I just decoded a picture on scottie2 not the best but did get a picture. NC5O Russell __________________________________ Sent from eM Client | www.emclient.com

I moved to the SSTV frequency looking for you signal no good on 15m did see some signals on 20m, robot63 and a few scottie2, I was unable to decode any of the signals, not very good hr. I'm on 20m now

Off to bed will only be Rx on 5.403.50 CUL NC5O-66 Russell __________________________________ Sent from eM Client | www.emclient.com <http://www.emclient.com/get>

The frequency is 5403.5 only manual beaconing. I'm beacon 30 min +/- NC5O-66 Russell __________________________________ Sent from eM Client | www.emclient.com

60m dead in daytime will try later night. I'm back on 30m now NC5O-60 Russell __________________________________ Sent from eM Client | www.emclient.com <http://www.emclient.com/get>

I'l be in the house for some time now and be trying to beacon 30 min +/- NC5O Russell __________________________________ Sent from eM Client | www.emclient.com <http://www.emclient.com/get>

Hi Can the SDRs available work as a panadapter for an Icom IC-R8500? Many thanks Tony

Hi all. I was wondering if I could use my receiver with my Chromebook laptop. Would anyone be able to point me in the right direction? Many thanks, Paul.

I've recently written 5 small SDR programs for Linux for our SDR-4+ and Sentinel 2 SDR receivers. They will also work with the SoftRock receivers and transceivers. These use the GNU Radio software ava

I've recently updated the MFSK-16 page on my site. This material is mostly aimed towards builder types and the curious :) There is some useful info for working with Bluetooth dongles. The three main d

I tried to mail Chris but that bounced ... What is the insertion loss between say 32 kHz .... 80 MHz for the multicoupler? We are in the process to connect multiple transceivers to a single antenna an

After the screwup last weekend due to a flakey driver for the uBlox GPS I was using, I am trying 60 meters APRS again this week. Starting Tuesday 26 June, I am driving from central Michigan to Rice La

After the screwup last weekend due to a flakey driver for the uBlox GPS I was using, I am trying 60 meters again this week. Starting Tuesday 26 June, I am driving from central Michigan to Rice Lake, W

BOB AF2DX

How many times have you been told that you can't use wirewound resistors for RF? Many times? On this web page I describe a technique I've developed to use the inductance in wirewound resistors as part

As most of the regular readers of this list know, I have been experimenting with HF AX.25 APRS and APRS Messenger MFSK16 on the 60-meter band (rather than the customary 30-meters used for HF APRS). To

Greetings from West Africa... I'm experimenting with APRS Messenger on HF/30 meters. I'm running an Icom IC-7300. I did set the PSK audio frequency as recommended to 2100. The dial frequency I have en

This coming weekend (16-17 June 2018) will be a "double-header" ham fest weekend in Michigan. On Saturday 16 June, I will be traveling to Midland Michigan (about 65 Miles/105Km nearly due north of my

What does this do on transmit, not familiar with it. POB/K8LEN

Starting this weekend, I will be on a road trip that includes testing HF APRS on 60-meters. I will be departing at 0800 local (US EDT/1300 UTC) on Sunday 10 June. The first day drive will be from my Q