in if i
redirect the port there, so i have set it up with my wintelnetx blasting
rare dx spots with a comment to stop connecting, maybe that will get some of
their attention... that tactic seems to have worked for the locked out
cluster users at least.







David Robbins K1TTT
e-mail: mailto:k1ttt@...
web: http://www.k1ttt.net <http://www.k1ttt.net/>
AR-Cluster node: 145.69MHz or telnet://dxc.k1ttt.net
<telnet://dxc.k1ttt.net/>


QRZ

Bill Duffy
 

Hi Dave:
I have been reading different posts about QRZ.
Are they only accepting paid subscriptions?
I have 4 or 5 emails to them with no response.
I realize you have no connection with QRZ but any info is appreciated.
Tnx es 73
Bill
KA0VXK


Re: DXKeeper bug?

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
martyn1ht
Sent: Wednesday, February 02, 2011 11:24 AM
To: dxlab@...
Subject: [dxlab] Re: DXKeeper bug?


In thinking about about, do we know whether more people add comments to
spots or not? If the majority make comments, perhaps the ctrl-click action
should be the default and the ctrl-click action would send the spot without
comment. That would also make it more intuitively consistent with SC.

SpotCollector provides a dedicated Notes box for outgoing spots; the CTRL
key is not used when generating an outgoing spot.

Changing the meaning of the CTRL key when generating a spot from
DXKeeper's Capture window from "prompt for notes" to "don't prompt for
notes" would make it no more or less consistent with SpotCollector, but
would force users to change behavior that's become automatic through many
years of repetition.

73,

Dave, AA6YQ


Re: DXKeeper

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Robert Sheskin
Sent: Wednesday, February 02, 2011 8:31 AM
To: dxlab@...
Subject: Re: [dxlab] DXKeeper


I have seen that a couple of times also, stopping and restarting
Pathfinder has always worked for me.

That means that DXKeeper has lost its ability to send messages to
Pathfinder, which in turn means that Windows is stressed. If you're running
any applications that aren't critical, consider terminating them.

73,

Dave, AA6YQ


Re: DXKeeper

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Barry Bourgond
Sent: Wednesday, February 02, 2011 8:27 AM
To: dxlab@...
Subject: [dxlab] DXKeeper


I keep getting the following error.



DXKeeper

Callbook error: Required version of Pathfinder not running.



I have the latest version, version 5.6.4.



Any ideas?

If you have the Callbook tab of DXKeeper's Configuration window set to
"QRZ.com via Pathfinder", then you must have Pathfinder running.

73,

Dave, AA6YQ


Re: my tower and the storm slightly off topic

Dave AA6YQ
 

AA6YQ comments below
--- In dxlab@..., "Richard J. Fiero II W5TFW" <joeyw5tfw@...> wrote:

I am TRULY " Shaken by the things I hear from you Guys ! "

where is your TRUST in AL Gore ! ~~~~~~~~~he has made Billions of dollars lying to all of YOU !

by the way, where IS al Gore ? surely he can explain this ?
Political comments or discussion are off-limits here. I expect this to stop immediately.


Re: my tower and the storm slightly off topic

Alan Beagley <ajbeagley@...>
 

On 02/02/11 06:04 am, Richard J. Fiero II W5TFW wrote:

I am TRULY " Shaken by the things I hear from you Guys ! "

where is your TRUST in AL Gore ! ~~~~~~~~~he has made Billions of dollars lying to all of YOU !

by the way, where IS al Gore ? surely he can explain this ?
Never mind Al Gore. AIUI, warmer oceans mean that the air picks up more moisture that then falls either as rain or as snow when it reaches cooler regions.

73

Alan NV8A


SQL search

Art K6XT <k6xt@...>
 

These 2 searches should produce the same "Add Needed" result for 80 and
160. Or at least I want them to. They do not.

#1: (band = '160m' or band = '80m') and QSO_Begin > #1 jan 2010# and
DXCCID <> '291' and DXCCID <> '339' and DXCCID <> '1' and dxccid <> '50'
and dxccid <> '110' and dxccid <> '148'

#2: QSO_Begin > #1 jan 2010# and DXCCID <> '291' and DXCCID <> '339' and
DXCCID <> '1' and dxccid <> '50' and dxccid <> '110' and dxccid <> '148'

#1 produces 2 "Add Needed" for 80, zero for 160, from a field of 606 QSOs.

#2 produces 25 "Add Needed" 80, 7 for 160, from a field of 3360 QSOs
including the two "Add Needed" QSOs produced by search #1.

Except for (band = '160m' or band = '80m') the two searches are a copy
'n paste. Sampling 80 and 160 entries in the search result they appear
to contain the same QSOs. My simple way of looking at this is a country
"Add Needed" in one search is also a country "Add Needed" in the other.
QSL Via is to an ADIF file. What might I have done wrong?

--
73 Art
Allison, Colorado
A glass is good, and a lass is good,
And a pipe to smoke in cold weather;
The world is good, and the people are good,
And we ’re all good fellows together.
John O’Keefe
Happy New Year!

120521 - 120540 of 209542