Date   
Re: Prewar era

Technical Design
 


Will do. Thank you for the lead.


On Fri, Jun 7, 2019 at 12:50 PM, crosleyshortsport
<crosleyshortsport@...> wrote:
Check with Ted at Yankee Crosley Parts.

On Fri, Jun 7, 2019, 1:46 PM James Dlapa <crosley1980@...> wrote:
Where are you located? 

On Fri, Jun 7, 2019 at 10:44 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Hello all,

I am working on my Crosley Roadster, which I am fabricating due to lack of sources for parts. I was wondering if anybody has dimensional information for all profiles of a pre-war era automobile? I'm actually looking for detail for a pre-war era pick up. Any assistance would be greatly appreciated. Thank you.

Sincerely,
Ken

Re: Prewar era

James Dlapa
 

Ken I have a complete truck bed that has some rust. I can take pictures and measurements of it that will help. It is missing the panel that goes behind the seats ( front of bed) but otherwise looks complete

On Fri, Jun 7, 2019 at 10:51 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:

Will do. Thank you for the lead.


On Fri, Jun 7, 2019 at 12:50 PM, crosleyshortsport
Check with Ted at Yankee Crosley Parts.

On Fri, Jun 7, 2019, 1:46 PM James Dlapa <crosley1980@...> wrote:
Where are you located? 

On Fri, Jun 7, 2019 at 10:44 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Hello all,

I am working on my Crosley Roadster, which I am fabricating due to lack of sources for parts. I was wondering if anybody has dimensional information for all profiles of a pre-war era automobile? I'm actually looking for detail for a pre-war era pick up. Any assistance would be greatly appreciated. Thank you.

Sincerely,
Ken

Re: Prewar era

Technical Design
 

Thank you James. If you could take pictures with a ruler along the side I can figure out the dimensions from there. I also want the width and profile of looking from the top down. Any detail would be appreciated and extremely helpful.

I would love a truck like that but I don't want to use something that could be restored for what I'm creating. I just need basic Dimensions because my Roadster is based on Crosley Axel's an overall profile.


On Fri, Jun 7, 2019 at 12:53 PM, James Dlapa
<crosley1980@...> wrote:
Ken I have a complete truck bed that has some rust. I can take pictures and measurements of it that will help. It is missing the panel that goes behind the seats ( front of bed) but otherwise looks complete

On Fri, Jun 7, 2019 at 10:51 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:

Will do. Thank you for the lead.


On Fri, Jun 7, 2019 at 12:50 PM, crosleyshortsport
Check with Ted at Yankee Crosley Parts.

On Fri, Jun 7, 2019, 1:46 PM James Dlapa <crosley1980@...> wrote:
Where are you located? 

On Fri, Jun 7, 2019 at 10:44 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Hello all,

I am working on my Crosley Roadster, which I am fabricating due to lack of sources for parts. I was wondering if anybody has dimensional information for all profiles of a pre-war era automobile? I'm actually looking for detail for a pre-war era pick up. Any assistance would be greatly appreciated. Thank you.

Sincerely,
Ken

Re: Prewar era

James Dlapa
 

Ok will take some pics this weekend. Seems easy enough to recreate

On Fri, Jun 7, 2019 at 10:58 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. If you could take pictures with a ruler along the side I can figure out the dimensions from there. I also want the width and profile of looking from the top down. Any detail would be appreciated and extremely helpful.

I would love a truck like that but I don't want to use something that could be restored for what I'm creating. I just need basic Dimensions because my Roadster is based on Crosley Axel's an overall profile.


On Fri, Jun 7, 2019 at 12:53 PM, James Dlapa
Ken I have a complete truck bed that has some rust. I can take pictures and measurements of it that will help. It is missing the panel that goes behind the seats ( front of bed) but otherwise looks complete

On Fri, Jun 7, 2019 at 10:51 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:

Will do. Thank you for the lead.


On Fri, Jun 7, 2019 at 12:50 PM, crosleyshortsport
Check with Ted at Yankee Crosley Parts.

On Fri, Jun 7, 2019, 1:46 PM James Dlapa <crosley1980@...> wrote:
Where are you located? 

On Fri, Jun 7, 2019 at 10:44 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Hello all,

I am working on my Crosley Roadster, which I am fabricating due to lack of sources for parts. I was wondering if anybody has dimensional information for all profiles of a pre-war era automobile? I'm actually looking for detail for a pre-war era pick up. Any assistance would be greatly appreciated. Thank you.

Sincerely,
Ken

Re: Prewar era

Technical Design
 

Thank you James. Truly appreciated.

The biggest challenge will be all the radiuses 4 cab corners, door panels, Etc. Good thing they don't need to be perfect for my street rod, haha.


On Fri, Jun 7, 2019 at 1:00 PM, James Dlapa
<crosley1980@...> wrote:
Ok will take some pics this weekend. Seems easy enough to recreate

On Fri, Jun 7, 2019 at 10:58 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. If you could take pictures with a ruler along the side I can figure out the dimensions from there. I also want the width and profile of looking from the top down. Any detail would be appreciated and extremely helpful.

I would love a truck like that but I don't want to use something that could be restored for what I'm creating. I just need basic Dimensions because my Roadster is based on Crosley Axel's an overall profile.


On Fri, Jun 7, 2019 at 12:53 PM, James Dlapa
Ken I have a complete truck bed that has some rust. I can take pictures and measurements of it that will help. It is missing the panel that goes behind the seats ( front of bed) but otherwise looks complete

On Fri, Jun 7, 2019 at 10:51 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:

Will do. Thank you for the lead.


On Fri, Jun 7, 2019 at 12:50 PM, crosleyshortsport
Check with Ted at Yankee Crosley Parts.

On Fri, Jun 7, 2019, 1:46 PM James Dlapa <crosley1980@...> wrote:
Where are you located? 

On Fri, Jun 7, 2019 at 10:44 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Hello all,

I am working on my Crosley Roadster, which I am fabricating due to lack of sources for parts. I was wondering if anybody has dimensional information for all profiles of a pre-war era automobile? I'm actually looking for detail for a pre-war era pick up. Any assistance would be greatly appreciated. Thank you.

Sincerely,
Ken

October 18-20, Small Wonder Micro and Mini Car Event, Dover Delaware

Michael Braun
 

I have just signed a contract to reserve a block of rooms here in Dover, DE for the 2019 Small Wonder Micro and Mini-Car event scheduled for the weekend of October 18th.   I priced pretty much all the suitable hotels in Dover, and some not so suitable, and was able to negotiate what I believe is an exceptional price at $105/night.  The hotel is the Holiday Inn, Downtown.  We will be getting Twin Double Bedded rooms, along with a blocked off area to park our cars.  The Hotel has plenty of other parking for tow vehicles and trailers. 

You can search “Holiday Inn Downtown Dover DE” or click on the link below to learn more about the Hotel.

https://www.ihg.com/holidayinn/hotels/us/en/dover/dover/hoteldetail?qDest=Dover,%20DE,%20United%20States&qCiD=8&qCoD=9&qCiMy=52019&qCoMy=52019&qAdlt=1&qChld=0&qRms=1&qWch=0&qSmP=1&qIta=99504425&glat=SEAR&setPMCookies=true&qRtP=6CBARC&qAkamaiCC=US&srb_u=1&qRad=30&qRdU=mi&presentationViewType=null&qSrt=sBR&qBrs=re.ic.in.vn.cp.vx.hi.ex.rs.cv.sb.cw.ma.ul.ki.va#_gl=1*1q2xfx6*_gcl_aw*R0NMLjE1NjAwMjgzNzA4NDkuRUFJYUlRb2JDaE1JeVpxVGx1YmE0Z0lWaFo2ZkNoM2NyUUlORUFBWUFpQUFFZ0s5LXZEX0J3RQ..

 

To get the discounted rate you will need to identify yourself as with the “Small Wonder Car Show”.  Our Block of rooms is being held until 09/18/2019, but I encourage you to reserve early.  Several hotels I contacted told me that the Weekend of October 18th is a busy one and room availability is limited.  At least two of the Hotels I talked to were already 100% booked.

If you register and your plans change you need to notify the Hotel 72 hours prior to arrival to cancel without penalty.  Check in is 3PM or later. If you need an earlier check in, tell the Hotel when you reserve your room and they will try and accommodate us.

I know this event is still months away, but I’d like to get an indication from those interested in attending.

Thanks

Mike Braun

 

 

Plug on the rear differential

James Hudson
 

Hello, I'm posting this question after searching the Crosley Service Manual and this forum without success. I'm trying to check the gear oil level in the differential on my 52 Wagon and find that the gas tank is so close to the differential that it's obscuring the plug. There's about an inch between the plug and the tank. Is there a special tool for this? (I can't fit my large Allen wrench . Do I cut down an existing tool? Am I supposed to drop the gas tank? Thank you for your help.
Jim Hudson

Re: Plug on the rear differential

Butch
 

No special tool, if you jack the car up a little, by the frame, not the rear axle, it should give you plenty of clearance to remove the plug.

Butch

On 6/9/2019 11:26 PM, James Hudson wrote:
Hello, I'm posting this question after searching the Crosley Service Manual and this forum without success. I'm trying to check the gear oil level in the differential on my 52 Wagon and find that the gas tank is so close to the differential that it's obscuring the plug. There's about an inch between the plug and the tank. Is there a special tool for this? (I can't fit my large Allen wrench . Do I cut down an existing tool? Am I supposed to drop the gas tank? Thank you for your help.
Jim Hudson
_._,_._,

Virus-free. www.avast.com

Re: Plug on the rear differential

crosleyshortsport
 

Butch, is, of course, correct on raising the car up, ao the gas tank is out of your way. I have always used my 1/2 " drive socket drive to pull the plug. When removed, stick your finger inside and the gear oil level should be just a hair under the lower side of the hole.


On Mon, Jun 10, 2019, 8:23 AM Butch via Groups.Io <butch46988=yahoo.com@groups.io> wrote:
No special tool, if you jack the car up a little, by the frame, not the rear axle, it should give you plenty of clearance to remove the plug.

Butch

On 6/9/2019 11:26 PM, James Hudson wrote:
Hello, I'm posting this question after searching the Crosley Service Manual and this forum without success. I'm trying to check the gear oil level in the differential on my 52 Wagon and find that the gas tank is so close to the differential that it's obscuring the plug. There's about an inch between the plug and the tank. Is there a special tool for this? (I can't fit my large Allen wrench . Do I cut down an existing tool? Am I supposed to drop the gas tank? Thank you for your help.
Jim Hudson
_._,_._,

Virus-free. www.avast.com

Re: Plug on the rear differential

James Hudson
 

Gentlemen, Thank you so much. I had it up on ramps and failed to consider the jack and jack stands right next to the car! Sorry to inconvenience you-Jim Hudson

Re: Prewar era

James Dlapa
 

Hi Ken, please pm me and I will send you some pics. 

On Fri, Jun 7, 2019 at 11:21 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. Truly appreciated.

The biggest challenge will be all the radiuses 4 cab corners, door panels, Etc. Good thing they don't need to be perfect for my street rod, haha.


On Fri, Jun 7, 2019 at 1:00 PM, James Dlapa
Ok will take some pics this weekend. Seems easy enough to recreate

On Fri, Jun 7, 2019 at 10:58 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. If you could take pictures with a ruler along the side I can figure out the dimensions from there. I also want the width and profile of looking from the top down. Any detail would be appreciated and extremely helpful.

I would love a truck like that but I don't want to use something that could be restored for what I'm creating. I just need basic Dimensions because my Roadster is based on Crosley Axel's an overall profile.


On Fri, Jun 7, 2019 at 12:53 PM, James Dlapa
Ken I have a complete truck bed that has some rust. I can take pictures and measurements of it that will help. It is missing the panel that goes behind the seats ( front of bed) but otherwise looks complete

On Fri, Jun 7, 2019 at 10:51 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:

Will do. Thank you for the lead.


On Fri, Jun 7, 2019 at 12:50 PM, crosleyshortsport
Check with Ted at Yankee Crosley Parts.

On Fri, Jun 7, 2019, 1:46 PM James Dlapa <crosley1980@...> wrote:
Where are you located? 

On Fri, Jun 7, 2019 at 10:44 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Hello all,

I am working on my Crosley Roadster, which I am fabricating due to lack of sources for parts. I was wondering if anybody has dimensional information for all profiles of a pre-war era automobile? I'm actually looking for detail for a pre-war era pick up. Any assistance would be greatly appreciated. Thank you.

Sincerely,
Ken

Re: Prewar era

Kenn Cahill
 

James, I would love to see the pictures of your prewar Crosley pick up  bed. I have a Crosley Prewar pick up which I hope to restore.  However I am not the Ken that initiated this thread.


On Jun 10, 2019, at 10:40 PM, James Dlapa <crosley1980@...> wrote:

Hi Ken, please pm me and I will send you some pics. 

On Fri, Jun 7, 2019 at 11:21 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. Truly appreciated.

The biggest challenge will be all the radiuses 4 cab corners, door panels, Etc. Good thing they don't need to be perfect for my street rod, haha.


On Fri, Jun 7, 2019 at 1:00 PM, James Dlapa
Ok will take some pics this weekend. Seems easy enough to recreate

On Fri, Jun 7, 2019 at 10:58 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. If you could take pictures with a ruler along the side I can figure out the dimensions from there. I also want the width and profile of looking from the top down. Any detail would be appreciated and extremely helpful.

I would love a truck like that but I don't want to use something that could be restored for what I'm creating. I just need basic Dimensions because my Roadster is based on Crosley Axel's an overall profile.


On Fri, Jun 7, 2019 at 12:53 PM, James Dlapa
Ken I have a complete truck bed that has some rust. I can take pictures and measurements of it that will help. It is missing the panel that goes behind the seats ( front of bed) but otherwise looks complete

On Fri, Jun 7, 2019 at 10:51 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:

Will do. Thank you for the lead.


On Fri, Jun 7, 2019 at 12:50 PM, crosleyshortsport
Check with Ted at Yankee Crosley Parts.

On Fri, Jun 7, 2019, 1:46 PM James Dlapa <crosley1980@...> wrote:
Where are you located? 

On Fri, Jun 7, 2019 at 10:44 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Hello all,

I am working on my Crosley Roadster, which I am fabricating due to lack of sources for parts. I was wondering if anybody has dimensional information for all profiles of a pre-war era automobile? I'm actually looking for detail for a pre-war era pick up. Any assistance would be greatly appreciated. Thank you.

Sincerely,
Ken

Re: Prewar era

James Dlapa
 

I

On Mon, Jun 10, 2019 at 8:06 PM Kenn Cahill <drkenncahill@...> wrote:
James, I would love to see the pictures of your prewar Crosley pick up  bed. I have a Crosley Prewar pick up which I hope to restore.  However I am not the Ken that initiated this thread.



On Jun 10, 2019, at 10:40 PM, James Dlapa <crosley1980@...> wrote:

Hi Ken, please pm me and I will send you some pics. 

On Fri, Jun 7, 2019 at 11:21 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. Truly appreciated.

The biggest challenge will be all the radiuses 4 cab corners, door panels, Etc. Good thing they don't need to be perfect for my street rod, haha.


On Fri, Jun 7, 2019 at 1:00 PM, James Dlapa
Ok will take some pics this weekend. Seems easy enough to recreate

On Fri, Jun 7, 2019 at 10:58 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. If you could take pictures with a ruler along the side I can figure out the dimensions from there. I also want the width and profile of looking from the top down. Any detail would be appreciated and extremely helpful.

I would love a truck like that but I don't want to use something that could be restored for what I'm creating. I just need basic Dimensions because my Roadster is based on Crosley Axel's an overall profile.


On Fri, Jun 7, 2019 at 12:53 PM, James Dlapa
Ken I have a complete truck bed that has some rust. I can take pictures and measurements of it that will help. It is missing the panel that goes behind the seats ( front of bed) but otherwise looks complete

On Fri, Jun 7, 2019 at 10:51 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:

Will do. Thank you for the lead.


On Fri, Jun 7, 2019 at 12:50 PM, crosleyshortsport
Check with Ted at Yankee Crosley Parts.

On Fri, Jun 7, 2019, 1:46 PM James Dlapa <crosley1980@...> wrote:
Where are you located? 

On Fri, Jun 7, 2019 at 10:44 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Hello all,

I am working on my Crosley Roadster, which I am fabricating due to lack of sources for parts. I was wondering if anybody has dimensional information for all profiles of a pre-war era automobile? I'm actually looking for detail for a pre-war era pick up. Any assistance would be greatly appreciated. Thank you.

Sincerely,
Ken

Re: Prewar era

James Dlapa
 

It’s a bit rough, but great for a template

On Mon, Jun 10, 2019 at 8:19 PM James Dlapa via Groups.Io <crosley1980=gmail.com@groups.io> wrote:
I

On Mon, Jun 10, 2019 at 8:06 PM Kenn Cahill <drkenncahill@...> wrote:
James, I would love to see the pictures of your prewar Crosley pick up  bed. I have a Crosley Prewar pick up which I hope to restore.  However I am not the Ken that initiated this thread.



On Jun 10, 2019, at 10:40 PM, James Dlapa <crosley1980@...> wrote:

Hi Ken, please pm me and I will send you some pics. 

On Fri, Jun 7, 2019 at 11:21 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. Truly appreciated.

The biggest challenge will be all the radiuses 4 cab corners, door panels, Etc. Good thing they don't need to be perfect for my street rod, haha.


On Fri, Jun 7, 2019 at 1:00 PM, James Dlapa
Ok will take some pics this weekend. Seems easy enough to recreate

On Fri, Jun 7, 2019 at 10:58 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. If you could take pictures with a ruler along the side I can figure out the dimensions from there. I also want the width and profile of looking from the top down. Any detail would be appreciated and extremely helpful.

I would love a truck like that but I don't want to use something that could be restored for what I'm creating. I just need basic Dimensions because my Roadster is based on Crosley Axel's an overall profile.


On Fri, Jun 7, 2019 at 12:53 PM, James Dlapa
Ken I have a complete truck bed that has some rust. I can take pictures and measurements of it that will help. It is missing the panel that goes behind the seats ( front of bed) but otherwise looks complete

On Fri, Jun 7, 2019 at 10:51 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:

Will do. Thank you for the lead.


On Fri, Jun 7, 2019 at 12:50 PM, crosleyshortsport
Check with Ted at Yankee Crosley Parts.

On Fri, Jun 7, 2019, 1:46 PM James Dlapa <crosley1980@...> wrote:
Where are you located? 

On Fri, Jun 7, 2019 at 10:44 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Hello all,

I am working on my Crosley Roadster, which I am fabricating due to lack of sources for parts. I was wondering if anybody has dimensional information for all profiles of a pre-war era automobile? I'm actually looking for detail for a pre-war era pick up. Any assistance would be greatly appreciated. Thank you.

Sincerely,
Ken

Attachments:

Re: Plug on the rear differential

Butch
 

Jim,

No inconvenience at all, we're Crosley people, we like to help, that's what we're here for, it gives us a purpose in life!

Butch

On 6/10/2019 9:40 PM, James Hudson wrote:
Gentlemen, Thank you so much. I had it up on ramps and failed to consider the jack and jack stands right next to the car! Sorry to inconvenience you-Jim Hudson
_._,_._,_

Virus-free. www.avast.com

Whalom Park 1951 Firetruck

Jim Bollman
 

Story about the Whalom Park Massachusetts 1951 Crosley Firetruck. It is for sale if anyone wants to add a very large Crosley to their collection.

https://www.msn.com/en-us/autos/classic-cars/who-remembers-this-whalom-park-1951-crosley-truck/ar-AACFxU2

Re: Whalom Park 1951 Firetruck

L.E. Hardee
 

I have a Crosley fire truck for sale for about half the price of that one, if anyone is interested.  Located in Eastern North Carolina.


On Tue, Jun 11, 2019 at 7:55 AM Jim Bollman <Jim@...> wrote:
Story about the Whalom Park Massachusetts 1951 Crosley Firetruck. It is for sale if anyone wants to add a very large Crosley to their collection.

https://www.msn.com/en-us/autos/classic-cars/who-remembers-this-whalom-park-1951-crosley-truck/ar-AACFxU2

Re: Prewar era

Technical Design
 

James,

Thank you. These pics will be very helpful. Maybe someday I can post my project on here. Not for the purists but more a dedication to my father. 

Thanks again,
Ken


On Mon, Jun 10, 2019 at 10:19 PM, James Dlapa
<crosley1980@...> wrote:
I

On Mon, Jun 10, 2019 at 8:06 PM Kenn Cahill <drkenncahill@...> wrote:
James, I would love to see the pictures of your prewar Crosley pick up  bed. I have a Crosley Prewar pick up which I hope to restore.  However I am not the Ken that initiated this thread.



On Jun 10, 2019, at 10:40 PM, James Dlapa <crosley1980@...> wrote:

Hi Ken, please pm me and I will send you some pics. 

On Fri, Jun 7, 2019 at 11:21 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. Truly appreciated.

The biggest challenge will be all the radiuses 4 cab corners, door panels, Etc. Good thing they don't need to be perfect for my street rod, haha.


On Fri, Jun 7, 2019 at 1:00 PM, James Dlapa
Ok will take some pics this weekend. Seems easy enough to recreate

On Fri, Jun 7, 2019 at 10:58 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Thank you James. If you could take pictures with a ruler along the side I can figure out the dimensions from there. I also want the width and profile of looking from the top down. Any detail would be appreciated and extremely helpful.

I would love a truck like that but I don't want to use something that could be restored for what I'm creating. I just need basic Dimensions because my Roadster is based on Crosley Axel's an overall profile.


On Fri, Jun 7, 2019 at 12:53 PM, James Dlapa
Ken I have a complete truck bed that has some rust. I can take pictures and measurements of it that will help. It is missing the panel that goes behind the seats ( front of bed) but otherwise looks complete

On Fri, Jun 7, 2019 at 10:51 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:

Will do. Thank you for the lead.


On Fri, Jun 7, 2019 at 12:50 PM, crosleyshortsport
Check with Ted at Yankee Crosley Parts.

On Fri, Jun 7, 2019, 1:46 PM James Dlapa <crosley1980@...> wrote:
Where are you located? 

On Fri, Jun 7, 2019 at 10:44 AM Technical Design via Groups.Io <technical.design=yahoo.com@groups.io> wrote:
Hello all,

I am working on my Crosley Roadster, which I am fabricating due to lack of sources for parts. I was wondering if anybody has dimensional information for all profiles of a pre-war era automobile? I'm actually looking for detail for a pre-war era pick up. Any assistance would be greatly appreciated. Thank you.

Sincerely,
Ken

Roger (Bill) Dickenson Crosleys and more

fred@...
 

The Roger Dickenson collection goes up for auction in zimmerman Minnesota July 20 - see details here: http://www.vanderbrinkauctions.com/catalog/?auction=5244

Re: Roger (Bill) Dickenson Crosleys and more

crosleyshortsport
 

I bet Mike Wolfe will be at that auction !  A few nice Crosleys available, hope to see them at the nationals someday .


On Wed, Jun 12, 2019, 9:47 AM <fred@...> wrote:
The Roger Dickenson collection goes up for auction in zimmerman Minnesota July 20 - see details here: http://www.vanderbrinkauctions.com/catalog/?auction=5244