Re: LotW "U" status
Iain,toggle quoted messageShow quoted text
Your Account/Your Activity has no record of the upload in the File Processed table. As noted in a previous posting, the notepad report labels all of the QSOs as "not accepted", so it seems reasonable that there is no record of the upload on the web page.
So I am back to the ten reasons why an uploaded QSO is not accepted by LotW per the DebugUnacceptedLotW - DX Lab Suite Wiki web page. Looking at the filtered QSOs on the DXKeeper Log QSOs tab, and as best I can determine, these nine QSOs:
- have a valid callsign
- have a valid band (all are 160M)
- have a valid mode (MODE is SSB for all of them)
- have a valid date and time (the 0700 hour of 2/27/2011)
- the callsign certificate as viewed via TQSL is valid from the 1970's until 2030
- satellite name and propagation mode are blank
- DXKeeper's filtered Log QSOs tab shows there are not "identical copies of the QSO in your log"
I used the LotW web site's Your QSOs tab to verify the QSOs are not already in LotW.
Further advice appreciated.
On 5/17/2020 6:03 PM, iain macdonnell - N6ML wrote:
You can tell if an uploaded log was processed by checking under Your Account -> Your Activity. Click on "Result" for each upload to see if it was successful, or if any QSOs were rejected for some reason. 73, ~iain / N6ML On Sun, May 17, 2020 at 2:28 PM Steve K8JQ <stevejq@...> wrote:I should be OK with all of those reasons except maybe the first one. How can I determine if the LotW server has processed the QSOs? Steve, K8JQ On 5/17/2020 5:03 PM, iain macdonnell - N6ML wrote: Hi Steve, Have you ruled out each of the 10 potential reasons listed on that page? 73, ~iain / N6ML On Sun, May 17, 2020 at 1:46 PM Steve K8JQ <stevejq@...> wrote: Thanks Iain. That process seems to have worked to a point. I selected nine QSOs from an hour in a contest in 2011. I clicked the Update from LotW button . . . there was a progress bar . . . then a notepad summary of what happened. All nine QSOs were "not accepted". They remain at U and R on the Log QSOs tab. I have done the single QSO update a number of times. It works with some QSOs. Others it does not. Can you help me figure out what's wrong? Steve, K8JQ On 5/17/2020 2:32 PM, iain macdonnell - N6ML wrote: On Sun, May 17, 2020 at 10:42 AM Steve K8JQ <stevejq@...> wrote: I, too, have a lot of QSOs with LotW SENT set to U. I didn't mean to set their to SENT field to U, I somehow fumble fingered it. The Corrective Actions section of the DebugUnacceptedLotW - DX Lab Suite Wiki web page describes how to deal with U QSOs one at a time or en masse. One at a time is impractical for the number of QSOs involved. I would prefer to process them in blocks -- a month or several months or perhaps a year at a time, depending on the number of QSOs. Is there a way to use the en masse method for selected blocks of QSOs as opposed to processing every U QSO in the database? You could add a step between 'a' and 'b': Click on 'Adv' to open the "Advanced Sorts, Filters, & Modifiers" window. In the "UTC Filter" panel, enter an after/before range, then *Control*-click on the "Filter" button. The Control-click "refines" the filter already in place (as opposed to replacing it). You should then be able to proceed to "Update from LotW". 73, ~iain / N6ML DebugUnacceptedLotW - DX Lab Suite Wiki On 5/16/2020 10:26 PM, iain macdonnell - N6ML wrote: On Sat, May 16, 2020 at 4:37 PM Dave AA6YQ <aa6yq@...> wrote: + AA6YQ comments below I have several LotW QSLs with the status of "U". What does that indicate, i.e. something is incorrect with the information that I supplied, the computer needs more time, .. ? + As shown in <https://www.dxlabsuite.com/dxkeeper/Help/Items.htm#LoTW%20sent> + it means "QSO has been uploaded to LoTW, but not yet accepted by LoTW". I would say "not yet known to have been accepted" (since that would not be known until a QSL sync has been performed). There's also this: http://www.dxlabsuite.com/dxlabwiki/DebugUnacceptedLotW 73, ~iain / N6ML