Thank you Jim, I should be able to make it by tomorrow. Likely around 1:30-2:00 pm

Jim, if you have an extra set I am interested and frequently drive by Costa Mesa

Here is a link to the parts diagram from Olympic Gear Products. http://www.olympicgear.com/images/pops/partsV.gif

Hi Dave, where in Southern California are you? I too am in Southern California.

https://www.facebook.com/marketplace/item/455978442555588/?ref=search&referral_code=marketplace_search&referral_story_type=post&tracking=browse_serp%3A04c3c005-a11f-4875-9f96-77c992ea54f7 May be a bit

Understand completely. Other models are more readily available, and other than the body and reinforced frame are for the most part the same in terms of assembly methods. Either way, good luck!

Hi Greg, not sure if there is a specific reason your looking for a parts truck, but other models of that vintage should have the parts you may need. There are also many parts available from the vendor

Thanks Jim, I will likely take you up on that.

On Mon, Nov 22, 2021 at 12:03 PM James Dlapa via groups.io <crosley1980@...> wrote: Jim, if you decide a Vc housing will help you project I have attached some pics of one I would let g

Jim, if you decide a Vc housing will help you project I have attached some pics of one I would let go. I drive past Costa Mesa nearly every weekday.

Jim, not sure if you need a housing for a Vc or not, but I have an extra one. The ring and pinion are out of it. Not too far from you.

Thank you Tim, for the images . This is a great help.

Thank you Tim, would you take a close up of the clip on the hold down? I believe this is for the hood prop.

Thank you Jim/ Kenn.

It’s close to the original color, it’s Volvo 604 ( midnight blue) it was a close match to the chip I took to that paint store.

Dale for pre-war?

It very well could be, I’ve seen other prewars with that hold down in it. Mine is missing and want as close to original as possible. Here is a pic of the engine bay so far. Just put the body back on n

Thank you Tim, much appreciated.

Hey all, I am wondering if anyone might have an original battery hold down for a prewar they would be willing to take some pictures of with measurements. Any help would be greatly appreciated. Thank i

The contact should work the nut may not .