Date   

Re: User Define Control Yaesu FTdx101MP

Dave AA6YQ
 

+ AA6YQ comments below
<name:6>TXP 75<LEDenabled:1>1<LEDcolor:5>White<ButtonTextcolor:1>0<ButtonSurfacecolor:11>-2147483633
<tooltip:18>TX Power Steps 3db
 
<ifled black,11>
 
<ifled blue,16>
 
<ifled cyan,21>
 
<ifled green,26>
 
 
 
<led black>
 
'PC005;
 
<name TXP 5>
 
<end>

+ OK. Next, locate the CAT commands for "switch from RX to TX" and "switch from TX to RX". Then insert them into the sequence.

     73,

           Dave, AA6YQ


Re: Slider "Function Field" Does not Appear when Hovering over Slider Label

Dave AA6YQ
 

+ AA6YQ comments below
On Tue, Jan 18, 2022 at 04:53 AM, John AC4CA wrote:
Discovered that when using Win10 multiple monitors, tool tips for sliders only show up when the Commander window is displayed in "Monitor 1." Other tool tips in window work as advertised. Wow....
See this post https://groups.io/g/DXLab/message/195587 for Dave's answer when I asked this question. 

+ Yes, there is a known defect in the commercial component used to implement the "Log Page Display" in DXKeeper and the "Spot Database Display" in SpotCollector that prevents tooltips from appearing in those displays when they are positioned on any monitor other than the primary.

+ Commander's "Sliders" are implemented with a component known as a "horizontal scroll bar" that is provided by Microsoft; evidently, it contains a similar defect. 

    73,

          Dave, AA6YQ


Re: Slider "Function Field" Does not Appear when Hovering over Slider Label

 

On Tue, Jan 18, 2022 at 04:53 AM, John AC4CA wrote:
Discovered that when using Win10 multiple monitors, tool tips for sliders only show up when the Commander window is displayed in "Monitor 1." Other tool tips in window work as advertised. Wow....
See this post https://groups.io/g/DXLab/message/195587 for Dave's answer when I asked this question. 
 
--
Bob AF9W
DXLab user since 2011


Re: Spot Collector Monitor

Jim Denneny <57JNDenneny@...>
 

Terrific. Thanks Dave

Jim K7EG


Re: User Define Control Yaesu FTdx101MP

Rien Aarden
 

Hello Dave,
<name:6>TXP 75<LEDenabled:1>1<LEDcolor:5>White<ButtonTextcolor:1>0<ButtonSurfacecolor:11>-2147483633
<tooltip:18>TX Power Steps 3db
 
<ifled black,11>
 
<ifled blue,16>
 
<ifled cyan,21>
 
<ifled green,26>
 
 
 
<led black>
 
'PC005;
 
<name TXP 5>
 
<end>


This works with the FTdx1-1MP change to 5 watts en back to 75watts

73 Rien, PA7RA 


Re: Slider "Function Field" Does not Appear when Hovering over Slider Label

John AC4CA
 

Discovered that when using Win10 multiple monitors, tool tips for sliders only show up when the Commander window is displayed in "Monitor 1." Other tool tips in window work as advertised. Wow....


Re: DXKeeper - QSL window

kdsipi@...
 

Thanks Dave 73
K9KDS


Re: ELIMINATING DUPLICATE QSOS

Dave AA6YQ
 

+ AA6YQ comments below

I have roughly 12500 duplicate QSOs in my log file. All of the duplicates curiously have “jj00aa” filled in the Grid 1 box of the award section of the main display page. Is there a way I can filter and delete these or get rid of these dupes other than manually?

+ DXKeeper includes a function that identifies duplicate QSOs so that you can delete them en masse. It works by checking each QSO in your log against every other QSO; the bigger the log, the longer it takes:

https://www.dxlabsuite.com/dxlabwiki/RemovingDuplicates


+ However, if every QSO in your log whose Gridsquare item is set to JJ00aa is a duplicate QSOs that you wish to delete, then there is a simpler and faster alternative:

1. Backup your log (Configuration window, Log tab, Backup button)

2. On the Main window's "Log QSOs" tab, click the Adv button above the "Log Page Display"; the "Advanced Sorts, Filters, and Modifiers" window will appear

3. In the "Advanced Sorts, Filters, and Modifiers" window's "SQL Query Filters" panel, set the first empty "SQL expression" box to

GRIDSQUARE='JJ00aa'

and then click the Filter button to its right

4. On the Main window's "Log QSOs" tab, confirm that the ~12,500 QSOs in the "Log Page Display" are exactly the ones you want deleted.

5. While depressing your keyboard's CTRL key, click the Delete button above the "Log Page Display".

73,

Dave, AA6YQ


ELIMINATING DUPLICATE QSOS

Greg
 

I have roughly 12500 duplicate QSOs in my log file.  All of the duplicates curiously have “jj00aa” filled in the Grid 1 box of the award section of the main display page.  Is there a way I can filter and delete these or get rid of these dupes other than manually?

 

73’s,

Greg N9GB


Re: ODDITY WITH DXLABS AND STATIONMASTER

Greg
 

Thanks for the tips.  I did confirm that USB Selective Suspends were disabled.  I have set the interval on Commander from 200ms to 160ms to match your settings. And I found the Router log and have it capturing the dataflow back and forth to hopefully identify when the undesired event happens.  I am not exactly sure that the settings are the same between the Preset for WSJT and for DXLABS but they appear to be as far as I can tell.  I have captured the file from the cat log and it appears that the router is not receiving info. So I am updating the firmware just in case.  Have not been able to duplicate things this evening so I will try again tomorrow.


Re: DX Keeper not accepting some calls from WSJT nor JT Alert-SOLVED

Steven
 

This is what it took for me to get everything working.   No matter what version of any of the programs, they worked fine on my older Win 8.1.  The trouble started with crappy 11.  As you stated, Runtime 5.0.13 has been updated on HamApps.  I will try that so that I can get back to the preferred JTAlert 2.5!!!  Can not wait for any new version!

Thank you for your reply!!


Re: DXCC credit error

Dave AA6YQ
 

I have a mismatch between DXKeeper and LOTW. LOTW reports 250 confirmed DXCC country credits on 40m and DXKeeper reports 251. I filtered my log display to only include 40m Q's and then ran the "Update from LoTW" routine. I reviewed the resulting report and did not see any indication of the wrongfully credited country.

+ The "Update from LoTW" function does not identify discrepancies. It updates your logged QSOs to reflect their confirmation and award credit status as reported by LoTW. It would not report a logged QSO erroneously marked as "DXCC award credit granted"

Is there another way to compare the credits to find the mismatch?

+ Yes. See

https://www.dxlabsuite.com/dxlabwiki/IdentifyDXCCCreditDiscrepancies

73,

Dave, AA6YQ


Re: DX Keeper not accepting some calls from WSJT nor JT Alert-SOLVED

JTAlert Support (VK3AMA)
 

On 18/01/2022 1:41 pm, St. Cuda wrote:
needed a newer version of Windows Runtime and just could not find anything newer then the 5.0.12, available in HamApps

The NET 5.0.12 Desktop Runtime is perfectly fine for JTAlert 2.5.x. Earlier versions of the NET 5 Desktop Runtime are acceptable as well. The files linked on HamApps are done because of the large number of users who had trouble with the Microsoft download page and would install the incorrect non-desktop runtime. While HamApps has the 5.0.12 runtime links the latest is 5.0.13.

The links on HamApps will be updated today.

BTW, I am still running 5.0.10 of the desktop runtime with JTAlert 2.50.9 (the latest) without issue on my Ham PC.

de Laurie VK3AMA
(JTAlert developer)


Re: DXKeeper - QSL window

Dave AA6YQ
 

+ AA6YQ comments below]

In the QSL window how do I get to auto fill the QSL address.
I have been using the CBA button and that works fine but to slow to do that for every QSO.

+ To add a postal address to an entry in the QSL Queue, double-click the entry. In the "QSL Editor" window that appears, click the "Callsign lookup" panel's Callsign or Manager button as appropriate; then click the Save button.

+ If you want each QSO to automatically be augmented with Callbook information when it's logged via DXKeeper's Capture window or via its Main window's "Log QSOs" tab, check the "Automatically use callbook data to initialize new QSOs" box in the lower-right corner of the Configuration window's Callbook tab.

73,

Dave, AA6YQ


DX Keeper not accepting some calls from WSJT nor JT Alert-SOLVED

Steven
 

System is Win11, DXKeeper 16.3.2, WSJT 2.5, JtAlert 2.5, Windows Runtime 5.0.12

Been working correctly for two days.  First, uninstalled McFee;  Found out that there was an uninstall for McFee by doing a search to get rid of the rest of the stuff.  That helped, but not completely.  For some reason, can not find a newer mouse driver (2006) then what came with 11 late last 2021.  So, running the mouse driver in Win 8 mode.  Same as WSJT and JTAlert. 

Finally, went backwards and installed JTAlert 2.16.17, running in Win 8 mode.  BINGO!  It's back working as should be!  I had read that JTAlert 2,5, which I really liked, needed a newer version of Windows Runtime and just could not find anything newer then the 5.0.12, available in HamApps.  If you find a newer version, please let me know.


DXCC credit error

n4qwf .
 

I have a mismatch between DXKeeper and LOTW. LOTW reports 250 confirmed DXCC country credits on 40m and DXKeeper reports 251. I filtered my log display to only include 40m Q's and then ran the "Update from LoTW" routine. I reviewed the resulting report and did not see any indication of the wrongfully credited country.  Is there another way to compare the credits to find the mismatch?

Thanks any help. John N4QWF


DXKeeper - QSL window

kdsipi@...
 

In the QSL window how do I get to auto fill the QSL address.
I have been using the CBA button and that works fine but to slow to do that for every QSO.
Thank You


Re: Spot Collector Monitor

Dave AA6YQ
 

+ AA6YQ comments below

Is there a simple way to monitor for needed spots on a pc in my office? I would like to turn pc off in my radio room and setup my office pc for needed spots. What are my options? Thanks

+ Your options are

1. leave SpotCollector running in your radio room, and access SpotCollector's web server from a web browser on your office PC:

https://www.dxlabsuite.com/spotcollector/Help/WebBrowser.htm

2. Install a SpotCollector on your office PC, copy your log file from your radio room PC to a free Dropbox account, and configure SpotCollector in your office to refer to your log file on Dropbox. When you log a "new one", copy your updated log file from your radio room PC to your DropBox account.

73,

Dave, AA6YQ


Spot Collector Monitor

Jim Denneny <57JNDenneny@...>
 

Is there a simple way to monitor for needed spots on a pc in my office? I would like to turn pc off in my radio room and setup my office pc for needed spots.  What are my options? Thanks

Jim K7EG


Re: Controlling winkeyer usb from commander?

Dave AA6YQ
 

+ AA6YQ comments below:
Should I be able to display and control my Winkeyer USB from commander or do I need to use Winwarbler?   I'm not using any digital modes so I don't run Winwarbler.  Commander displays the keyer speed at 16wpm but does it does not change and I don't see a way to control the speed from commander.
+ You need WinWarbler to control a WinKeyer.

       73,

            Dave, AA6YQ

5261 - 5280 of 211076