Date   
Re: Wanted: Info on Crosley Tractor

SteveC
 

My father built one of those in the mid-60's. Very much like that one. I wonder if Popular Mechanics published a plan?  Anyway, I don't think that's the one he built unless you know it came from the northern Connecticut, southern Mass region at some point. I have pictures of my father's Crosley tractor but it will take me a little while to dig them up...

Re: West coast crosley meet

Mike Mayberry
 

James,
Do you still have any pics of the cars up in dagger that Rhonda wants to sell? I cannot find any and dont want to waste a trip up there.



Sent from my T-Mobile 4G LTE Device

-------- Original message --------
From: James Dlapa <crosley1980@...>
Date: 3/14/19 6:08 PM (GMT-08:00)
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] West coast crosley meet

Hi Mike, look forward to seeing you there. 

On Thu, Mar 14, 2019 at 5:30 PM Mike Mayberry <mikemayberry75@...> wrote:
I will be at the west coast meet in perris this may 11th. I was hoping to purchase a back seat or two from someone. If anyone needs some parts let me know I will search my inventory and bring it to the show.

 Mike mayberry
951-852-5536

Quarterly Arrived today - Spring Arrives Tomorrow

Steve
 

Good looking Quarterly!

 

Re: Quarterly Arrived today - Spring Arrives Tomorrow

 

Sent in Membership App a month ago and havent heard if I passed. Any update would be appreciated.

Re: Quarterly Arrived today - Spring Arrives Tomorrow

Saltsgaver, Mike
 

My membership card arrived pretty quickly.  I think I joined in January.

Mike S



Hella Electronics Corporation, 43811 Plymouth Oaks Blvd., 48170, Plymouth Michigan
-----------------------------------------------------------------------------------------
This document is to be treated confidentially. Its contents are not to be passed on, duplicated, exploited or disclosed without our express permission. All rights reserved, especially the right to apply for protective rights.

3D Printing Radio Knobs????

Plandersen
 
Edited

Has anyone tried 3D printing radio switches.  I can’t find any and wondered if that would work.  Ken

Hella Electronics Corporation, 43811 Plymouth Oaks Blvd., 48170, Plymouth Michigan 
-----------------------------------------------------------------------------------------
This document is to be treated confidentially. Its contents are not to be passed on, duplicated, exploited or disclosed without our express permission. All rights reserved, especially the right to apply for protective rights.

Quarterly Arrived today - Spring Arrives Tomorrow

Mike S
 

My magazine arrived yesterday.

Re: 3D Printing Radio Knobs????

Jim Bollman
 

Please start a new Topic when you start talking about something new. Hard to find things when they are labeled wrong. I moved this to a new thread with a better title.

Moderator
Jim...

Re: 3D Printing Radio Knobs????

Plandersen
 

OK but not sure how to do it but I will try.  I think I need to join and get a membership.  Kent

On Mar 20, 2019, at 8:23 AM, Jim Bollman <Jim@...> wrote:

Please start a new Topic when you start talking about something new. Hard to find things when they are labeled wrong. I moved this to a new thread with a better title.

Moderator
Jim...

Re: 3D Printing Radio Knobs????

Mike S
 
Edited

Were there more designs than these 2?  Which was more common?  Is the shaft the knobs go onto "D" shaped or do they have the slot for a metal strip in the back of the knob?  Were the original knobs die cast or plastic?
Mike S

Re: 3D Printing Radio Knobs????

Plandersen
 

I actually have an extra radio but not the knobs.  Mine has the red plastic knobs.  Kent

On Mar 20, 2019, at 8:45 AM, Mike S <miso7@...> wrote:

Were there more designs than these 2?  Which was more common?  Is the shaft the knobs go onto "D" shaped or do they have the slot for a metal strip in the back of the knob?
Mike S <Knob one.JPG><Knob philco.JPG>

Re: 3D Printing Radio Knobs????

Jim Bollman
 

The red ones were reproduced back in the 80s in small quantities by making a mold from a good original and pouring plastic of some sort into the molds. I had a set of them and they were very nice. Person that did them died about 20 years ago, not sure where the molds went.

Jim...

On Mar 20, 2019, at 11:45 AM, Mike S <miso7@...> wrote:

[Edited Message Follows]

Were there more designs than these 2?  Which was more common?  Is the shaft the knobs go onto "D" shaped or do they have the slot for a metal strip in the back of the knob?  Were the original knobs die cast or plastic?
Mike S <Knob one.JPG><Knob philco.JPG>

Re: 3D Printing Radio Knobs????

Barry Smedley
 

The red ones are for the chrome nose Motorola the other one is for the philco I think.

 

Barry Smedley

 

From: Crosley-Gang@groups.io [mailto:Crosley-Gang@groups.io] On Behalf Of Plandersen
Sent: Wednesday, March 20, 2019 12:27 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] 3D Printing Radio Knobs????

 

I actually have an extra radio but not the knobs.  Mine has the red plastic knobs.  Kent



On Mar 20, 2019, at 8:45 AM, Mike S <miso7@...> wrote:

 

Were there more designs than these 2?  Which was more common?  Is the shaft the knobs go onto "D" shaped or do they have the slot for a metal strip in the back of the knob?
Mike S <Knob one.JPG><Knob philco.JPG>

 

This message contains confidential information intended solely for the use of the addressee(s) named above. Any review, disclosure, distribution, copying or use of the information by others is strictly prohibited. If you have received this message in error, please advise the sender by immediate reply and delete the original message. (English) Ce message contient des informations confidentielles destinées uniquement à l'usage du(des) destinataire(s) nommé(s) ci-dessus. Toute consultation, distribution, copie et utilisation du contenu de ce message est strictement prohibée. Si vous avez reçu ce message par erreur, SVP avisez l'expéditeur par réponse immédiate et effacez le message original. (French)

Re: 3D Printing Radio Knobs????

Plandersen
 

Yes both mine have the Motorola chrome nose.  Kent

Kent Andersen, YVIAA District Director
PO Box 364
Royal City, WA  99357

Phone 509-346-1500
Fax 509-346-1540
Cell 509-760-5881
Email pkandersen@...





On Mar 20, 2019, at 9:36 AM, Barry Smedley <BSmedley@...> wrote:

The red ones are for the chrome nose Motorola the other one is for the philco I think.
 
Barry Smedley
 
From: Crosley-Gang@groups.io [mailto:Crosley-Gang@groups.io] On Behalf Of Plandersen
Sent: Wednesday, March 20, 2019 12:27 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] 3D Printing Radio Knobs????
 
I actually have an extra radio but not the knobs.  Mine has the red plastic knobs.  Kent


On Mar 20, 2019, at 8:45 AM, Mike S <miso7@...> wrote:
 
Were there more designs than these 2?  Which was more common?  Is the shaft the knobs go onto "D" shaped or do they have the slot for a metal strip in the back of the knob?
Mike S <Knob one.JPG><Knob philco.JPG>
 

This message contains confidential information intended solely for the use of the addressee(s) named above. Any review, disclosure, distribution, copying or use of the information by others is strictly prohibited. If you have received this message in error, please advise the sender by immediate reply and delete the original message. (English) Ce message contient des informations confidentielles destinées uniquement à l'usage du(des) destinataire(s) nommé(s) ci-dessus. Toute consultation, distribution, copie et utilisation du contenu de ce message est strictement prohibée. Si vous avez reçu ce message par erreur, SVP avisez l'expéditeur par réponse immédiate et effacez le message original. (French)

Re: West coast crosley meet

James Dlapa
 

Hi Mike, I do but am out of town and without a computer. I should be back late next week

On Tue, Mar 19, 2019 at 11:18 AM Mike Mayberry <mikemayberry75@...> wrote:
James,
Do you still have any pics of the cars up in dagger that Rhonda wants to sell? I cannot find any and dont want to waste a trip up there.



Sent from my T-Mobile 4G LTE Device

-------- Original message --------
From: James Dlapa <crosley1980@...>
Date: 3/14/19 6:08 PM (GMT-08:00)
Subject: Re: [Crosley-Gang] West coast crosley meet

Hi Mike, look forward to seeing you there. 

On Thu, Mar 14, 2019 at 5:30 PM Mike Mayberry <mikemayberry75@...> wrote:
I will be at the west coast meet in perris this may 11th. I was hoping to purchase a back seat or two from someone. If anyone needs some parts let me know I will search my inventory and bring it to the show.

 Mike mayberry
951-852-5536

Re: Quarterly Arrived today - Spring Arrives Tomorrow

crosleyshortsport
 

Jim Murphy,  You should have received a membership packet within 30 days. To be sure your check and form was received, email the Crosley club membership chairman, Duane at


On Wed, Mar 20, 2019, 11:04 AM Mike S <miso7@...> wrote:
My magazine arrived yesterday.

Tower Shaft upper bolt removal tool

 

What tool do you use to remove the upper bolt on the tower shaft? I have a couple of sockets with the studs but nothing as tiny as the grooves in the shaft housing. Thank you.

Re: Tower Shaft upper bolt removal tool

Butch
 

The upper tower shaft bolt should just have a 7/16" head (maybe 1/2", I'm not close to one at present), no special tool or socket required.

Butch

On 3/21/2019 11:38 AM, Jim Murphy wrote:
What tool do you use to remove the upper bolt on the tower shaft? I have a couple of sockets with the studs but nothing as tiny as the grooves in the shaft housing. Thank you.


Virus-free. www.avast.com

Re: Tower Shaft upper bolt removal tool

Plandersen
 

Some require a 12 point socket.  That would explain the tiny groves.  Kent

On Mar 21, 2019, at 9:03 AM, Butch via Groups.Io <butch46988@...> wrote:

The upper tower shaft bolt should just have a 7/16" head (maybe 1/2", I'm not close to one at present), no special tool or socket required.

Butch

On 3/21/2019 11:38 AM, Jim Murphy wrote:
What tool do you use to remove the upper bolt on the tower shaft? I have a couple of sockets with the studs but nothing as tiny as the grooves in the shaft housing. Thank you.


Virus-free. www.avast.com

Re: Tower Shaft upper bolt removal tool

dale@servicemotors.net
 

Should be just a 7/16 wrench..  


On Mar 21, 2019, at 8:38 AM, Jim Murphy <lftrn97@...> wrote:

What tool do you use to remove the upper bolt on the tower shaft? I have a couple of sockets with the studs but nothing as tiny as the grooves in the shaft housing. Thank you.