Date   
Re: WAZ : DXkeeper does not show confirmed zone

F5PHW Phil BERGER
 

Hello again

Many thanks Dave for quick and clear answer.


Best 73


F5PHW Phil


Web page on http://f5phw.free.fr
F5PHW on FACEBOOK : https://www.facebook.com/phil.berger.75
WX in Nostang :
http://www.nostang.meteoamikuze.com/index.html
https://www.wunderground.com/personal-weather-station/dashboard?ID=IBRETAGN147

----- Mail original -----

De: "Dave AA6YQ" <@AA6YQ>
À: DXLab@groups.io
Envoyé: Vendredi 17 Août 2018 00:56:03
Objet: Re: [DXLab] WAZ : DXkeeper does not show confirmed zone

+ AA6YQ comments below

I just saw one thing tonight :

I was surprised to find that I was still needed Z01 on 40 CW.
So I made a search with DxView and saw that I have 3 QSO confirmed
via LoTW with WL7E, KL7RA and KL7SB. This 3 QSO are shown as
confirmed in DxKeeper.
But when I make a search in the "check progress" tab, I have zone 01
worked but unconfirmed.

I saw the same thing on 10m for Z01 and also for other bands and
zones.

In DxKeeper, when I go in "config", and "awards" tab, I have selected
for WAZ :

Mixed-Mixed
Mixed-SSB
Mixed-CW
Mixed-RTTY
Mixed-Digi
160M
6M
5-band WAZ
Realtime Award Progress

Any idea about this ?

+ A QSO confirmed via LoTW does not "count" for WAZ unless the QSO's
"LoTW Cfm" item includes the letter Z, which means that your QSO
partner specified his or her zone in the "Station Location" used to
submit your QSO to LoTW. See "Obtaining WAZ Credit" in

<https://www.dxlabsuite.com/dxlabwiki/WAZStatus>

+ If your QSO partner did not specify his or her CQ zone in the
"Station Location" used to submit your QSO to LoTW, you can contact
them and ask them to update their "Station Location" to specify a
zone, and then resubmit your QSO with the updated "Station
Location".

+ If one or more of the QSOs you site above is confirmed via LoTW and
does contain a "Z" in its "LoTW Cfm" item, let me know and we'll
take the next step in diagnosis.

73,

Dave, AA6YQ





Re: WAZ : DXkeeper does not show confirmed zone

Dave AA6YQ
 

+ AA6YQ comments below

I just saw one thing tonight :

I was surprised to find that I was still needed Z01 on 40 CW.
So I made a search with DxView and saw that I have 3 QSO confirmed via LoTW with WL7E, KL7RA and KL7SB. This 3 QSO are shown as confirmed in DxKeeper.
But when I make a search in the "check progress" tab, I have zone 01 worked but unconfirmed.

I saw the same thing on 10m for Z01 and also for other bands and zones.

In DxKeeper, when I go in "config", and "awards" tab, I have selected for WAZ :

Mixed-Mixed
Mixed-SSB
Mixed-CW
Mixed-RTTY
Mixed-Digi
160M
6M
5-band WAZ
Realtime Award Progress

Any idea about this ?

+ A QSO confirmed via LoTW does not "count" for WAZ unless the QSO's "LoTW Cfm" item includes the letter Z, which means that your QSO partner specified his or her zone in the "Station Location" used to submit your QSO to LoTW. See "Obtaining WAZ Credit" in

<https://www.dxlabsuite.com/dxlabwiki/WAZStatus>

+ If your QSO partner did not specify his or her CQ zone in the "Station Location" used to submit your QSO to LoTW, you can contact them and ask them to update their "Station Location" to specify a zone, and then resubmit your QSO with the updated "Station Location".

+ If one or more of the QSOs you site above is confirmed via LoTW and does contain a "Z" in its "LoTW Cfm" item, let me know and we'll take the next step in diagnosis.

73,

Dave, AA6YQ

WAZ : DXkeeper does not show confirmed zone

F5PHW Phil BERGER
 

Helle dear DxLabs users.

I just saw one thing tonight :

I was surprised to find that I was still needed Z01 on 40 CW.
So I made a search with DxView and saw that I have 3 QSO confirmed via LoTW with WL7E, KL7RA and KL7SB. This 3 QSO are shown as confirmed in DxKeeper.
But when I make a search in the "check progress" tab, I have zone 01 worked but unconfirmed.

I saw the same thing on 10m for Z01 and also for other bands and zones.

In DxKeeper, when I go in "config", and "awards" tab, I have selected for WAZ :

Mixed-Mixed
Mixed-SSB
Mixed-CW
Mixed-RTTY
Mixed-Digi
160M
6M
5-band WAZ
Realtime Award Progress

Any idea about this ?

MAny thanks

Hope my english was not too bad ...


73


F5PHW Phil


Web page on http://f5phw.free.fr
F5PHW on FACEBOOK : https://www.facebook.com/phil.berger.75
WX in Nostang :
http://www.nostang.meteoamikuze.com/index.html
https://www.wunderground.com/personal-weather-station/dashboard?ID=IBRETAGN147

Re: Elecraft K3 macros in filesection

Dave AA6YQ
 

+ AA6YQ comments below

I took your https://groups.io/g/DXLab/files/Command%20Sequences%20and%20Sliders/Elecraft/K3%20Power.txt slider file and tried to load it, Error message appeared.
I tried also this change
https://groups.io/g/DXLab/topic/16630182#149922
also not working.
But I dont give up, and see it must be a problem with the conversion of CRLF between the English and the German version of Windows Editor-

When I load your file onnce again and paste it to another editor, there was not only one line, but each line separate.
copied this in a new txt file and load it again and voila it works.

Perhaps useful for other, who use a German Windows

+ The file you cite above uses a single Carriage Return (0A) for line breaks instead of a Carriage Return followed by a Line Feed (0A0D); this won't work anywhere. I deleted it, and renamed the corrected file that you uploaded. Thanks!

73,

Dave, AA6YQ

New file uploaded to DXLab@groups.io

DXLab@groups.io Notification <DXLab+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the DXLab@groups.io group.

File: K3 Power_1.txt

Uploaded By: Alex OE3JTB

Description:
Slider for K3 to adjust power

You can access this file at the URL:
https://groups.io/g/DXLab/files/Command%20Sequences%20and%20Sliders/Elecraft/K3%20Power_1.txt

Cheers,
The Groups.io Team

Re: Elecraft K3 macros in filesection

Alex OE3JTB
 

Hi Dave
I took your https://groups.io/g/DXLab/files/Command%20Sequences%20and%20Sliders/Elecraft/K3%20Power.txt slider file and tried to load it, Error message appeared.
I tried also this change 
https://groups.io/g/DXLab/topic/16630182#149922
also not working.
But I dont give up, and see it must be a problem with the conversion of CRLF between the English and the German version of Windows Editor-

When I load your file onnce again and paste it to another editor, there was not only one line, but each line separate.
copied this in a new txt file and load it again and voila it works.

Perhaps useful for other, who use a German Windows

tnx 73 Alex OE3JTB

Re: Unable to connect to server for upgrade to commander

Kent Olsen
 

Dave 
Thanks
73
Kent
N6WT


On Thu, Aug 16, 2018 at 9:01 AM Dave AA6YQ <aa6yq@...> wrote:
+ AA6YQ comments below

When I use a browser and go to "http://www.ambersoft.com/DXLab/Commander/Commander1374Update.exe" I get ERR_CONNECTION_TIMED_OUT.

+ I perform test installations from both web sites before announcing any upgrade. I just tested the above URL using my web browser, and it works correctly. I suspect that the problem lies on your end, or in your ISP.

      73,

             Dave, AA6YQ




Re: Unable to connect to server for upgrade to commander

Dave AA6YQ
 

+ AA6YQ comments below

When I use a browser and go to "http://www.ambersoft.com/DXLab/Commander/Commander1374Update.exe" I get ERR_CONNECTION_TIMED_OUT.

+ I perform test installations from both web sites before announcing any upgrade. I just tested the above URL using my web browser, and it works correctly. I suspect that the problem lies on your end, or in your ISP.

73,

Dave, AA6YQ

Re: Unable to connect to server for upgrade to commander

Dave AA6YQ
 

+ AA6YQ comments below

When I try to upgrade Commander to the latest 1374 I get

"error while downloading:unable to connect to server; Upgrade aborted"

I can download the upgrade through a browser though.

+ If your web browser can access the Commander upgrade but the Launcher cannot, that sounds like anti-malware interference. Please reboot Windows into "Safe Mode with Networking". Can the Launcher now upgrade Commander?

73,

Dave, AA6YQ

Re: How to turn OFF DXView Update notifications for select databases. eQSL. DXView Database Updates

Dave AA6YQ
 

If a database is either not installed or obsolete, the Databases tab of DXView's Configuration window will always inform you of the fact. An option to disable this would be counterproductive, in my opinion.

73,

Dave, AA6YQ

-----Original Message-----
From: DXLab@groups.io [mailto:DXLab@groups.io] On Behalf Of Mark W2OR via Groups.Io
Sent: Thursday, August 16, 2018 8:52 AM
To: DXLab@groups.io
Subject: [DXLab] How to turn OFF DXView Update notifications for select databases. eQSL. DXView Database Updates

Question: How can a DXView user turn off the "new DB" database update notification that apply to just the eQSL updates?

Background: I do not use the eQSL system. When DXView announces the availability of new databases, using the very helpful red letter notification alerts, I then update all databases that have an update, including eQSL. It's great to get the updates in place and active, because the databases that are used are so very, very helpful. Thank you. For over ten years I've updated every database available, even though I never use eQSL databases. If one opts not to update a database, such as eQSL, the red letter notification alert stays active, seemingly forever. It'd be good to have an option to deactivate the alerts just for those databases that are not used. Yes, I looked on the web for a way to do that, and looked in the instructions for such an option, but my search skills are apparently not as good as they used to be. Thanks for your help with this. /Mark

Re: Elecraft K3 macros in filesection

Dave AA6YQ
 

+ AA6YQ comments below

I found in the file section macros for K3 https://groups.io/g/DXLab/files/Command%20Sequences%20and%20Sliders/Elecraft , are they still up to date. I loaded eg. the split macro, but it doesnt work a I awaited,

+ User-defined command sequences and sliders in this Group's Files section are provided on an "as is" basis. I don't own a K3, for example, and thus cannot check out every submitted K3 command sequence to confirm that it works correctly. You should review any user-defined sequence or slider you download to confirm that it meets your objectives, consulting your transceiver's CAT documentation as necessary.

73,

Dave, AA6YQ

Re: Unable to connect to server for upgrade to commander

Kent Olsen
 

Yes Steve I use the Launcher also.

When the Launcher updates it downloads from "http://www.ambersoft.com/DXLab/Commander/Commander1374Update.exe". Im thinking there is a problem with the server?


Thanks
73
Kent
N6WT


On Thu, Aug 16, 2018 at 8:32 AM Peter Krüger <pkfalkensee@...> wrote:
Stop the internet security suite - like Norton, Kasperky ... - and it
may work again - there are often "challenges" after upgrades from such
scanner or Windows .


Am 16.08.2018 um 17:21 schrieb Kent Olsen:
> When I use a browser and go to
> "http://www.ambersoft.com/DXLab/Commander/Commander1374Update.exe" I
> get ERR_CONNECTION_TIMED_OUT.
>
>
> Thanks
> 73
> Kent
> N6WT
>
>
> On Thu, Aug 16, 2018 at 8:12 AM Kent Olsen <kilo6dko@...
> <mailto:kilo6dko@...>> wrote:
>
>     Aborted several times. no joy.
>
>     Thanks
>     73
>     Kent
>     N6WT
>
>
>     On Thu, Aug 16, 2018 at 8:09 AM WA8Y Steven
>     <stevenlinley1@... <mailto:stevenlinley1@...>> wrote:
>
>         Just abort and try it again.
>
>
>
>         On Thu, Aug 16, 2018, 10:32 AM Kent Olsen <kilo6dko@...
>         <mailto:kilo6dko@...>> wrote:
>
>             When I try to upgrade Commander to the latest 1374 I get
>
>             "error while downloading:unable to connect to server;
>             Upgrade aborted"
>
>             I can download the upgrade through a browser though.
>
>
>             Thanks
>             73
>             Kent
>             N6WT
>
>





Re: Unable to connect to server for upgrade to commander

Peter Krüger
 

Stop the internet security suite - like Norton, Kasperky ... - and it may work again - there are often "challenges" after upgrades from such scanner or Windows .


Am 16.08.2018 um 17:21 schrieb Kent Olsen:

When I use a browser and go to "http://www.ambersoft.com/DXLab/Commander/Commander1374Update.exe" I get ERR_CONNECTION_TIMED_OUT.


Thanks
73
Kent
N6WT


On Thu, Aug 16, 2018 at 8:12 AM Kent Olsen <kilo6dko@... <mailto:kilo6dko@...>> wrote:

Aborted several times. no joy.

Thanks
73
Kent
N6WT


On Thu, Aug 16, 2018 at 8:09 AM WA8Y Steven
<stevenlinley1@... <mailto:stevenlinley1@...>> wrote:

Just abort and try it again.



On Thu, Aug 16, 2018, 10:32 AM Kent Olsen <kilo6dko@...
<mailto:kilo6dko@...>> wrote:

When I try to upgrade Commander to the latest 1374 I get

"error while downloading:unable to connect to server;
Upgrade aborted"

I can download the upgrade through a browser though.


Thanks
73
Kent
N6WT

Re: Unable to connect to server for upgrade to commander

WA8Y Steven
 

I always upgrade from the launcher. 


On Thu, Aug 16, 2018, 10:32 AM Kent Olsen <kilo6dko@...> wrote:
When I try to upgrade Commander to the latest 1374 I get 

"error while downloading:unable to connect to server; Upgrade aborted"

I can download the upgrade through a browser though.


Thanks
73
Kent
N6WT

Re: Unable to connect to server for upgrade to commander

Kent Olsen
 

When I use a browser and go to "http://www.ambersoft.com/DXLab/Commander/Commander1374Update.exe" I get ERR_CONNECTION_TIMED_OUT.


Thanks
73
Kent
N6WT


On Thu, Aug 16, 2018 at 8:12 AM Kent Olsen <kilo6dko@...> wrote:
Aborted several times. no joy.

Thanks
73
Kent
N6WT


On Thu, Aug 16, 2018 at 8:09 AM WA8Y Steven <stevenlinley1@...> wrote:
Just abort and try it again.



On Thu, Aug 16, 2018, 10:32 AM Kent Olsen <kilo6dko@...> wrote:
When I try to upgrade Commander to the latest 1374 I get 

"error while downloading:unable to connect to server; Upgrade aborted"

I can download the upgrade through a browser though.


Thanks
73
Kent
N6WT

Re: Unable to connect to server for upgrade to commander

Kent Olsen
 

Aborted several times. no joy.

Thanks
73
Kent
N6WT


On Thu, Aug 16, 2018 at 8:09 AM WA8Y Steven <stevenlinley1@...> wrote:
Just abort and try it again.



On Thu, Aug 16, 2018, 10:32 AM Kent Olsen <kilo6dko@...> wrote:
When I try to upgrade Commander to the latest 1374 I get 

"error while downloading:unable to connect to server; Upgrade aborted"

I can download the upgrade through a browser though.


Thanks
73
Kent
N6WT

Re: RCForb with DXLab

WA8Y Steven
 

Yes, Roger helped me.

I am busy now but I could help you later.

Steven WA8Y 

On Wed, Aug 15, 2018, 10:20 PM Don Inbody <ad0k@...> wrote:
Has anyone successfully integrated the RCForb remote ham radio client with DXLab. I am guessing there is a way to use the client to interface with Commander, but have not yet cracked the code. The RCForb client has a K-3 mode that I gather is the secret.

I have access to a neighbor's remote station and would like to be able to use it from time to time while out of town, but keep be able to use DXLab applications to support it.

73, Don AD0K

Re: Unable to connect to server for upgrade to commander

WA8Y Steven
 

Just abort and try it again.



On Thu, Aug 16, 2018, 10:32 AM Kent Olsen <kilo6dko@...> wrote:
When I try to upgrade Commander to the latest 1374 I get 

"error while downloading:unable to connect to server; Upgrade aborted"

I can download the upgrade through a browser though.


Thanks
73
Kent
N6WT

Unable to connect to server for upgrade to commander

Kent Olsen
 

When I try to upgrade Commander to the latest 1374 I get 

"error while downloading:unable to connect to server; Upgrade aborted"

I can download the upgrade through a browser though.


Thanks
73
Kent
N6WT

Re: RCForb with DXLab

John Battin
 

I will be very interested in your findings.

John K9DX

 


From: DXLab@groups.io <DXLab@groups.io> on behalf of Don Inbody <ad0k@...>
Sent: Wednesday, August 15, 2018 9:33:44 PM
To: DXLab@groups.io
Subject: Re: [DXLab] RCForb with DXLab
 
Thank you. I will work on this and report back to the group.

73, Don AD0K