Re: SpotSources Login


eddy on5jk
 

You did hit the nail on the head Dave. (As always of coarse)
I thought i did copy the settings from the old PC to the new one.
But now i see, due to the dimensions of the boxes containing 
It showed only as you saw on my screenshot,
The closing angle bracket was not visible, and thus not copied to the new config.
If only those  boxes had been a little bit wider, showing the whole content, this would never have happened.
Evidently, i should have been looking more carefully for the content of all them boxes. Mea culpa.
Thank you so much, problem solved now.
Eddy ON5JK
 

From: ' Dave AA6YQ' aa6yq@... [dxlab]
Sent: Sunday, February 5, 2017 11:59 AM
To: dxlab@...
Subject: RE: [dxlab] SpotSources Login
 
 

If you look at the screenshot you sent me, you'll see that the first two Cmd textboxes contain


evidently without a closing angle bracket.

73,

Dave, AA6YQ

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]
Sent: Sunday, February 05, 2017 5:16 AM
To: dxlab@...
Subject: Re: [dxlab] SpotSources Login

Dave as far as i can see, there is nothing wrong with my settings for starting and connecting SC.
I did send a screenshot of my settings on the new PC to you at ambersoft.com.
You know Murphy lives here too.
73 Eddy ON5JK


From: ' Dave AA6YQ' aa6yq@... [dxlab]
Sent: Saturday, February 4, 2017 8:45 PM
To: dxlab@...
Subject: RE: [dxlab] SpotSources Login



>>>AA6YQ comments below

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, February 04, 2017 5:21 AM
To: YahooGroup DXLabs
Subject: [dxlab] SpotSources Login

Dave,
The Suite is working fine on the new machine.
I have one minor issue, probably not related directly to the Suite.
But i’m begging for help.
In the Config of SC, for both of the wanted Spotsources (Clusters) “enable” and “auto” are checked.
Nevertheless, i dayly have to Login manually.
Message says: Error in source parameter TelnetCluster 0 (and 1) Cmd When i connect the former PC, there is not such a problem.
What could be set wrong Dave? Error surely will be mine.

>>>on the Configuration window's "Spot Sources" tab, one of the following textboxes contains an improperly formatted macro: Username, Password, Cmd, or "Initial Cluster command".

>>>The specific formatting error is a missing "closing angle bracket" character:

>>>The macros that can be used in the above textboxes are documented here:



73,

Dave, AA6YQ

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7998 / Virus Database: 4756/13889 - Release Date: 02/04/17

No virus found in this message.
Checked by AVG - www.avg.com
Version: 2016.0.7998 / Virus Database: 4756/13894 - Release Date: 02/05/17

Join DXLab@groups.io to automatically receive all group messages.