Re: Another Pathfinder/QRZ problem?


Ken Bandy <kj9b@...>
 

Thanks for the quick reply, Anela. I had made the changes you suggested
when the problem first surfaced a week or so ago. However, I had since
changed my workspaces without updating the workspace settings, so they had
reverted to their previous settings. I had reset the settings on the QRZ
"button" on Pathfinder, but had forgotten about the one in the config panel.
That took care of it.

Thanks again!

73,
Ken
KJ9B

-----Original Message-----
From: Anela Karacic [mailto:anelae74ee@...]
Sent: Monday, August 31, 2009 9:56 AM
To: dxlab@...
Subject: Re: [dxlab] Another Pathfinder/QRZ problem?


They made some changes on QRZ.com
Now you need to change URL on Pathfinder.
Puth this one:
http://www.qrz.com/db/{TargetCallsign}
You need to change this on CONFIG, and do not forget todo the same on a QRZ
botton (ctrl + left mouse botton)
GL and 73
Anela - e74ee




________________________________
From: kbandy <kj9b@...>
To: dxlab@...
Sent: Monday, August 31, 2009 2:18:07 PM
Subject: [dxlab] Another Pathfinder/QRZ problem?


Please excuse me if this has already been hashed over, but I scanned through
recent messages on the yahoogroup, and didn't see any mention of this
problem.

I hadn't been on the rig for a few days, and Sunday evening looked to see
what I could find. When starting up Pathfinder, I noticed there were a
couple of updates it wanted to do. After doing those, I worked a little
PSK, and when WinWarbler would try to find a name and QTH by using
Pathfinder, I would get a script error from QRZ.com. If I went to the
Pathfinder window, the QRZ opening web page would be up with the target
callsign in the Pathfinder window, at which time I could click on the "QRZ"
button in Pathfinder, and it would go to the proper record.

I figured the PC might have something "sideways", so I rebooted the PC.
After reboot and restarting the suite, I had the same problems. When trying
it this morning, I don't get the script error, but QRZ still only goes to
the opening page, and I get a dxlab window that pops up and says the target
callsign wasn't found (xx0xx not found).

I have all the latest versions of all components of the suite.

Thanks in advance for any help.

73,
Ken
KJ9B

Join DXLab@groups.io to automatically receive all group messages.