Date   

Re: Spotcollector

Dave AA6YQ
 

+ AA6YQ comments below
Dave did i obset you with something?

Usualy we all get answers within a few hours, i even wonder if you ever sleep.

Now it's been several days, i did send you several ErrorLogs, still got no aswer.

If i did i so, really apologize. At least, give me a sign of life please.

+ I have not received any errorlogs from you, Eddy. Please place the errorlog.txt file I requested in a zip archive, attach the archive to an email message, and send the message to me via

aa6yq (at) ambersoft.com

        73,

              Dave, AA6YQ


Re: Report

Joe Subich, W4TV
 

There is no predefined report that does what you want.

However, you can filter the log page display to display
QSOs on 6M that have been verified either LotW or Card,
define a log display that shows the data as you want and
then use the REPORT button on the log page display to
print the report.

See the DXKeeper Help file for the Check Progress tab.

73,

... Joe, W4TV

On 2021-06-21 8:34 AM, Julio Peralta via groups.io wrote:
I'm chasing down some problems in the DXCC award
for 6M. Is there a report that will list the call
of all my DXCC entities by prefix/country and
whether they are card or LOTW confirmations or
both?
Julio, W4HY


Report

Julio Peralta
 

I’m chasing down some problems in the DXCC award for 6M. Is there a report that will list the call of all my DXCC entities  by prefix/country and whether they are card or LOTW confirmations or both?

 

Julio, W4HY


Spotcollector

eddy on5jk
 

Dave did i obset you with something?

Usualy we all get answers within a few hours, i even wonder if you ever sleep.

Now it's been several days, i did send you several ErrorLogs, still got no aswer.

If i did i so, really apologize. At least, give me a sign of life please.

Eddy ON5JK


Re: DXVIEW looked into one call (seem like a loop)

HamApps Support (VK3AMA)
 

On 21/06/2021 4:47 am, The Romagni's wrote:
ok... I might have found something, I rebooted as you suggested, then launched dxview and it behaved as planned - then i lunched wsjtx and the jtalert then the issue came back! so looks like the issue is with in jtalert... now let me see if I can find the why there...

If JTAlert is repeatedly sending the WSJT-X DXCall to DXView it will be because JTAlert is getting repeated updates on the DXCall. Based on recent similar issues, the problem is very likely incorrect configuration in JTAlert, specifically, the "Resend WSJT-X UDP packets..." setting, under the "Applications -> WSJTX/JTDX" section of the Settings window, is enabled with the port incorrectly set to the same port that JTAlert is listening to for UDP data from WSJT-X.

Typically these incorrect setups have the port set to 2237 which is the default port that WSJT-X is sending to. A feedback loop is created where JTAlert is repeatedly resending the UDP packets back to its input.

This has become a common enough problem in recent weeks I am starting to believe that there is some incorrect setup instructions floating around and people are applying these changes without any understanding of what they are doing. If the changes were made to fulfill a specific multi-app setup, it would not be working, so it is best to just turn off that setting or at a minimum change the port to something other than 2237.

FWIW, by default this setting is NOT enabled and the default port is 2334. Any changes from these defaults can only happen by the end-user modifying them.

Alternatively there is another WSJT-X interacting application running and it is re-sending the UDP data to port 2237 (or whatever the UDP Server port is set to in WSJT-X).

de Laurie VK3AMA


Re: Quick Request

Dave AA6YQ
 

Hi there ,

Sorry to bother you , do you have an account with amazon ? Thanks

+ This member's email account has  likely been compromised; future posts are moderated.

       73,

              Dave, AA6YQ


Re: Quick Request

Pete Smith
 

This is almost certainly a scam - if you reply yes, you will be spun a tale about how his Amazon account is jammed up for some random reason, and he desperately needs something.  Can he use your Amazon account and pay you back?

73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at <http://beta.reversebeacon.net>.
For spots, please use your favorite 
"retail" DX cluster.
On 6/20/2021 5:24 PM, Jim Sjoberg wrote:

Who are you looking for??

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Jerome Sodus
Sent: Sunday, June 20, 2021 3:48 PM
To: DXLab@groups.io
Subject: [DXLab] Quick Request

 

Hi there ,

Sorry to bother you , do you have an account with amazon ? Thanks


Re: Quick Request

Gilbert Baron W0MN
 

What does that have to do with anything. All of DXLAB software is free and Amazon is not involved.

 

Outlook Laptop Gil W0MN

Hierro candente, batir de repente

44.08226N 92.51265W EN34rb

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Jerome Sodus
Sent: Sunday, June 20, 2021 15:48
To: DXLab@groups.io
Subject: [DXLab] Quick Request

 

Hi there ,

Sorry to bother you , do you have an account with amazon ? Thanks


--

W0MN EN34rb 44.08226 N 92.51265 W

Hierro candente, batir de repente

HP Laptop


Re: Quick Request

Pete Smith
 

Scam scam scam

73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at <http://beta.reversebeacon.net>.
For spots, please use your favorite 
"retail" DX cluster.
On 6/20/2021 4:48 PM, Jerome Sodus wrote:

Hi there ,

Sorry to bother you , do you have an account with amazon ? Thanks


Re: Quick Request

Jim Sjoberg
 

Who are you looking for??

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Jerome Sodus
Sent: Sunday, June 20, 2021 3:48 PM
To: DXLab@groups.io
Subject: [DXLab] Quick Request

 

Hi there ,

Sorry to bother you , do you have an account with amazon ? Thanks


Quick Request

Jerome Sodus
 

Hi there ,

Sorry to bother you , do you have an account with amazon ? Thanks


Re: DXVIEW looked into one call (seem like a loop)

The Romagni's
 

ok... I might have found something, I rebooted as you suggested, then launched dxview and it behaved as planned - then i lunched wsjtx and the jtalert then the issue came back! so looks like the issue is with in jtalert... now let me see if I can find the why there...


Re: DXVIEW looked into one call (seem like a loop)

Dave AA6YQ
 

I give up, and coming here for anwsers. So I might have done something, and now dont know how to fix what I did. Here is the scenario:

DX VIew is showing one call permanently (kd9kak qso done on 160 back 1/12/2021) - I erase the call from the search callsign box, and a few minutes later it comes back. I have looked in SpotCollector, DXView (ver 4.7.9) and dxKeepeer and still have not found how to fix it so it does not default to what I am seeing...

+ Is there an errorlog.txt file in your DXView folder? If so, please attach it to an email message, and send the message to me via

aa6yq (at) ambersoft.com

+ Otherwise, please terminate your applications, reboot Windows, start the Launcher, and direct the Launcher to start DXView. Any change in behavior?

73,

Dave, AA6YQ


DXVIEW looked into one call (seem like a loop)

The Romagni's
 

Ok, 

I give up, and coming here for anwsers. So I might have done something, and now dont know how to fix what I did. Here is the scenario:

DX VIew is showing one call permanently  (kd9kak qso done on 160 back 1/12/2021)  - I erase the call from the search callsign box, and a few minutes later it comes back. I have looked in SpotCollector, DXView (ver 4.7.9) and dxKeepeer and still have not found how to fix it so it does not default to what I am seeing...

any insides?

Thanks

Steve
W4DTA


Re: Spotcollector not working

Dave AA6YQ
 

+ AA6YQ comments below
Spotcollector froze on me 2 days ago with no new spots coming in.  I made sure I was upgraded to the latest version, 8.8.8, and checked some back messages on this issue. It seemed the resolution was to remove spot.mdb from the spotcollector/database.  I did that but all I succeeded in doing was removing the spots already there; Spotcollector is still not populating. Suggestions?

+ Is there an errorlog.txt file in your SpotCollector folder? If so, please attach it to an email message, and send it to me via

aa6yq (at) ambersoft.com

+ Otherwise, please review this article:

https://www.dxlabsuite.com/dxlabwiki/EmptyDatabase

    73,

          Dave, AA6YQ

 


Re: DXKeeper upgrade, from 15.9.9 to 16.1.5

Dave K2XR
 

Concur, same finding here.

On 6/19/2021 3:26:36 PM, Dave AA6YQ wrote:
Is it possible that compacting the file before the upgrade might help?

+ Experiments have not shown that compacting beforehand makes a difference.

73,
Dave, AA6YQ






Spotcollector not working

Marv Stasak
 

Spotcollector froze on me 2 days ago with no new spots coming in.  I made sure I was upgraded to the latest version, 8.8.8, and checked some back messages on this issue. It seemed the resolution was to remove spot.mdb from the spotcollector/database.  I did that but all I succeeded in doing was removing the spots already there; Spotcollector is still not populating. Suggestions?

73,
Marv, W5DT


Re: DXKeeper Window Missing - RESOLVED

Fred - NA2U
 

Thanks, Joe!

73 from the desert,

Fred/NA2U

---------- Original Message ----------
From: "Joe Subich, W4TV" <lists@subich.com>
To: DXLab@groups.io
Subject: Re: [DXLab] DXKeeper Window Missing
Date: Sun, 20 Jun 2021 10:23:17 -0400


Close all DXLab Apps except Launcher and DXKeeper.
Open Launcher -> Config and click the "RESET" button in
the bottom row.

This will move DXKeeper and all its windows to the Primary
monitor.


73,

... Joe, W4TV


On 2021-06-20 10:09 AM, Fred - NA2U wrote:
I am using Windows 10 Pro with a 3-monitor configuration. Yesterday I removed one monitor, replaced it with a new one, and moved another monitor.

When I start DXKeeper its icon appears on the task bar but the window does not open on any monitor. I have tried the the various windows arrangement settings by right-clicking on the task bar without success. When I hover the mouse over the DXKeeper icon on the task bar it shows DXKeeper but the “preview” window is blank.

Any suggestions about how to recover? Thanks.

73 from the desert,

Fred/NA2U




____________________________________________________________
Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more

Truck Strikes People at Pride Parade, Killing 1
http://thirdpartyoffers.juno.com/TGL3141/60cf518ca9f80518c6ee7st03vuc1
Sunrise Hike Ends in Tragedy in Wyoming
http://thirdpartyoffers.juno.com/TGL3141/60cf518ccd5d4518c6ee7st03vuc2
Nationwide Events Mark Juneteenth
http://thirdpartyoffers.juno.com/TGL3141/60cf518cf0b82518c6ee7st03vuc3


Re: DXKeeper Window Missing

Joe Subich, W4TV
 

Close all DXLab Apps except Launcher and DXKeeper.
Open Launcher -> Config and click the "RESET" button in
the bottom row.

This will move DXKeeper and all its windows to the Primary
monitor.


73,

... Joe, W4TV

On 2021-06-20 10:09 AM, Fred - NA2U wrote:
I am using Windows 10 Pro with a 3-monitor configuration. Yesterday I removed one monitor, replaced it with a new one, and moved another monitor.
When I start DXKeeper its icon appears on the task bar but the window does not open on any monitor. I have tried the the various windows arrangement settings by right-clicking on the task bar without success. When I hover the mouse over the DXKeeper icon on the task bar it shows DXKeeper but the “preview” window is blank.
Any suggestions about how to recover? Thanks.
73 from the desert,
Fred/NA2U


DXKeeper Window Missing

Fred - NA2U
 

I am using Windows 10 Pro with a 3-monitor configuration. Yesterday I removed one monitor, replaced it with a new one, and moved another monitor.

When I start DXKeeper its icon appears on the task bar but the window does not open on any monitor. I have tried the the various windows arrangement settings by right-clicking on the task bar without success. When I hover the mouse over the DXKeeper icon on the task bar it shows DXKeeper but the “preview” window is blank.

Any suggestions about how to recover? Thanks.

73 from the desert,

Fred/NA2U
____________________________________________________________
Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_taglines_more

Sunrise Hike Ends in Tragedy in Wyoming
http://thirdpartyoffers.juno.com/TGL3141/60cf4c25d78694c255979st04duc1
Nationwide Events Mark Juneteenth
http://thirdpartyoffers.juno.com/TGL3141/60cf4c266a114c255979st04duc2
Police Shoot Driver After Pickup Strikes Bicyclists
http://thirdpartyoffers.juno.com/TGL3141/60cf4c2629de34c255979st04duc3

1881 - 1900 of 203916