Date   

Re: DXKeeper errorlog.

Dave AA6YQ
 

+ AA6YQ comments below
I experienced an issue while operating WSJT-X FT8 while also running JTAlert this morning with DXKeeper.  I can not provide an exact sequence of events that generated this error.  I'd like to send you the DXKeepre error log for inspection and perhaps you can provide guidance on what steps I should take

+ Please attach the errorlog.txt file from your DXKeeper folder to an email message, and send the message to me via

aa6yq (at) ambersoft.com

+ Note that my prior approval is not required to email me an errorlog.txt file that was spontaneously generated.

         73,

                 Dave, AA6YQ

 


DXKeeper errorlog.

Robie - AJ4F
 

Dave,

I experienced an issue while operating WSJT-X FT8 while also running JTAlert this morning with DXKeeper.  I can not provide an exact sequence of events that generated this error.  I'd like to send you the DXKeepre error log for inspection and perhaps you can provide guidance on what steps I should take.

Robie - AJ4F


Re: force Windows focus

Greg
 

oops

Meant to go to Andy direct!

Greg

On 12/05/2021 14:33, Greg wrote:

Hi Andy

I have attached a autohotkey script that should do what you want, it did on my system!  Once you have downloaded and installed Autohotkeys run the script and hold the "Windows" key and the "z' key and winwarbler should jump into focus. You can change the key combination by changing the line that is #z::  the # indicates the windows key and the z is obvious.

Cheers

Greg VK3VT


On 12/05/2021 12:59, Andy - K0AF wrote:
Thank you all for the suggestions. "Alt-Tab" takes an indeterminant number of key strokes to get to the WinWarbler window. Using the mouse is not an option because I need to switch focus to WinWarbler while I'm sending CW. I'm not coordinated enough to use an iambic paddle with one hand and navigate a mouse with the other at the same time. It looks like AutoHotKey is the solution I'm looking for. One more software tool to learn and write scripts for!

Thanks Iain (and Al via private email).

73,
Andy - K0AF


Re: force Windows focus

Greg
 

Hi Andy

I have attached a autohotkey script that should do what you want, it did on my system!  Once you have downloaded and installed Autohotkeys run the script and hold the "Windows" key and the "z' key and winwarbler should jump into focus. You can change the key combination by changing the line that is #z::  the # indicates the windows key and the z is obvious.

Cheers

Greg VK3VT


On 12/05/2021 12:59, Andy - K0AF wrote:
Thank you all for the suggestions. "Alt-Tab" takes an indeterminant number of key strokes to get to the WinWarbler window. Using the mouse is not an option because I need to switch focus to WinWarbler while I'm sending CW. I'm not coordinated enough to use an iambic paddle with one hand and navigate a mouse with the other at the same time. It looks like AutoHotKey is the solution I'm looking for. One more software tool to learn and write scripts for!

Thanks Iain (and Al via private email).

73,
Andy - K0AF


Re: Russia - RDA

Dave AA6YQ
 

+ AA6YQ comments below
I try and enter all award details that I can, especially for Russian RDA.  I understand that R7KO's RDA is RK-12 but I do not get that option at all in my logging DX Keeper.  Am I doing something wrong?  Please let me know
+ DXLab does not recognize the Russian annexation of Crimea.

        73,

               Dave, AA6YQ


Russia - RDA

Srivathsa Satya
 


I try and enter all award details that I can, especially for Russian RDA.  I understand that R7KO's RDA is RK-12 but I do not get that option at all in my logging DX Keeper.  Am I doing something wrong?  Please let me know

73
Vatsa
VU2AE
8T8S - Contest Call
VU3BLR - Earlier


Re: force Windows focus

Andy - K0AF
 

Thank you all for the suggestions. "Alt-Tab" takes an indeterminant number of key strokes to get to the WinWarbler window. Using the mouse is not an option because I need to switch focus to WinWarbler while I'm sending CW. I'm not coordinated enough to use an iambic paddle with one hand and navigate a mouse with the other at the same time. It looks like AutoHotKey is the solution I'm looking for. One more software tool to learn and write scripts for!

Thanks Iain (and Al via private email).

73,
Andy - K0AF


Re: force Windows focus

Dave AA6YQ
 

+ AA6YQ comments below
Is there a way to program a keyboard sequence to force Windows 10 focus to a specific window when several applications are open? I'd like to be able to force focus to WinWarbler from the keyboard instead of grabbing the mouse, wiggling it to find the cursor, moving the cursor to the WinWarbler window (which may or may not be visible) and left clicking in the WinWarber window. Is there a way to force focus to a specific application within DXLabs or perhaps within Windows 10? If not, then maybe a 3rd party application?
+ Pin WinWarbler to the Windows Task Bar. When you want WinWarbler, place your mouse over the WinWarbler icon in the Windows task bar; when an image of WInWarbler's Main window appears above the icon, click on it.

       73,

            Dave, AA6YQ


Re: force Windows focus

Gilbert Baron W0MN
 

That just cycles through and is not a way to go to a specific window.

 

Outlook Laptop Gil W0MN

Hierro candente, batir de repente

44.08226N 92.51265W EN34rb

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Jeremy - N8JJA
Sent: Tuesday, May 11, 2021 16:17
To: DXLab@groups.io
Subject: Re: [DXLab] force Windows focus

 

There is a key sequence already in windows 10...if you hit Alt+Shift+Tab you can cycle through any windows that may be open on the desktop without using the mouse.

Jeremy
N8JJA


--

W0MN EN34rb 44.08226 N 92.51265 W

Hierro candente, batir de repente

HP Laptop


Re: force Windows focus

iain macdonnell - N6ML
 

On Tue, May 11, 2021 at 2:15 PM Andy - K0AF <folkjunk0@gmail.com> wrote:

Is there a way to program a keyboard sequence to force Windows 10 focus to a specific window when several applications are open? I'd like to be able to force focus to WinWarbler from the keyboard instead of grabbing the mouse, wiggling it to find the cursor, moving the cursor to the WinWarbler window (which may or may not be visible) and left clicking in the WinWarber window. Is there a way to force focus to a specific application within DXLabs or perhaps within Windows 10? If not, then maybe a 3rd party application?
https://www.autohotkey.com/ can do that, and much much more ;)

73,

~iain / N6ML


Re: force Windows focus

Richard Dodd
 

Alt + tab

K4krw

On Tue, May 11, 2021, 5:15 PM Andy - K0AF <folkjunk0@...> wrote:
Is there a way to program a keyboard sequence to force Windows 10 focus to a specific window when several applications are open? I'd like to be able to force focus to WinWarbler from the keyboard instead of grabbing the mouse, wiggling it to find the cursor, moving the cursor to the WinWarbler window (which may or may not be visible) and left clicking in the WinWarber window. Is there a way to force focus to a specific application within DXLabs or perhaps within Windows 10? If not, then maybe a 3rd party application?

Thanks!

73,
Andy - K0AF


Re: force Windows focus

Jeremy - N8JJA
 

There is a key sequence already in windows 10...if you hit Alt+Shift+Tab you can cycle through any windows that may be open on the desktop without using the mouse.

Jeremy
N8JJA


force Windows focus

Andy - K0AF
 

Is there a way to program a keyboard sequence to force Windows 10 focus to a specific window when several applications are open? I'd like to be able to force focus to WinWarbler from the keyboard instead of grabbing the mouse, wiggling it to find the cursor, moving the cursor to the WinWarbler window (which may or may not be visible) and left clicking in the WinWarber window. Is there a way to force focus to a specific application within DXLabs or perhaps within Windows 10? If not, then maybe a 3rd party application?

Thanks!

73,
Andy - K0AF


Re: Best way to Switch to a new Computer

Chuck, WS1L
 

Agreed.  I've done it several times.  There are a lot of steps, best to print them out and check them off as completed.  But, it is very thorough and covers every even remote eventuality.

73 de Chuck, WS1L



On Mon, May 10, 2021 at 6:24 PM Jeffrey griffin <kb2mjeff@...> wrote:

Hi Rick. Here’s what I used last summer to do the same thing….

 

 

https://www.dxlabsuite.com/dxlabwiki/MovingBetweenPCs

 

73 Jeff kb2m

 

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Richard Lawn
Sent: Monday, May 10, 2021 5:18 PM
To: DXLab@groups.io
Subject: [DXLab] Best way to Switch to a new Computer

 

Slowly but surely I'm migrating everything to a new computer. I wonder if someone can suggest the best way to do this with DXLabs Suite. I don't want to reinvent the wheel!
73


--
Rick, W2JAZ


Re: Support for Sun Expert radios?

Dave AA6YQ
 

+ AA6YQ comments below

you can find the user manual here : https://eesdr.com/en/products-en/transceivers-en/sunsdr2dx-en

+ Thanks, Damien!

73,

Dave, AA6YQ


Re: Best way to Switch to a new Computer

Jeffrey griffin
 

Hi Rick. Here’s what I used last summer to do the same thing….

 

 

https://www.dxlabsuite.com/dxlabwiki/MovingBetweenPCs

 

73 Jeff kb2m

 

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Richard Lawn
Sent: Monday, May 10, 2021 5:18 PM
To: DXLab@groups.io
Subject: [DXLab] Best way to Switch to a new Computer

 

Slowly but surely I'm migrating everything to a new computer. I wonder if someone can suggest the best way to do this with DXLabs Suite. I don't want to reinvent the wheel!
73


--
Rick, W2JAZ


Re: Best way to Switch to a new Computer

Gilbert Baron W0MN
 

 MovingBetweenPCs - DX Lab Suite Wiki

 

Outlook Laptop Gil W0MN

Hierro candente, batir de repente

44.08226N 92.51265W EN34rb

 

From: DXLab@groups.io <DXLab@groups.io> On Behalf Of Richard Lawn
Sent: Monday, May 10, 2021 16:18
To: DXLab@groups.io
Subject: [DXLab] Best way to Switch to a new Computer

 

Slowly but surely I'm migrating everything to a new computer. I wonder if someone can suggest the best way to do this with DXLabs Suite. I don't want to reinvent the wheel!
73


--
Rick, W2JAZ


--

W0MN EN34rb 44.08226 N 92.51265 W

Hierro candente, batir de repente

HP Laptop


Best way to Switch to a new Computer

Richard Lawn <rjlawn@...>
 

Slowly but surely I'm migrating everything to a new computer. I wonder if someone can suggest the best way to do this with DXLabs Suite. I don't want to reinvent the wheel!
73


--
Rick, W2JAZ


Re: IPv6

Peter Laws / N5UWY
 

On Sat, May 8, 2021 at 7:39 PM Stu Mitchell <stu@stu2.net> wrote:

Well, I think there are lots of advantages of moving to IPv6.... but
mostly from a large enterprise perspective. For example, large
enterprises are running out of RFC-1918 addresses. Interoperability is a
pain. For example, when two companies merge, they most likely have
"We're running out of IP space quickly and IPng is going to have to be
implemented in a couple of years." - Instructor (paraphrased) in the
first networking class I took in 1994.

RFC 1918 was a bad idea that only put off the inevitable. Our network
at the office is still solidly IPv4 but we just had a re-org and,
surprise, the incoming network has a 10-network that duplicates
addresses that already exist. Smart people warned everyone before i
was "law" -- https://datatracker.ietf.org/doc/html/rfc1627 No one
listened. And those that were in favor probably retired before the
reality of duplicate addresses everywhere became apparent.

I had occasion to configure some stuff on IPv6 for one of our
constituent groups at work and the more I played with it, the more I
wished we'd moved to IPv6 in the 1990s.

But I don't see IPv6 happening in the vast majority of amateur radio
stations in the near future. Given the nature of a certain percentage
of support requests on this and other lists, that's probably just as
well.

--
Peter Laws | N5UWY | plaws plaws net | Travel by Train!


Re: Support for Sun Expert radios?

Damien F5RRS
 

Hello Dave,


73 - Damien F5RRS

3481 - 3500 of 204773