Re: Rotor control using ARCO with Orion
Joe Subich, W4TV
ARCO needs an IP address, Port and Control Protocol specifiedtoggle quoted messageShow quoted text
on the Settings -> LAN tab.
If using IP, DXView Rotator Control tab needs the IP Address
and Port in the ARCO box and either Arco Hygain or Arco Yaesu
in the Model box. Hy-Gain/Yaesu should match the "Control
Protocol" specified in Arco's Setup -> LAN tab.
... Joe, W4TV
On 2022-08-09 5:52 PM, bill steffey NY9H wrote: