Re: Flex has released SmartSDR 2.5.1 and SmartSDR 3.0.27

Jeffrey griffin

I've been seeing the same thing for almost the last year or so with 2 different computers all running WIN10, and 4 different radios. A Flex 6500, Flex VU5K, Elecraft K3, and an Icom IC-9100. I simply shut down WSJT-X and bring it back up again. That fixes it for awhile...

73 Jeff kb2m

-----Original Message-----
From: [] On Behalf Of Dave AA6YQ
Sent: Thursday, June 13, 2019 4:27 PM
Subject: Re: [DXLab] Flex has released SmartSDR 2.5.1 and SmartSDR 3.0.27

+ AA6YQ comments below

This may not be a Flex related problem. I see something like this once in a while with my Icom 7600 on FT8. The symptoms are the radio goes into transmit but no tones are sent—to me that seems to implicate WSJTX. While I think it only happens on a new QSO initiation, it is so infrequent that I haven’t been able to figure out with any certainty the pattern to when/why it happens.

+ I've also seen that with my 7800. The radio switches from RX to TX, but no tones are transmitted.

+ Bill G4WJS, is there a way to identify the cause of this behavior?


Dave, AA6YQ

Join to automatically receive all group messages.