I would like to get in touch with some folks in British Columbia that built a DD repeater from a pair of ID-1 radios. That repeater, unlike the "official" Icom DD repeater, was full duplex (because it

The following files and folders have been uploaded to the Files area of the D-STAR23cm@groups.io group. /Digital Voice & Data Radios/IC-905 Brochure - Pre-Release.pdf By: Mark Thompson <wb9qzb_groups@

ARRL/TAPR DCC (Digital Communications Conference) Charlotte, NC September 16 - 18 DCC Presentation Schedule DCC Presentation Schedule DCC YouTube Livestream DCC YouTube Livestream TAPR Digital Live St

After messing about with the settings in Menu>Set>Network>IP Address, and after connecting my IC-9700 to my shack PC via a LAN cable, I've managed to successfully upload a picture from the ST-4001W so

Hi, I've just ordered an IC-9700 and, although D-Star on 23cm wasn't one of the reasons I decided to get this model, if it's got the capability, I'd like to have a go at using it. I am already on 23cm

Several (many?) years ago I received a note describing a DStar ID-1 setup where two ID-1 radios were hooked back to back to make a simple cross frequency relay. This was in BC, in the Islands or near

New Icom IC-905 VHF/UHF/SHF All Mode SDR Transceiver 144 / 430 (440) / 1200 / 2400 / 5600 MHz / 10 GHZ Analog / Digital Voice Modes Announced at Ham Fair, Tokyo, August 20 - 21 Icom IC-905 Introductio

Greetings all, Can anyone identify the "HVIN" code (usually 4 digits followed by some zeros and ones) associated with the IC-9700. All of the other current DStar radios have one, but it doesn't seem t

Any nets, DSTAR or FM simplex activity in the Los Angeles area? 73 W6CJ

As I relate in this blog post - https://www.n8gnj.org/2021/07/frustrating-day-with-the-id-1s.html, I now own three used ID-1s. Two of the three did not come with brackets for mounting the radio. Can a

Has anyone successfully connected to a 1.2 GHz DD mode repeater with an IC-9700 and accessed the internet? if so, would you elaborate on how you got it working. The manual is less than clear on how to

Any D-Star (or SSB, or FM) activity in Los Angeles Grid DM04VC? I can hit 1 or 2 FM repeaters, worked a SOTA portable, can't hit any D-Star repeaters from my loc. 73, W6CJ

Greetings. Just got a new IC-9700 and am new to this list. Currently looking for DSTAR DV repeaters in Southern CA but have found none so far. 73 W6CJ

Hello, I have a ID-RP2C/RSRP3 G3 and ID-RP2D 1.2Ghz DD for sale. Please contact me via email if interested. 73, Robert AE5YG

Wondering what antenna you are using for 1.2 GHz for a Base or a Repeater? I've set up a Comet GP-21 for event use at times. However, fiberglass antennas don't seem to last as long as some antennas su

Hi, I’ve just received a used ID-1 that I bought off of eBay. Strangely, I can only tune from 1260 MHz to 1300 MHz. All the documentation I can find says that the range should be 1240-1300 MHz. I also

Hello All, I am trying to connect a laptop to my IC-9700 setup in DD mode. The radio is connected to WX4GPB module A. How does one find the static address assigned to the laptop? I have found absolute

ARRL/TAPR Digital Communications Conference (DCC) September 17-18, 2021 Virtual (Online) ARRL / TAPR DCC Conference / Forum Schedule (Tentative) ARRL / TAPR Virtual (Online) DCC Registration Conferenc

All: I'm working on a future story for my newsletter (https://zeroretries.substack.com) about the failed promise of the Icom ID-1 system. Part 1 I'm aware that there were (or still are) "ID-1 networks

We put in about 5-6 DD Mode “repeaters”/nodes in Minneapolis/St Paul to support database application access at scale for the Medtronic Twin Cities Marathon in around 2007. It worked well. The range wa