Date   

Re: Controlling winkeyer usb from commander?

Gary Slagel
 

thanks Dave


Re: User Define Control Yaesu FTdx101MP

Dave AA6YQ
 

+ AA6YQ comments below

> No, I haven't found it yet, I can't find it anywhere.

FTdx101MP/D CAT OPERATION REFERENCE MANUAL ... page 22. See TX#;

TX0; -> CAT TX OFF TX1; -> CAT TX ON

+ Rien, please reduce your FTDX101MP's RF output to "minimum", QSY to a clear frequency, and use the "Execute CAT Command" panel on Commander's Messages window to test the TX0; and TX1; commands to confirm that they work correctly.

+ If the two CAT commands work as expected, then insert the TX0; command into your sequence just before the command that sets the power level to 75 watts, and insert the TX1; command into your sequence just before the command that sets the power level to 5 watts.

73,

Dave, AA6YQ


Re: User Define Control Yaesu FTdx101MP

Joe Subich, W4TV
 

No, I haven't found it yet, I can't find it anywhere.
FTdx101MP/D CAT OPERATION REFERENCE MANUAL ... page 22. See TX#;

READ THE MANUAL

TX0; -> CAT TX OFF TX1; -> CAT TX ON


73,

... Joe, W4TV


On 2022-01-20 9:02 AM, Rien Aarden wrote:
On Wed, Jan 19, 2022 at 08:50 AM, Dave AA6YQ wrote:


Have you identified the CAT command that switches your transceiver from
receiving to transmitting
Hello Dave,
No, I haven't found it yet, I can't find it anywhere.
but with these steps I am already a lot further, maybe there is another FTdx101 owner with the same who knows where to find it.
Thank you in advance for the help,
Greeting
Rien, PA7RA


Re: User Define Control Yaesu FTdx101MP

Rien Aarden
 

On Wed, Jan 19, 2022 at 08:50 AM, Dave AA6YQ wrote:
Have you identified the CAT command that switches your transceiver from receiving to transmitting
Hello Dave,
 
No, I haven't found it yet, I can't find it anywhere.
but with these steps I am already a lot further, maybe there is another FTdx101 owner with the same who knows where to find it.
Thank you in advance for the help,
Greeting
Rien, PA7RA


Re: Spot Collector Monitor

Dave AA6YQ
 

+ AA6YQ comments below

Trying choice 2. Put DXKeeper .mdb file into Dropbox. Cannot see mdb file in Dropbox of target pc. I thought Dropbox mdb file was a "cloud" file accessible by my target pc Dropbox app.

+ Correct.

I am unable to see DXK mdb file on target pc Dropbox.

+ I suggest that you seek assistance from DropBox technical support.


While I am scratching my head, I will bring mdb file over with a usb stick.

I am trying to get help creating a local LAN. MS has not been able to fix LAN.

+ "It's always something!".

73,

Dave, AA6YQ


Re: Spot Collector Monitor

Jim Denneny <57JNDenneny@...>
 

Trying choice 2. Put DXKeeper .mdb file into Dropbox. Cannot see mdb file in Dropbox of target pc.  I thought Dropbox mdb file was a "cloud" file accessible by my target pc Dropbox app.  I am unable to see DXK mdb file on target pc Dropbox.  While I am scratching my head, I will bring mdb file over with a usb stick.

I am trying to get help creating a local LAN.  MS has not been able to fix LAN.

Jim K7EG


Re: Copy Field

Dave AA6YQ
 

+ AA6YQ comments below

Yes, exactly!

+ OK. So that I can see what's going on, please place your log file in a zip archive, attach the zip archive to an email message, and send the message to me via

aa6yq (at) ambersoft.com

73,

Dave, AA6YQ


Re: Copy Field

DF2PI
 

Yes, exactly!


Re: Copy Field

Dave AA6YQ
 

+ AA6YQ comments below

I have checked and the maximum length of my actual SOTA entries is 11. So it should fit in the SOTA_REF-field. But still getting the error message mentioned above.

+ Are your saying that when you filter the Log Page Display with this SQL expression

LEN(APP_DXKeeper_USER_DEFINED_6)>16

+ That the Log Page Display is empty?

73,

Dave, AA6YQ


Re: Copy Field

DF2PI
 

Thanks for the reply, Dave.

I have checked and the maximum length of my actual SOTA entries is 11. So it should fit in the SOTA_REF-field. But still getting the error message mentioned above.


Re: Copy Field

Dave AA6YQ
 

+ AA6YQ comments below

If I do hit "modify", I do get the error message:

APP_DXKeeper_USER_DEFINED_6 is too large for SOTA_REF, whose width is 16

In my User defined topics I do have APP_DXKeeper_USER_DEFINED_6 to be "Alphanumeric".
What should I do to solve this?

+ DXKeeper is informing you that one of your QSOs specifies an APP_DXKeeper_USER_DEFINED_6 item that contains more than 16 characters, and thus cannot be copied to the SOTA_REF item.

+ Filter your Log Page Display with the SQL expression

LEN(APP_DXKeeper_USER_DEFINED_6)>16

+ This will show you all of your logged QSOs that specify an APP_DXKeeper_USER_DEFINED_6 item that is "too large". Manually correct these, and you'll then be able to use the "Modify QSO" panel to copy all APP_DXKeeper_USER_DEFINED_6 items to SOTA_REF items.

      73,

             Dave, AA6YQ

 

 


Re: User Define Control Yaesu FTdx101MP

Dave AA6YQ
 

+ AA6YQ comments below
Sorry but this is to much for me I do not understand the last mail that you wrote.

+ Have you identified the CAT command that switches your transceiver from receiving to transmitting?

+ Have you identified the CAT command that switches your transceiver from transmitting to receiving?

    73,

          Dave, AA6YQ

 


Re: User Define Control Yaesu FTdx101MP

Rien Aarden
 

Dave 

Sorry but this is to much for me I do not understand the last mail that you wrote.

But I thank you that you wil help me with this.
Rien, PA7RA 


Re: Sort box user ?

Joe Subich, W4TV
 

Advanced Sorts, Filters and Modifiers Window ... Upper 20% has
four sorts with a "select" radio button on the right end of
each sort.

Set up and select the "User" sort there ...


73,

... Joe, W4TV

On 2022-01-19 5:00 AM, Gordon LaPoint wrote:
In the Sort box on the bottom left of the Log QSOs tab, where do I setup the "User"  sort?
Thanks,
Gordon - N1MGO


Sort box user ?

Gordon LaPoint
 

In the Sort box on the bottom left of the Log QSOs tab, where do I setup the "User"  sort?

Thanks,

Gordon - N1MGO


Re: Copy Field

DF2PI
 

Hello,
I just ran into the same topic. If I do hit "modify", I do get the error message:

APP_DXKeeper_USER_DEFINED_6 is too large for SOTA_REF, whose width is 16

In my User defined topics I do have APP_DXKeeper_USER_DEFINED_6 to be "Alphanumeric".
What should I do to solve this? Thanks a lot.
regards,
Suitbert, DF2PI


Re: ODDITY WITH DXLABS AND STATIONMASTER

Joe Subich, W4TV
 

Again, what is the source of the error displayed on Station Master
LCD panel when the ALARM led blinks?

I have captured the file from the cat log and it appears that the router is not receiving info.
Send the CAT Communications Log demonstrating the problem to
"support@...". That is the appropriate venue for
microHAM support.

73,

... Joe, W4TV


On 2022-01-18 12:04 AM, Greg wrote:
Thanks for the tips.  I did confirm that USB Selective Suspends were disabled.  I have set the interval on Commander from 200ms to 160ms to match your settings. And I found the Router log and have it capturing the dataflow back and forth to hopefully identify when the undesired event happens.  I am not exactly sure that the settings are the same between the Preset for WSJT and for DXLABS but they appear to be as far as I can tell.  I have captured the file from the cat log and it appears that the router is not receiving info. So I am updating the firmware just in case.  Have not been able to duplicate things this evening so I will try again tomorrow.


Re: User Define Control Yaesu FTdx101MP

Dave AA6YQ
 

+ AA6YQ comments below
<name:6>TXP 75<LEDenabled:1>1<LEDcolor:5>White<ButtonTextcolor:1>0<ButtonSurfacecolor:11>-2147483633
<tooltip:18>TX Power Steps 3db
 
<ifled black,11>
 
<ifled blue,16>
 
<ifled cyan,21>
 
<ifled green,26>
 
 
 
<led black>
 
'PC005;
 
<name TXP 5>
 
<end>

+ OK. Next, locate the CAT commands for "switch from RX to TX" and "switch from TX to RX". Then insert them into the sequence.

     73,

           Dave, AA6YQ


Re: Slider "Function Field" Does not Appear when Hovering over Slider Label

Dave AA6YQ
 

+ AA6YQ comments below
On Tue, Jan 18, 2022 at 04:53 AM, John AC4CA wrote:
Discovered that when using Win10 multiple monitors, tool tips for sliders only show up when the Commander window is displayed in "Monitor 1." Other tool tips in window work as advertised. Wow....
See this post https://groups.io/g/DXLab/message/195587 for Dave's answer when I asked this question. 

+ Yes, there is a known defect in the commercial component used to implement the "Log Page Display" in DXKeeper and the "Spot Database Display" in SpotCollector that prevents tooltips from appearing in those displays when they are positioned on any monitor other than the primary.

+ Commander's "Sliders" are implemented with a component known as a "horizontal scroll bar" that is provided by Microsoft; evidently, it contains a similar defect. 

    73,

          Dave, AA6YQ


Re: Slider "Function Field" Does not Appear when Hovering over Slider Label

 

On Tue, Jan 18, 2022 at 04:53 AM, John AC4CA wrote:
Discovered that when using Win10 multiple monitors, tool tips for sliders only show up when the Commander window is displayed in "Monitor 1." Other tool tips in window work as advertised. Wow....
See this post https://groups.io/g/DXLab/message/195587 for Dave's answer when I asked this question. 
 
--
Bob AF9W
DXLab user since 2011

5341 - 5360 of 211173