This new group is for information and feedback on Cross Country Wireless products and software. This includes the APRS TNC Digi Tracker and the APRS Messenger program. Regards and 73, Chris Mouldin

The next version of APRS Messenger will have several new features. These include APRS over PSK-63 for use on the HF bands, a RF to internet gateway and compatibility with all versions of Windows, In

I've just had the first contact over HF PSK-63 APRS using APRS Messenger. I've uploaded a screen print of the program in the Photos section. Ross, G6GVI lives in Bolton about 4 miles away and used a

Hi all Does anyone know how I can connect my digi tracker to a Tait 530/c I have been told that you just lift off the CTCSS board and use them pins. I have purchased the cable and 9 pin connector,

I've uploaded the latest versions of the 30m APRS frequency plan diagrams produced by Mike Zwingl, OE3MZC. Mike has kindly added 10.1497 MHz as the 30m frequency for APRS over PSK-63. They are in the

Hi, I've uploaded APRS Messenger version v2.26 to the file section. This has many changes over the last version v1.86 released. The biggest change is that APRS over PSK-63 has been added. This has

When you're in the code messing with the screen layouts, would it be possible to add a "Clear" option to the individual message log panels? That way I could clear it after having read what's there

Chris Just a couple observations from a recent install of messenger (but not on air yet). I notice the comm port selection is 1 to 8. Should this be just a number to type in as if you are using a us

Chris, I just noticed that APRS Messenger uses a ToCall of APSK63. You should drop a note to Bob Bruninga to get this registered as your program. Right now all APS prefixed ToCalls are registered

I just copied the following text out of my HF traffic window. Apparently, I had coped fragments from G4HYG-2 and G0CTO-10 before because I generated my KJ4ERJ-15 packet this morning when I poked "Se

Previous attempts to use the PSK modes for APRS using an add-on that the late Roger Barker G4IDE wrote for UI_View have been disappointing as no error checking or AFC was used in the original add-on.

Greets: When I get home from work today, I plan on installing the software and give it a whirl. I have a dedicated 30m dipole so we'll see what happens! ...DOUG KD4MOJ Tallahassee, FL USA

Here at my QTH.... got to figure out how to TX.... running an Icom 756Pro3. ...DOUG KD4MOJ

Yep Lynn I'm copying quite a bit here Just picked up WB8KP-2. 30m seems to busy here today with different modes near this segment.... lot of pactor. ...DOUG KD4MOJ

First transatlantic message sent and ack received: G4HYG-2>APRSK63::NH7C-3 :Hello Sid!{30 NH7C-3yPSKao3::G4HYG-2 :ack30 This is only 12 hours after I put the program on the website! By the way

Following a bug report by Ross, G6GVI this morning I've fixed a minor bug (Runtime 6 error message) that might occur when many messages are sent and received in a session. I've uploaded the new versi

Hi Chris   Thanks for coming back to me.     If the copy I got here was correct using my 20M as antenna I heard the following stations  (it was only 5 UK stations)   G4HYG-2

Hi to Chris and the group. Thanks Chris for making a very interesting program. I am one of the people who can't make full use of it yet as I am not using the "default sound card" with my radio. I have

Hello to all, I am new to the group and I am QRV on 30 meters using this software. Not quite sure of the connection to the APRS Servers or to APRS.fi or if there is any at all? I had a nice QSO wit

Hello Chris, Thank you for your quick response. I have since put my position coordinates in my beacon in the same manner as I have them in the UI -View32 software. So far today I have not seen any ot