Re: corrected grid square to LOTW

Dave AA6YQ
 

AA6YQ comments below
-----Original Message-----
From: Ron Wilcox [mailto:rglogan73@...]
Sent: Thursday, December 21, 2017 9:03 PM
To: @AA6YQ
Subject: Re: corrected grid square to LOTW

no, it gave the grid square for the qth i put in dxkeeper in error, there fore when they downloaded from lotw it was wrong.

OK. Then to correct your uploaded QSOs, to the following:
1. using TQSL, update your "Station Location" to specify the correct grid square

2. in DXKeeper

2a. on the "QSL Configuration" window's LoTW tab, make sure the corrected "Station Location" is selected in the TQSL panel

2b. on the Main window's QSL tab, set the "QSL Via" panel to LoTW

2c. filter the Log Page Display to contain all (and only) your QSOs that were submitted to LoTW with the wrong grid square

2d. on the Main widow's QSL tab, click the "Add All" button; this will populate the QSL Queue with your QSOs that were submitted to LoTW with the wrong grid square

2e. on the Main widow's QSL tab, click the "Upload to LoTW" button

73,

Dave, AA6YQ

Join DXLab@groups.io to automatically receive all group messages.