Re: DXLabs, WSJT-X (ft8) and Yaesu FT-950
toggle quoted messageShow quoted text
This is with WinWarbler and WSJT-X connected through Commander.
From: DXLab@groups.io [mailto:DXLab@groups.io] On Behalf Of g4wjs
Sent: Monday, June 15, 2020 7:36 PM
Subject: Re: [DXLab] DXLabs, WSJT-X (ft8) and Yaesu FT-950
On 15/06/2020 22:29, Jackson McNees wrote:
Very pleased to see this discussion. Sometime back I used a Yeasu FT-920 with SignalLinkUSB to the mike port and worked fine. Recently decided to get back active again but decided to switch to the data port to free up mike and to start using DxLab Suite. Although the FT-920 is in DATA mode, after transmitting, the 920 changes to USB. Looked high and low through Commander docs to see if something there but found nothing. Based on this discussion, will have to see if I have to set up a command sequence to change mode after transmitting. Hopefully this will give the fix I need!
is this with WinWarbler, WSJT-X, or some other data comms application?
Join DXLab@groups.io to automatically receive all group messages.