toggle quoted messageShow quoted text
do you have any contacts in that N1MM+ log that didn't not originate in WSJT-X?
If not, it's probably easier to just create a new log in N1MM+ and import the ADIF files from both instances of WSJT-X into it. Export your SSB contest contacts from DXKeeper and import them to that N1MM log too. Generate the Cabrillo file from there, and it will be formatted correctly.
Then export one ADIF from N1MM, and import it to DXKeeper with duplicate checking enabled.
That should get everything in sync.
73 de W0ZF
On Sat, Sep 21, 2019 at 6:22 PM Walter Miller, AJ6T <aj6t@...
In last weekend's September VHF contest I attempted to run SO2R with two
instances of WSJT-X controlled by N1MM+ per the setup instructions in
the N1MM+ documentation. That ran OK for a short while before N1MM+ and
the two instances of WSJT-X stopped communicating and stopped logging.
Up to that point, five separate logs came into play (N1MM+ log and an
ADIF and "Contest" log from each of the two WSJT-X instances). At that
point I abandoned the N1MM+ and WSJT-X slaved operation and reverted to
my original standalone setup in order to at least get an electronic log
in DXKeeper. My standalone setup does not make use of N1MM+ at all. It
just uses two instances of WSJT-X (one for 6m and the other for 2m/70cm)
with two instances of JTAlertX feeding the contest QSOs into DXK. SSB
QSos were put manually into DXK. Now I need to assemble a consolidated
Cabrillo log to submit my contest results. Here's my plan to do that,
but I'd like some advice first before I go astray:
1. Start with a DXK backup (of course)
2. Export the runt N1MM+ log in ADIF format for import into DXK
3. Slice out the relevant portions of each WSJT-X ADIF log for import
4. Have DXK generate the Cabrillo file (after I tag each of the relevant
QSOs with a CONTEST ID).
Do I need any sort of special ADIF header for the carved-out ADIF files
from the WSJT-X logs (I notice that the N1MM+ ADIF header includes a
Contest Name)? Or can I just get by with a null header, <EOH> and <EOR>?
Step 5 might be to import a DXK ADIF back into N1MM+ to have it do dupe
checking and scoring, but that is a question for the N1MM+ reflector.
73, Walt, AJ6T