Re: Commander - ICOM 7300 - Waterfall problem

Rick Ellison

You need to change the baud rate on the radio and then open Commander and change it there..


73 Rick n2AMG


From: [] On Behalf Of Joseph Willis via Groups.Io
Sent: Saturday, September 14, 2019 7:15 PM
Subject: [DXLab] Commander - ICOM 7300 - Waterfall problem


Hello Dave and others - I have successfully connected DXLAB Commander to my computer from my Icom 7300 for everything except the Waterfall screen.  The documentation explains that I need to set the baud rate at 115200 (Silicon Labs CP210X) port.  However, when I try to bump up the speed from 9600 on the Config tab in Commander, I lose the connection, even though I previously set the port to 115200 on my computer !  Googling, I found this on the Silicon Labs web site:

"Icom radios use the version drivers.  Windows update has installed the Universal Windows Driver.  This drivers reports a maximum baud rate of 23800 when used with Microsoft .NET", but there is no fix. 

Have others been able to overcome this limitation with their 7300's ?

Thank you, 


Join to automatically receive all group messages.