Hi Chris Just placed an order for one of your HF Multicouplers 50 KHz-35 MHz. The PayPal confirmation does not confirm what I had actually bought, could you please confirm I have bought the correct ve

I need to replace the ethernet cable on my CCW active loop as the existing one has become trapped and cannot be freed from its position without cutting the cable. Background: annoying workmen thought

Sent from Mail for Windows 10 Reading the mail this morning, raised an interest In the serial number of my sdr-4+. It is not external that I can see? If I require It, must I strip the box? I purchased

Chris, my SDR-4 is serial number 0028. You had it back a long time a go to modify it. What was the final frequency coverage and did you remove the isolated antenna input? Do you have this record? I ca

I have just ordered the balun and 390R resistor unit to make a CCW Inverted-U antenna. http://www.crosscountrywireless.net/terminated_inverted_u.html Has anyone experience of them? Is it at all direct

Hi Chris Can i order the Loop Antenna Amplifier + yet? ie: have you stock yet? Also just to confirm what i need to order. I have a loop already im going to use, loop leads terminate in a BNC (its plug

Hi. Does anybody know where in the Manchester area I can get an aluminium or copper tube rolled properly into a loop ? Thanks. Gordon.

Hi Chris Did you manage to test the loop amp i sent back for VHF etc? Thanks Les

Good morning. Thank you all for your replys. These days I live in a very small retirement flat, its really difficult to actually do anything. I was thinking that if I were to get a loop rolled profess

Hi Chris, Just got around to setting up my LA+ received in May and it works intermittently. I think I've traced it to a 22R resistor on the USB power board which looks as it it has avoided the solderi

Following some recent discussions on this and other forums I've spent some time looking at the original design of the Loop Antenna Amplifier. The original design used a DC coupled amplifier with a ver

Feedback on the The Loop Antenna Amplifier + but only 1 day. I have an airwave loop that ive been using with my Wellbrook ALA-100 and also played using an MLA-30, I have to say via the SDRplay Dx bias

Hi Chris, I sent an email late yesterday with a loop question. To info@. But not sure if you are open and checking those emails so I am just checking. Regards, Paul Sayer G0VKT

Hi, Does anyone know where I can get instructional videos and also tips in general for the High Z Amplifier? Any videos? Thanks

SDR Console works with the Griffin Power-Mate, also works with Midi DJ controllers (I have tried a Hercules E2 and a DJ Tech VT-101, both work fine). I have also used a Contour Shuttle Xpress with SDR

Hi all, So I see APRS messenger is no longer being developed / it’s moved to the unsupported realm. What’s the recommendation for gating MFSK16 and PSK63 APRS messages to the internet? Is there a repl

SCAM

Does the diet include the consumption of spam? ================================ Need help with SDR Console? If you have a problem, Use the camera icon top left to take a screenshot, Then send to this

Welcome to CCW Simon, A very thoughtful and well-considered first post. You have correctly established that the naysayers cannot provide scientific evidence of why their MLA's are "better". Well done

Hi This seems to be a hot subject on here.. A..people complain lack of hf on ccw and mla-30 better B..people complain ccw directional.. lets start with A..i will make this all short. as with all recei