No Receive in WinWarbler

Alan Swinger
 

Dave - Hooked headphone to the K3 Line Out (goes to Computer Soundcard Input) and I hear RTTY signals all OK. I also changed to a different cable and still no Receive indications on WW except for a dot in the middle of the circular screen in the RTTY Receive section of WW.
It looks as if something is turned off but don't recall changing any settings.
Thoughts? - alan K9MBQ


-----Original Message-----
>From: Dave AA6YQ <aa6yq@...>
>Sent: Dec 18, 2017 7:24 PM
>To: 'Alan Swinger' <awswinger@...>
>Cc: 'Elecraft Support' <support@...>, 'Dale Farmer - Elecraft' <dale@...>
>Subject: RE: RTTY Receive issue
>
>Try listening to the soundcard inputs with a pair of headphones or an active speaker.
>
>     Dave
>
>-----Original Message-----
>From: Alan Swinger [mailto:awswinger@...]
>Sent: Monday, December 18, 2017 5:58 PM
>To: Dave AA6YQ
>Cc: 'Elecraft Support'; 'Dale Farmer - Elecraft'
>Subject: RE: RTTY Receive issue
>
>Would appreciate any suggestions how best to do that.
>Thanks - Alan
>
>
>-----Original Message-----
>>From: Dave AA6YQ <aa6yq@...>
>>Sent: Dec 18, 2017 5:53 PM
>>To: 'Alan Swinger' <awswinger@...>
>>Cc: 'Elecraft Support' <support@...>, 'Dale Farmer - Elecraft' <dale@...>
>>Subject: RE: RTTY Receive issue
>>
>>>>>AA6YQ comments below

>>-----Original Message-----
>>From: Alan Swinger [mailto:awswinger@...]
>>Sent: Monday, December 18, 2017 5:27 PM
>>To: Elecraft Support; Dale Farmer - Elecraft; aa6yq@...
>>Subject: RTTY Receive issue
>>
>>Elecraft - Have used my K3 w/o problems for yrs on Digital modes, but today for reasons unknown signals are not showing on the screen of DXLAB WinWarbler (WW). I can transmit all OK using WW. I checked the cables from my computer to the K3 and continuity is all OK. MIC SEL I on LINE IN and gain is at 20 where it has been.
>>
>>I have not changed configurations and problem is on all bands . . . not seeing or decoding RTTY or PSK (if there were any since FT8 seems to have displaced them)!? Pls advise.
>>
>>Dave - Seems like I have seen some updates to DXLAB recently. Could those be the cause? Any suggestions?
>>
>>>>>There has not been a recent update of WinWarbler.
>>
>>>>>The usual cause of this is a Windows Update that scrambles your soundcard settings so that WinWarbler doesn't see any signals, but first verify that audio output from your K3 is present at your soundcard inputs.
>> 
>>       73,
>>
>>             Dave, AA6YQ
>>
>

Join DXLab@groups.io to automatically receive all group messages.