Topics

Crosley Engine Block

w.tomlinson@...
 

Hello Crosley enthusiasts!

I joined this group to ask if there would be any interest in an engine block I found in the attic of my garage when I moved into my house. It's missing many parts, crank and cam, but the block is there, and I though somebody would have some use of it. Is there anybody interested, or know of somebody I can contact who may be? It's located in Edmonton, Alberta, Canada. 

David Reina
 

Hi,  

That block and crankcase is from what is called a tin block.  It was made by oven brazing sheetmetal around steel cylinder sleeves.

It was the original way the Crosley motor was produced.  It worked well when it was used for military items such as hydraulic pumps and generators but Crosley had trouble with the blocks when used in cars.  One problem was that due to the brazing process used for assembly of the block parts there was electrolysis which could lead to pin hole leaks through the cylinder walls.  Another problems in auto use were the braze joints leaking.  This could have been from a less stringent assembly technique then when they were produced for military use or the greater vibration of road use.

Eventually Crosley had to use cast iron blocks because of problems with the tin blocks.

I would be interested if its still available.

Regards,
Dave Reina

On Jan 28, 2018, at 3:20 PM, w.tomlinson@... wrote:

Hello Crosley enthusiasts!

I joined this group to ask if there would be any interest in an engine block I found in the attic of my garage when I moved into my house. It's missing many parts, crank and cam, but the block is there, and I though somebody would have some use of it. Is there anybody interested, or know of somebody I can contact who may be? It's located in Edmonton, Alberta, Canada. 

<IMG_0737.JPG><IMG_0736.JPG>

Gary
 

I have a complete COBRA motor that turns over and seems to have decent compression. Would you like it? It doesn’t have a flywheel or water pump or generator.

Gary McFarlane
Sent from my iPhone

On Jan 28, 2018, at 6:03 PM, David Reina via Groups.Io <reinadesigns@...> wrote:

Hi,  

That block and crankcase is from what is called a tin block.  It was made by oven brazing sheetmetal around steel cylinder sleeves.

It was the original way the Crosley motor was produced.  It worked well when it was used for military items such as hydraulic pumps and generators but Crosley had trouble with the blocks when used in cars.  One problem was that due to the brazing process used for assembly of the block parts there was electrolysis which could lead to pin hole leaks through the cylinder walls.  Another problems in auto use were the braze joints leaking.  This could have been from a less stringent assembly technique then when they were produced for military use or the greater vibration of road use.

Eventually Crosley had to use cast iron blocks because of problems with the tin blocks.

I would be interested if its still available.

Regards,
Dave Reina

On Jan 28, 2018, at 3:20 PM, w.tomlinson@... wrote:

Hello Crosley enthusiasts!

I joined this group to ask if there would be any interest in an engine block I found in the attic of my garage when I moved into my house. It's missing many parts, crank and cam, but the block is there, and I though somebody would have some use of it. Is there anybody interested, or know of somebody I can contact who may be? It's located in Edmonton, Alberta, Canada. 

<IMG_0737.JPG><IMG_0736.JPG>

w.tomlinson@...
 

No thank you gary, I'm not a Crosley man, I found this engine and want to find it a good home. However, I've been in touch with a chap David in New York, and he's looking to put together a COBRA motor, so I'll give you his email, and he might be interested in that as well!

Here is his email

reinadesigns@...


Regards,


Warren






From: Crosley-Gang@groups.io <Crosley-Gang@groups.io> on behalf of Gary <m1911bldr@...>
Sent: January 29, 2018 6:32 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] Crosley Engine Block
 
I have a complete COBRA motor that turns over and seems to have decent compression. Would you like it? It doesn’t have a flywheel or water pump or generator.

Gary McFarlane
Sent from my iPhone

On Jan 28, 2018, at 6:03 PM, David Reina via Groups.Io <reinadesigns@...> wrote:

Hi,  

That block and crankcase is from what is called a tin block.  It was made by oven brazing sheetmetal around steel cylinder sleeves.

It was the original way the Crosley motor was produced.  It worked well when it was used for military items such as hydraulic pumps and generators but Crosley had trouble with the blocks when used in cars.  One problem was that due to the brazing process used for assembly of the block parts there was electrolysis which could lead to pin hole leaks through the cylinder walls.  Another problems in auto use were the braze joints leaking.  This could have been from a less stringent assembly technique then when they were produced for military use or the greater vibration of road use.

Eventually Crosley had to use cast iron blocks because of problems with the tin blocks.

I would be interested if its still available.

Regards,
Dave Reina

On Jan 28, 2018, at 3:20 PM, w.tomlinson@... wrote:

Hello Crosley enthusiasts!

I joined this group to ask if there would be any interest in an engine block I found in the attic of my garage when I moved into my house. It's missing many parts, crank and cam, but the block is there, and I though somebody would have some use of it. Is there anybody interested, or know of somebody I can contact who may be? It's located in Edmonton, Alberta, Canada. 

<IMG_0737.JPG><IMG_0736.JPG>

seb fontana
 

WHERE ARE YOU LOCATED?

David
 
Edited

Hi Seb,

 

I’m in Escondido, CA.

 

David

 

Sent from Mail for Windows 10

 

From: seb fontana via Groups.Io
Sent: Tuesday, January 30, 2018 10:48 AM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] Crosley Engine Block

 

WHERE ARE YOU LOCATED?