Re: CW-R problem


Joe Subich, W4TV
 

Ron,

On 2019-07-20 5:34 PM, Dave AA6YQ wrote:
Here's the CAT command that Commander is sending to your FTDX-3000:

20-Jul-2019 01:32:37 > CIVModule.SendCommand: MD07;
*HOWEVER* since you have configured your FTdx3000 (menu 60) to make
CW-L the default CW mode, you *DO NOT* want SC/Commander to issue MD07:
(CW-R) as that is *CW-U*. You want SC/Commander to issue MD-3: (CW)
as that is *CW-L*.

If you have configured the FTdx3000 with MENU 60 = LSB you want
SC -> CONFIG -> General -> Transceiver mode with no Digital Mode
Application connected -> CW Spot set to *CW*.

73,

... Joe, W4TV


On 2019-07-20 5:34 PM, Dave AA6YQ wrote:
Thanks for sending me the Commander errorlog.txt file, Ron.
Here's the directive that SpotCollector is sending to Commander when you double-clicked on the Spot Database Entry for a station
operating in CW:
20-Jul-2019 01:32:37 > DDEServer.LinkExecute: 000xcvrfreqmode<xcvrfreq:9> 10104.0<xcvrmode:4>CW-R
So you've properly configured SpotCollector to specify that CW-R be used.
Here's the CAT command that Commander is sending to your FTDX-3000:
20-Jul-2019 01:32:37 > CIVModule.SendCommand: MD07;
As described on page 11 of the FTDX-3000 CAT manual, that's the correct CAT command for placing an FTDX-3000 into CW-R mode.
SpotCollector and Commander are thus performing correctly. If your FTDX-3000 is not correctly responding to the MD07; CAT command,
I suggest that you contact Yaesu Technical support.
73,
Dave, AA6YQ
-----Original Message-----
From: Ron KU7Y [mailto:ron@...]
Sent: Friday, July 19, 2019 9:52 PM
To: 'Dave AA6YQ'
Subject:
Took me forever to find this. Wasn't looking for the CI-V before Commander!
:-)
Thanks for all your help.
OK, back in my hole,
Ron, KU7Y
Mountain Home, ID DN23dc
CW Ops #1211
QRP ARCI #8829
SOC #2
Idaho DX Association
Ron@...

Join DXLab@groups.io to automatically receive all group messages.