Date   

Re: Unable to connect to server for upgrade to commander

WA8Y Steven
 

I always upgrade from the launcher. 


On Thu, Aug 16, 2018, 10:32 AM Kent Olsen <kilo6dko@...> wrote:
When I try to upgrade Commander to the latest 1374 I get 

"error while downloading:unable to connect to server; Upgrade aborted"

I can download the upgrade through a browser though.


Thanks
73
Kent
N6WT


Re: Unable to connect to server for upgrade to commander

Kent N6WT
 

When I use a browser and go to "http://www.ambersoft.com/DXLab/Commander/Commander1374Update.exe" I get ERR_CONNECTION_TIMED_OUT.


Thanks
73
Kent
N6WT


On Thu, Aug 16, 2018 at 8:12 AM Kent Olsen <kilo6dko@...> wrote:
Aborted several times. no joy.

Thanks
73
Kent
N6WT


On Thu, Aug 16, 2018 at 8:09 AM WA8Y Steven <stevenlinley1@...> wrote:
Just abort and try it again.



On Thu, Aug 16, 2018, 10:32 AM Kent Olsen <kilo6dko@...> wrote:
When I try to upgrade Commander to the latest 1374 I get 

"error while downloading:unable to connect to server; Upgrade aborted"

I can download the upgrade through a browser though.


Thanks
73
Kent
N6WT


Re: Unable to connect to server for upgrade to commander

Kent N6WT
 

Aborted several times. no joy.

Thanks
73
Kent
N6WT


On Thu, Aug 16, 2018 at 8:09 AM WA8Y Steven <stevenlinley1@...> wrote:
Just abort and try it again.



On Thu, Aug 16, 2018, 10:32 AM Kent Olsen <kilo6dko@...> wrote:
When I try to upgrade Commander to the latest 1374 I get 

"error while downloading:unable to connect to server; Upgrade aborted"

I can download the upgrade through a browser though.


Thanks
73
Kent
N6WT


Re: RCForb with DXLab

WA8Y Steven
 

Yes, Roger helped me.

I am busy now but I could help you later.

Steven WA8Y 

On Wed, Aug 15, 2018, 10:20 PM Don Inbody <ad0k@...> wrote:
Has anyone successfully integrated the RCForb remote ham radio client with DXLab. I am guessing there is a way to use the client to interface with Commander, but have not yet cracked the code. The RCForb client has a K-3 mode that I gather is the secret.

I have access to a neighbor's remote station and would like to be able to use it from time to time while out of town, but keep be able to use DXLab applications to support it.

73, Don AD0K


Re: Unable to connect to server for upgrade to commander

WA8Y Steven
 

Just abort and try it again.



On Thu, Aug 16, 2018, 10:32 AM Kent Olsen <kilo6dko@...> wrote:
When I try to upgrade Commander to the latest 1374 I get 

"error while downloading:unable to connect to server; Upgrade aborted"

I can download the upgrade through a browser though.


Thanks
73
Kent
N6WT


Unable to connect to server for upgrade to commander

Kent N6WT
 

When I try to upgrade Commander to the latest 1374 I get 

"error while downloading:unable to connect to server; Upgrade aborted"

I can download the upgrade through a browser though.


Thanks
73
Kent
N6WT


Re: RCForb with DXLab

John Battin
 

I will be very interested in your findings.

John K9DX

 


From: DXLab@groups.io <DXLab@groups.io> on behalf of Don Inbody <ad0k@...>
Sent: Wednesday, August 15, 2018 9:33:44 PM
To: DXLab@groups.io
Subject: Re: [DXLab] RCForb with DXLab
 
Thank you. I will work on this and report back to the group.

73, Don AD0K


Re: How to turn OFF DXView Update notifications for select databases. eQSL. DXView Database Updates

John Bastin K8AJS
 

On 16Aug 2018, at 08:51, Mark W2OR via Groups.Io <reston2010mm-orders@...> wrote:

Question: How can a DXView user turn off the "new DB" database update notification that apply to just the eQSL updates?

Background: I do not use the eQSL system. When DXView announces the availability of new databases, using the very helpful red letter notification alerts, I then update all databases that have an update, including eQSL. It's great to get the updates in place and active, because the databases that are used are so very, very helpful. Thank you. For over ten years I've updated every database available, even though I never use eQSL databases. If one opts not to update a database, such as eQSL, the red letter notification alert stays active, seemingly forever. It'd be good to have an option to deactivate the alerts just for those databases that are not used. Yes, I looked on the web for a way to do that, and looked in the instructions for such an option, but my search skills are apparently not as good as they used to be. Thanks for your help with this. /Mark
This was in the distant past, but I remember at one time if you wanted to not have certain database notifications, the method was to delete the database in question.

In this case, if you don’t want any notifications for eQSL, you can just go to DXLab -> DXView -> Databases and delete eQSLAG.mdb. It shouldn’t try to update a database that isn’t there.

Dave can comment on this, whether this method still works and doesn’t damage anything.

Hope this helps.

73,


John K8AJS
jbastin1@...


How to turn OFF DXView Update notifications for select databases. eQSL. DXView Database Updates

Mark W2OR <reston2010mm-orders@...>
 

Question:  How can a DXView user turn off the "new DB" database update notification that apply to just the eQSL updates?

Background:  I do not use the eQSL system.  When DXView announces the availability of new databases, using the very helpful red letter notification alerts, I then update all databases that have an update, including eQSL.  It's great to get the updates in place and active, because the databases that are used are so very, very helpful.  Thank you.  For over ten years I've updated every database available, even though I never use eQSL databases.  If one opts not to update a database, such as eQSL, the red letter notification alert stays active, seemingly forever.  It'd be good to have an option to deactivate the alerts just for those databases that are not used.  Yes, I looked on the web for a way to do that, and looked in the instructions for such an option, but my search skills are apparently not as good as they used to be.   Thanks for your help with this. /Mark







New file uploaded to DXLab@groups.io

DXLab@groups.io Notification <DXLab+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the DXLab@groups.io group.

File: K3 Tune on_off.txt

Uploaded By: Joe

Description:
K3 switch tune on/off (LED grn/red)

You can access this file at the URL:
https://groups.io/g/DXLab/files/Command%20Sequences%20and%20Sliders/Elecraft/K3%20Tune%20on_off.txt

Cheers,
The Groups.io Team


Re: RCForb with DXLab

Björn SM7IUN
 

I have. It is some time ago, though. 

Having Commander control the RCForb client via the virtual K3 CAT interface works well.  

CW keying was somewhat problematic so I ended up using RCForb's internal CW keyboard.

It has been a while so perhaps the KY CAT command is now implemented in the client and Winwarbler can also be used for CW.
That would be neat. 

73,

Björn SM7IUN

2018-08-16 4:20 GMT+02:00 Don Inbody <ad0k@...>:

Has anyone successfully integrated the RCForb remote ham radio client with DXLab. I am guessing there is a way to use the client to interface with Commander, but have not yet cracked the code. The RCForb client has a K-3 mode that I gather is the secret.

I have access to a neighbor's remote station and would like to be able to use it from time to time while out of town, but keep be able to use DXLab applications to support it.

73, Don AD0K



New file uploaded to DXLab@groups.io

DXLab@groups.io Notification <DXLab+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the DXLab@groups.io group.

File: K3 Earphone and loudspeaker toggle on off.txt

Uploaded By: Joe

Description:
K3 toogle earphone and speaker on/off

You can access this file at the URL:
https://groups.io/g/DXLab/files/Command%20Sequences%20and%20Sliders/Elecraft/K3%20Earphone%20and%20loudspeaker%20toggle%20on%20off.txt

Cheers,
The Groups.io Team


New file uploaded to DXLab@groups.io

DXLab@groups.io Notification <DXLab+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the DXLab@groups.io group.

File: Earphone and loudspeaker toggle on off.txt

Uploaded By: Joe

Description:
K3 toogle earphone and speaker on/off

You can access this file at the URL:
https://groups.io/g/DXLab/files/Command%20Sequences%20and%20Sliders/Elecraft/Earphone%20and%20loudspeaker%20toggle%20on%20off.txt

Cheers,
The Groups.io Team


New file uploaded to DXLab@groups.io

DXLab@groups.io Notification <DXLab+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the DXLab@groups.io group.

File: K3 Split up5 (VFO A TX & VFO B RX).txt

Uploaded By: Joe

Description:
K3 split up 5, sub on and reverse

You can access this file at the URL:
https://groups.io/g/DXLab/files/Command%20Sequences%20and%20Sliders/Elecraft/K3%20Split%20up5%20%28VFO%20A%20TX%20%20&%20VFO%20B%20RX%29.txt

Cheers,
The Groups.io Team


New file uploaded to DXLab@groups.io

DXLab@groups.io Notification <DXLab+notification@...>
 

Hello,

This email message is a notification to let you know that a file has been uploaded to the Files area of the DXLab@groups.io group.

File: K3 Split up5 (VFO A TX & VFO B RX).txt

Uploaded By: Joe

Description:
K3 split up 5, sub on and reverse

You can access this file at the URL:
https://groups.io/g/DXLab/files/K3%20Split%20up5%20%28VFO%20A%20TX%20%20&%20VFO%20B%20RX%29.txt

Cheers,
The Groups.io Team


Elecraft K3 macros in filesection

Alex OE3JTB
 

Good morning
I found in the file section macros for K3 https://groups.io/g/DXLab/files/Command%20Sequences%20and%20Sliders/Elecraft , are they still up to date. I loaded eg. the split macro, but it doesnt work a I awaited, 
73 Alex


Commander 13.7.4 is available

Dave AA6YQ
 

This release

- corrects a regression that when controlling an IC-7300, IC-7610, IC-7850, or IC-7851, prevents the Spectrum-Waterfall window's
"Reference Level" slider from being updated when changing band segments (tnx to Björn SM7IUN)

- when controlling a Flex Signature radio, if the radio is powered down, doesn't create errorlog.txt file entries reporting
callsigns with missing Flex spot numbers

- includes an S-meter file for the IC-7851 (tnx to Julio W4HY)

- enables user control of text colors and surface colors for user-defined command sequence buttons

- provides <ButtonTextColor> and <ButtonSurfaceColor> commands for use in user-defined command sequences

- updates the CommandSequences.htm documentation file


Notes:

1. The "User-defined Command Sequence" window provides a new "Button Colors" panel that enables you to set a user-defined sequence
button's text and surface color. The new <ButtonTextColor> and <ButtonSurfaceColor> commands enable execution of a command sequence
to change button text and surface color.

2. Update your firewall and anti-malware applications to consider this new version of Commander to be "safe"

3. If this upgrade doesn't work correctly, see the "After an Upgrade" section of
<http://www.dxlabsuite.com/dxlabwiki/ApplicationStoppedWorking>

4. After upgrading, to revert to the previous version of Commander, see
<http://www.dxlabsuite.com/dxlabwiki/RevertApplicationVersion>


Commander 13.7.4 is available via the DXLab Launcher and via

<http://www.dxlabsuite.com/download.htm>

73,

Dave, AA6YQ


Re: RCForb with DXLab

Don Inbody AD0K
 

Thank you. I will work on this and report back to the group.

73, Don AD0K


Re: RCForb with DXLab

Dave AA6YQ
 

+ AA6YQ comments below

Has anyone successfully integrated the RCForb remote ham radio client with DXLab. I am guessing there is a way to use the client to interface with Commander, but have not yet cracked the code. The RCForb client has a K-3 mode that I gather is the secret.

I have access to a neighbor's remote station and would like to be able to use it from time to time while out of town, but keep be able to use DXLab applications to support it.

+ I have no personal experience, but Google found this:

<https://www.remotehams.com/forums/index.php?topic=1048.0>

+ You might contact the ops involved in the above thread for additional guidance.

73,

Dave, AA6YQ


RCForb with DXLab

Don Inbody AD0K
 

Has anyone successfully integrated the RCForb remote ham radio client with DXLab. I am guessing there is a way to use the client to interface with Commander, but have not yet cracked the code. The RCForb client has a K-3 mode that I gather is the secret.

I have access to a neighbor's remote station and would like to be able to use it from time to time while out of town, but keep be able to use DXLab applications to support it.

73, Don AD0K

31701 - 31720 of 211082