Re: Icom RS232 interface from KG7SG


Tom Brouard <stagehand@...>
 

Hi Dave,

Thanks again for your help. I realize that this is sidetracking you from
your software projects but you are the only one that I know that understands
the interface.

I have done all that you suggested already with no results. I have tried the
message window as well with no results either. The Radix is at hexadecimal.
Receive message box is checked as well.

I do not have a scope but I do have a meter.

Thank you

73 de KB2VNB

-----Original Message-----
From: Dave, AA6YQ [mailto:dhb@...]
Sent: Wednesday, April 11, 2001 12:23 AM
To: dxlab@...
Subject: RE: [dxlab] Icom RS232 interface from KG7SG


Tom,

The radio sends data

- if its "CI-V Transceive" setting is on, and you change frequency or
change modes

- in response to a query from Commander

If you didn't set "CI-V Transceive" to "on" (using the 746 menu, as
described in the manual), then you must configure CI-V Commander to
continuously query the radio by checking the "Continuous Frequency and Mode
Interrogation" box in Commander's General configuration tab

Alternatively, you can set "CI-V Transceive" to "on", in which case
continuous queries are unnecessary

If neither of the above configurations results in Commander displaying your
radio's frequency and mode, let me know and we'll take the next step - which
is to check the message window.

Just in case: do you have a scope or meter?

73,

Dave, AA6YQ


-----Original Message-----
From: Tom Brouard [mailto:stagehand@...]
Sent: Tuesday, April 10, 2001 19:32 PM
To: Dxlab
Subject: [dxlab] Icom RS232 interface from KG7SG


I am running CI-V Commander version 1.2.2 using the KG7SG interface I just
made. I am able to control the ICOM 746 via the computer but I am not
able
to receive any data from the radio.

I have double checked all wiring and software and radio config settings
with
no luck.

I am still suspicious that it is in the wiring but I am hoping that it is
something simple in the software or at the radio that I may have
overlooked.

Suggestions from any is gratefully welcomed

Thank you

73 de KB2VNB


Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.






To unsubscribe from this group, send an email to:
dxlab-unsubscribe@...



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Join DXLab@groups.io to automatically receive all group messages.