|
Photo From Wauseon 2020 2 messages
A few members that couldn't take canceled for an answer for the Crosley Nationals showed up in Wauseon and held the UnOfficial Cocid-19 Nationals. Here is a picture of the cars and attedese (socially
A few members that couldn't take canceled for an answer for the Crosley Nationals showed up in Wauseon and held the UnOfficial Cocid-19 Nationals. Here is a picture of the cars and attedese (socially
|
By Jim Bollman
·
|
|
Rewiring 1952 Crosley Super SW 3 messages
On the wiring diagram, I believe that the TR. notation on say WHITE - RED TR. means a White wire with a Red tracer mark. However, can anyone tell mean what the CR. notation means on WHITE - BLK CR. TR
On the wiring diagram, I believe that the TR. notation on say WHITE - RED TR. means a White wire with a Red tracer mark. However, can anyone tell mean what the CR. notation means on WHITE - BLK CR. TR
|
By Tilden Drinkard
·
|
|
Free 1947 Sedan - NC 11 messages
The owner knows what he has here is his description. No engine. "I realize it probably isn't worth the trouble of someone getting it but I want to try. The best thing about it is probably the "chrome"
The owner knows what he has here is his description. No engine. "I realize it probably isn't worth the trouble of someone getting it but I want to try. The best thing about it is probably the "chrome"
|
By Jim Bollman
·
|
|
Thursday ice cream run 5 messages
Since we couldn't have the traditional run to Tiny's today, my wife and I hit up the local Carvel in honor of the date. We needed a couple dozen more Crosleys for it to look right.
Since we couldn't have the traditional run to Tiny's today, my wife and I hit up the local Carvel in honor of the date. We needed a couple dozen more Crosleys for it to look right.
|
By Tom Gerhard
·
|
|
Torque Value for Crosley Lug Bolts 2 messages
I was asked the question of what the torque value for a Crosley lug bolt is and I didn't have an answer. I told him that torquing wheel lugs is a fairly new thing and never thought of in the 40s and 5
I was asked the question of what the torque value for a Crosley lug bolt is and I didn't have an answer. I told him that torquing wheel lugs is a fairly new thing and never thought of in the 40s and 5
|
By Jim Bollman
·
|
|
Hot Shot pops out of gear 7 messages
Hi, My modified Hot Shot won't stay in gear, if I hit a bump or get off and on the gas it comes out of gear. The previous owner put in a remote shifter, not sure if it's this shifter or the transmissi
Hi, My modified Hot Shot won't stay in gear, if I hit a bump or get off and on the gas it comes out of gear. The previous owner put in a remote shifter, not sure if it's this shifter or the transmissi
|
By Mike P
·
|
|
Transmission pops out of gear 5 messages
HI, My '51 Hot Shot wouldn't stay in 2nd or 3rd gear when I got it. I was told the shifter poppets were bad so sent it to Butch who did a nice job with it. Now it stays in second but still pops out of
HI, My '51 Hot Shot wouldn't stay in 2nd or 3rd gear when I got it. I was told the shifter poppets were bad so sent it to Butch who did a nice job with it. Now it stays in second but still pops out of
|
By Mike P
·
|
|
1952 Crosley CD Grease points diagram 5 messages
As a new owner of a 1952 CD, I'd like to know if there is a lubrication diagram for grease points existing somewhere. Thanx
As a new owner of a 1952 CD, I'd like to know if there is a lubrication diagram for grease points existing somewhere. Thanx
|
By Tilden Drinkard
·
|
|
New Crosley of the Month
New CotM up. Nice trio of cars for July. http://crosleyautoclub.com/ If you are registered for the Virtual Nationals you have to July 5th to get your photo entry in showing the show placard. Lots of p
New CotM up. Nice trio of cars for July. http://crosleyautoclub.com/ If you are registered for the Virtual Nationals you have to July 5th to get your photo entry in showing the show placard. Lots of p
|
By Jim Bollman
·
|
|
Fisher Pierce Bearcat 55 Boat Engine Parts Wanted 8 messages
I have a Fisher Pierce Bearcat 55 and I'm looking for parts that might have been removed for conversion to automobile use. Yes, I know it's a stretch, but ya never know!
I have a Fisher Pierce Bearcat 55 and I'm looking for parts that might have been removed for conversion to automobile use. Yes, I know it's a stretch, but ya never know!
|
By Matt Tritt
·
|
|
Latest on 2020 CAC National Virtual Meet 11 messages
As hopefully everyone knows by now the live Nationals were canceled, we are working hard to make the best we can out of this year by putting on a Virtual Show and if we can get all the pieces in place
As hopefully everyone knows by now the live Nationals were canceled, we are working hard to make the best we can out of this year by putting on a Virtual Show and if we can get all the pieces in place
|
By Jim Bollman
·
|
|
McClure's Modified - Hemmings Story
Here is another Dan Strohl story on Crosley. This is a lost story if anyone recognizes this H Mod and know where it is.https://www.hemmings.com/stories/2020/06/29/lost-and-found-overflow-mcclures-modi
Here is another Dan Strohl story on Crosley. This is a lost story if anyone recognizes this H Mod and know where it is.https://www.hemmings.com/stories/2020/06/29/lost-and-found-overflow-mcclures-modi
|
By Jim Bollman
·
|
|
My Crosley video for July 5th Petersens Global on line Cars & Coffee
Hello, I made a less than 2 minute video about the Crosley Art Truck ( www.crosleygarage.com) that I submitted to The Petersen Automotive Museum for the July 5 online show. I will not know until the 4
Hello, I made a less than 2 minute video about the Crosley Art Truck ( www.crosleygarage.com) that I submitted to The Petersen Automotive Museum for the July 5 online show. I will not know until the 4
|
By frank
·
|
|
New Crosley of the Month 3 messages
Here is June CotM http://crosleyautoclub.com/
Here is June CotM http://crosleyautoclub.com/
|
By Jim Bollman
·
|
|
What is the best method to remove FOR brake drum 7 messages
For the most stubborn rear brake drum, use an axle drive nut with a hammer, or put a hub puller on the four drum bolt holes? Use heat from a torch on the taper? Thanks, these hubs haven't been removed
For the most stubborn rear brake drum, use an axle drive nut with a hammer, or put a hub puller on the four drum bolt holes? Use heat from a torch on the taper? Thanks, these hubs haven't been removed
|
By jeff
·
|
|
Side one piece windows on a 1950 CD 13 messages
Hello, So I have broken 3 replacement windows so far in 4 years on my Crosley. They crack in the front corner. One broke today! So, has anyone replaced them with plastic like Plexiglass or lexan. The
Hello, So I have broken 3 replacement windows so far in 4 years on my Crosley. They crack in the front corner. One broke today! So, has anyone replaced them with plastic like Plexiglass or lexan. The
|
By frank
·
|
|
For sale 21 messages
We have part we would like to sell as a group if possible. Engine, transmission, radiator, gas tank and some more parts. Located near Decatur, AL. Contact Me Tom McCormick (205)635-8940
We have part we would like to sell as a group if possible. Engine, transmission, radiator, gas tank and some more parts. Located near Decatur, AL. Contact Me Tom McCormick (205)635-8940
|
By
tlmccormick_115@...
·
|
|
Interior Light assembly for 1949 Crosley SW 16 messages
I'm looking for the interior light assembly on the post behind the drivers door for my 1949 Crosely Station Wagon. Does anybody know where I can find one? Thanks for your help.
I'm looking for the interior light assembly on the post behind the drivers door for my 1949 Crosely Station Wagon. Does anybody know where I can find one? Thanks for your help.
|
By jdiamondh@...
·
|
|
saw this on ebay - FAGEOL NOS marine engine 5 messages
https://www.ebay.com/itm/264760580565 too far away for me :-(
https://www.ebay.com/itm/264760580565 too far away for me :-(
|
By Dave Shipman
·
|
|
West Coast Crosley Meeting Cancelled!
Another one hits the dust for 2020. Just got this from Rick Alexander, Dear West Coast Member, Regrettably, it is necessary to cancel the Annual Meeting which would have been held this October in Buel
Another one hits the dust for 2020. Just got this from Rick Alexander, Dear West Coast Member, Regrettably, it is necessary to cancel the Annual Meeting which would have been held this October in Buel
|
By Jim Bollman
·
|