I have a question. Is it necessary to remove the crankshaft to remove the front half section of the bellhousing? It looks like after removing the 5 mounting bolts it would be able to be lowered howeve

I have a Hot Shot / Super Sport Hood For Sale $200 plus shipping

Just in from Rick Alexander Gary Cochrane and I have been monitoring the flood of cancellations, and increasing health regulations by Riverside County, related to the rapid spread of the Covid-19 viru

Been trying to deal with my Carter equipped Crosley "Starts then cuts out after a few seconds" Found a W-O rebuild service manual on the internet. The manual lists several uses for the W-O. None of th

Rick Alexander sent me the following today. Very bad news for our club! We had a sinking feeling when Dave's invitation to the Spring Meet was returned as "undeliverable". Indeed David had passed on D

Spring is right around the corner, time to start getting the Crosley batteries charged up and put those Winter projects in to high gear. Here is the latest CotM. http://crosleyautoclub.com/

Please see www.crosleygarage.com for the newest photos. More to be posted over the weekend. frank

Not a pro Crosley story but probably true of a lot of early post war Crosley that were used for harder duty than they were capable of doing. https://www.autoweek.com/car-life/classic-cars/a31070092/do

Hello All, This Saturday, February 29, the Crosley will be transformed into an Art Car at the The Gasparilla Festival of the Arts in Tampa Florida. The event concludes on March 1. I will be posting ph

Dozens of antique cars will take to the road on Saturday, June 6, as the 29th Orphan Car Tour gets underway. This year’s route runs from Burkittsville, Md. to Bluemont, Virginia, where participants wi

I just finished measuring my valve clearance. I have two exhaust valves at .012 and one intake valve at .009. All other valves are in spec. Just wondering if this is really bad and would it make them

Crosley Fans, I work for a contractor that is interested in innovative ways of making an engine block, specifically methods that don't require casting. I immediately thought of the COBRA. Are there an

Good evening, Crosley Fans! I'm the guy that posted about the CD Wagon electric conversion last month. I'm just now doing the grunt work that goes with any restoration, and I'm still many moons away f

Going through some repairs on my Crosley engine I discovered someone must have broken what I thought was the pulley bolt but after removing the pulley and checking out a spare engine that I have I see

Can anyone tell me what the size of the standard size piston is for the 1947 cast iron block engine?

I need a new Carter carb for my newly purchased 1952 Station Wagon. I need a recommendation for a new or rebuild purveyor. Thanx, Skip D

I just purchased a tidy ’52 Super Station Wagon. It had a 12 volt electric fuel pump installed on the left front fender. I purchased a new original equipment mechanical one from Service Motors. Just a

There is a spring that I found resting on the frame under the car by the brake pedal area. Attached is a photo of the spring (broken) as well as a photo of page 36, figure 28 in the Crosley Manual whi

Jim Oliver passed last Friday. He was at many National and Regional CAC shows over the years. His 47 Red Roundside was a favorite of mine, but his VC with a clear hood was also a show favorite. https:

I'm finding that the Facebook group has lots of great photos and dialog. This discussion board does as well, but there seems to be a lot more activity on Facebook recently. (Am I wrong?) Any advice fo