Hi: I am in need to doors for my 1951 Super Sport (VC) as mine are rusted beyond repair. Will consider anything you may have!

Are there any aftermarket baby moon hubcaps that fit Crosley wheels?

Hi Jim, Have you, or anyone else, put a residual valve in line with the master cylinder output . It should really improve drum braking, regardless of the drum size.. Normally, we install 10 psi for dr

These are probably out of our price range not counting the shipping from France but Dan Strohl has written another nice article for Hemmings and goes into some details on the two Bandini's that are Cr

Hi Jim, Did you get your questions with a Magneto resolved. I had a problem with my Wico XVD-4 on my Devin. It had been sitting for a long time. I contacted a group here on the West Coast to help me g

Should any of the transmission internals have some wobble- a little bit on the shafts..? What bushings are there, look like a bronze type-with numerous holes and a groove for oil. I don't seem to find

I am working on a '47 Pickup with 6" mechanical brakes. The truck is finished and on the road. It will not stop safely. All components are new except the drums. The drums have been turned, but I used

Jim, I'm starting over on my '47 drums and linings. I use Porterfield here in Costa Mesa. They reline and radius the shoes. I noted that the old linings were only making contact on the inside of the s

I'm checking a crankshaft for a rebuild. I haven't gone over it with a micrometer, but a quick check with a caliper shows 1.350" on the Rod and Main journals and 1.500" on the Rear Main. Does anyone h

Looks like a pretty solid project, runs and stops, that's a good start. Could be just finished enough to be safe and the rest left alone or recondition as time and money allowed. Sill be interesting t

Mostly complete rolling 1948 chassis. Looks like someone made a yard buggy out of it with an old 1 cylinder engine. It does have a title but no serial number plate. "I have a rusted body frame of a 19

I have a broken wheel clip on one of the wheels on my 1947 Roundside. I have some extra clips but no rivets. Any suggestions as to where to find the rivet needed to attach the clip to the wheel? Bill

Wondering what the group experience is with rim selection. There does not seem to be any 12" rims available except for trailer rims. I have read these are unsafe on cars. Any info?

Very nicely redone Crofton Bug on BaT up for bids this week. It has an Aerojet engine and fancy wheels but otherwise looks very stock and well restored. https://bringatrailer.com/listing/1959-crofton-

Hey gang, I'm trying to find a replacement starter motor for my Crosley based H-mod race car. The ID tag says AUTO-LITE MDH 4002H on it. I have been told it was used on a Crofton. Thanks, Bob

I just finished my 1947 Pickup. The brakes are scary, should I be able to lock them up with full pressure. They will not. ..........Jim.

Another internet find regarding the sturdy Crosley motor and inferred Crosley relationship while not mentioning Mr Crosley.

Here is the March CotM. https://crosleyautoclub.com If you want your Crosley to be considered for a future CotM send me 2 pictures featuring different features/angles of your Crosley. Jim...

I've been going through my spare parts. Tore apart a stray T92 transmission. The cluster gear has chunks out of it. Not to mention its missing one of the bushings. The rest are just bad... Anyone have

I either missed it the first time around or forgot about it. Lou Ragani put together a YouTube video 10+ years ago, of some of the many Crosley appearances on TV and in Movies, check it out. https://w