Hi Chris Just a heads up I've sent an email to you which may well get caught by your infamously strict spam prevention service. Can you take a look when you get a chance! Happy New Year! 73 de Greg M6

1. There seems a increase in robust packet aprs, in EUROPE and a slight increase in USA, any chance we can add robust packet to the operating modes in cross country wireless. 2. Any operating frequenc

Getting a CCW loop soon and starting preparation, initially in the loft but i have a pole at the side of my extension that is 3m high and im going to extend it to 4.5m high as that will push it above

I have ordered the outdoor loop as eventually thats where its going, In the meantime i planned to mount it on a rotator on a small stub mast in the loft, I have just measured the pitch of the roof in

Dear Chris Just fired off an email to you. Unfortunately the despite being brought down in height, near the house and being sandbagged the wind manafrf to gust over the triood on which my active loop

I have been messing with js8call and it is a pretty neat mode for very weak signal use. I wonder if it's possible to add this digital mode to aprs messenger?

We have just released a new version of the Broadband Active Antenna. This version 3 antenna is 800mm long and now uses a 16mm diameter fibre glass tube to reduce wind loading over the earlier designs.

Hi Chris and everybody, I'm having trouble with a Cross Country Wireless HF Active Loop I just bought, and I'm looking for help. I'm finding some differences in RX at all HF bands when comparing it to

Many customers ask us for a power supply for our Active Antennas and Multicouplers. With the recent EU directive on energy efficiency all the small linear "wall wart" type power supplies are no longer

Recently we have been asked to develop amplifiers and HF Multicouplers for use in multi-operator contest stations. Following this project we are developing a new product for Beverage and Loop on Groun

HAS anyone used another frequency such as 40 mters on 80 for cross country messenger? POB/K8LEN

Following all the feedback on the original one-off indoor version of our HF Active Loop antenna we are building a batch of them next week as a new product. The web page with details of the new antenna

Hi Chris and all, I have a CCW antenna isolator and was thinking of using it between an ldg rt100 remote coax tuner and a 4:1 balun / inverted L . There could be high swr across the isolator, will thi

DOES LINUX WORK ON APRS MESSENGER POB/K8LEN

John K0CQW went on a HF APRS road trip to Fargo, ND today. Here's a screen grab of his return trip - all positions via MFSK-16 on 30m

Sometimes we are asked to do one-off versions of our products for special applications, very often it helps push the development of our products into new areas. Recently I was asked by a short wave li

Following customer feedback we now make two versions of our Receiver front end protection unit. A new VHF version covering 30 to 300 MHz is now available and the frequency range of the original versio

I normally default everything involved with NMEA serial GPS data to 4800 baud, since that is the "official" data rate for the NMEA standard. (Even though many hardware devices and a log of software of

I have been seeing some testing going thur my station (SMSGTE to KF6LMD) and some numbers. Who is SMSGTE ? but it seams to be working for them. Anyone know who is SMSGTE are. Russell NC5O ____________

As I mentioned before, I have archived every version of APRS Messenger from ver 2.35 onward. After installing and un-installing multiple versions of APRS Messenger, I have located the previous version