Re: ft857
|
Joe K2UF
Thanks Dave,
toggle quoted message
Show quoted text
All the settings are correct. I suspect the ct62 cable. I got it cheap on ebay from an off shore vendor. I am going to get one from HRO and try again. I want to use this radio mobile using home brew software to control from a laptop. Connected it to commander to see if it was my software or a hardware problem. Thanks for the info. 73 Joe K2UF -----Original Message-----
From: DXLab@groups.io [mailto:DXLab@groups.io] On Behalf Of Dave AA6YQ Sent: Thursday, March 18, 2021 3:19 PM To: DXLab@groups.io Subject: Re: [DXLab] ft857 + AA6YQ comments below Any one using commander control for a Yeasu ft857 xcvr. I have tried using straight thru and cross over adapter just in case. I am using a CT62 cable I got on EBay(ugh!). + I've used Commander to control my FT817 via a Yaesu CT62 cable. The FT817, FT857, and FT897 all use the same CAT instruction set. + Step-by-step instructions are here: https://www.dxlabsuite.com/dxlabwiki/TranceiverControlYaesu 73, Dave, AA6YQ |
|
|