Date   
Re: Crosley collection for sale

ROBERT L GREGG <capngrog@...>
 

Do they all have valid titles?


On Wednesday, October 17, 2018 1:26 PM, wakeboardman750 via Groups.Io <wakeboardman750@...> wrote:


with the passing of my father in-law who collected Conley’s am looking to sell them to some one who would appreciate them as he did. 
They are Dagget , Ca 
https://photos.app.goo.gl/yrScu8UX2bVDZRs78


Re: Crosley collection for sale

James Dlapa
 

Hello, would love to come and take a look. It’s about a 2 hour drive from me. A weekend would work best. My email is below
Thank you, James

On Wed, Oct 17, 2018 at 10:26 AM wakeboardman750 via Groups.Io <wakeboardman750=yahoo.com@groups.io> wrote:
with the passing of my father in-law who collected Conley’s am looking to sell them to some one who would appreciate them as he did. 
They are Dagget , Ca 
https://photos.app.goo.gl/yrScu8UX2bVDZRs78

Re: Crosley collection for sale

Mike Mayberry
 

I would love to see them as well!!!

Re: Crosley collection for sale

wakeboardman750@...
 

My sister in-law at rondaltremblay@... 
Please contact her for a date and time to meet with her as she lives two hours from the ranch in Daggett to view cars. 

Re: Crosley collection for sale

James Dlapa
 

Hello, this email comes back as rejected. Is there another one to use? Or a potential typo?

On Wed, Oct 17, 2018 at 11:37 AM wakeboardman750 via Groups.Io <wakeboardman750=yahoo.com@groups.io> wrote:
My sister in-law at rondaltremblay@... 
Please contact her for a date and time to meet with her as she lives two hours from the ranch in Daggett to view cars. 

Re: Crosley collection for sale

wakeboardman750@...
 

It appears this site will not allow full email addresses.
rondarltremblay@  aol.com
lets see if this works

Re: Crosley collection for sale

Jim Bollman
 

I usually code them like rondarltremblay "AT" aol.com

As moderator I get the full email.

Jim...

On Oct 17, 2018, at 3:23 PM, wakeboardman750 via Groups.Io <wakeboardman750=yahoo.com@groups.io> wrote:

It appears this site will not allow full email addresses.
rondarltremblay@ aol.com
lets see if this works

Re: Crosley collection for sale

Joe Brownsberger
 

Do you have a title for a 1948 station wagon? I am in need of a title but not the car. I'd hate to cut this 48 wagon I have into unrecognizable pieces and scrap it.


On Wed, Oct 17, 2018, 3:28 PM Jim Bollman <Jim@...> wrote:
I usually code them like rondarltremblay "AT" aol.com

As moderator I get the full email.

Jim...

> On Oct 17, 2018, at 3:23 PM, wakeboardman750 via Groups.Io <wakeboardman750=yahoo.com@groups.io> wrote:
>
> It appears this site will not allow full email addresses.
> rondarltremblay@  aol.com
> lets see if this works
>




Re: Congrats to Jeff Gladden

Jeffrey Gladden
 

Thanks for letting me know Jim; I did not know any results.  

It turned out to be a nice show after the rain stopped at about 0930.


On Oct 16, 2018, at 10:28 AM, jane altman <bchjanead@...> wrote:

Awesome!  Way to bring Crosslet into the radar...

Re: Crosley collection for sale

Jeremy Rutherford
 

I am in need of some good sheetmetal, if you by chance have a wagon or pickup that is too far gone and willing to part out.  I need a good tailgate and then corners of the bed/wagon 
image1.jpeg

On Oct 17, 2018, at 5:48 PM, Joe Brownsberger <jbraunsberg@...> wrote:

Do you have a title for a 1948 station wagon? I am in need of a title but not the car. I'd hate to cut this 48 wagon I have into unrecognizable pieces and scrap it.

On Wed, Oct 17, 2018, 3:28 PM Jim Bollman <Jim@...> wrote:
I usually code them like rondarltremblay "AT" aol.com

As moderator I get the full email.

Jim...

> On Oct 17, 2018, at 3:23 PM, wakeboardman750 via Groups.Io <wakeboardman750=yahoo.com@groups.io> wrote:
>
> It appears this site will not allow full email addresses.
> rondarltremblay@  aol.com
> lets see if this works
>




Changing wiring harness

Ron D.
 

As I was working on my 49 Sedan restoration yesterday, I came to a sad conclusion. When I was pulling out the torn cardboard radiator sides, I found several of the wires were dry rotted and the insulation was cracking off. I did more checking, and found several other spots where this was happening. Well, it makes sense to go big, and change the whole wiring harness, to avoid future wiring problems. My question is, who have you used as a new harness supplier, and were you happy with it? There are several listed in the Crosley parts suppliers listing. Did anyone have problems with a particular suppliers harness? Did it come with correct terminals?  I see prices vary from about $500 to about $700. 

Ron

Re: Changing wiring harness

Barry Smedley
 

If you are not worried about being original they are quite easy to wire your self and a lot cheaper. I have a couple of the repo wiring kits in two of my Crosley’s, they are very good quality. Not trying to run business away from are great vendors, Just thought I would throw in my 2 cents.

 

    Barry Smedley

 

From: Crosley-Gang@groups.io [mailto:Crosley-Gang@groups.io] On Behalf Of Ron Dole
Sent: Thursday, October 18, 2018 8:32 AM
To: Crosley-Gang@groups.io
Subject: [Crosley-Gang] Changing wiring harness

 

As I was working on my 49 Sedan restoration yesterday, I came to a sad conclusion. When I was pulling out the torn cardboard radiator sides, I found several of the wires were dry rotted and the insulation was cracking off. I did more checking, and found several other spots where this was happening. Well, it makes sense to go big, and change the whole wiring harness, to avoid future wiring problems. My question is, who have you used as a new harness supplier, and were you happy with it? There are several listed in the Crosley parts suppliers listing. Did anyone have problems with a particular suppliers harness? Did it come with correct terminals?  I see prices vary from about $500 to about $700. 

Ron

This message contains confidential information intended solely for the use of the addressee(s) named above. Any review, disclosure, distribution, copying or use of the information by others is strictly prohibited. If you have received this message in error, please advise the sender by immediate reply and delete the original message. (English) Ce message contient des informations confidentielles destinées uniquement à l'usage du(des) destinataire(s) nommé(s) ci-dessus. Toute consultation, distribution, copie et utilisation du contenu de ce message est strictement prohibée. Si vous avez reçu ce message par erreur, SVP avisez l'expéditeur par réponse immédiate et effacez le message original. (French)

Re: Changing wiring harness

dale@servicemotors.net
 

Hi ron 
Service motors does have the wiring harness for your car in stock and they do have all the correct ends and are just like the originals.  You may find others a bit less expensive but remember one thing, you get what you pay for especially when it come to wiring.
Dale


On Oct 18, 2018, at 5:32 AM, Ron Dole <rdole417@...> wrote:

As I was working on my 49 Sedan restoration yesterday, I came to a sad conclusion. When I was pulling out the torn cardboard radiator sides, I found several of the wires were dry rotted and the insulation was cracking off. I did more checking, and found several other spots where this was happening. Well, it makes sense to go big, and change the whole wiring harness, to avoid future wiring problems. My question is, who have you used as a new harness supplier, and were you happy with it? There are several listed in the Crosley parts suppliers listing. Did anyone have problems with a particular suppliers harness? Did it come with correct terminals?  I see prices vary from about $500 to about $700. 

Ron

Re: Changing wiring harness

Spock Arnold
 

My problems usually with the installer not the harness.  Seriously I have used harnesses from Both Service Motors and Yankee along with Harnesses unlimited and had no problem.

On Oct 18, 2018 8:32 AM, Ron Dole <rdole417@...> wrote:
As I was working on my 49 Sedan restoration yesterday, I came to a sad conclusion. When I was pulling out the torn cardboard radiator sides, I found several of the wires were dry rotted and the insulation was cracking off. I did more checking, and found several other spots where this was happening. Well, it makes sense to go big, and change the whole wiring harness, to avoid future wiring problems. My question is, who have you used as a new harness supplier, and were you happy with it? There are several listed in the Crosley parts suppliers listing. Did anyone have problems with a particular suppliers harness? Did it come with correct terminals?  I see prices vary from about $500 to about $700. 

Ron

Re: Changing wiring harness

crosleyshortsport
 

The harness I installed a few months ago in my '48 wagon came from Yankee Crosley Parts. I actually only looked at the numbers on the wires and the corresponding paper that came with it a few times. Every wire matched exactly as it should and was an easy install. My '48 had both tail lights, so I added the signals, and had ordered the harness with that in mind. It all works great ! It also looks very original. Wherever you decide to get it, I suggest the pre-made to order option over making your own.
Jeffrey

On Thu, Oct 18, 2018, 10:02 AM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
My problems usually with the installer not the harness.  Seriously I have used harnesses from Both Service Motors and Yankee along with Harnesses unlimited and had no problem.

On Oct 18, 2018 8:32 AM, Ron Dole <rdole417@...> wrote:
As I was working on my 49 Sedan restoration yesterday, I came to a sad conclusion. When I was pulling out the torn cardboard radiator sides, I found several of the wires were dry rotted and the insulation was cracking off. I did more checking, and found several other spots where this was happening. Well, it makes sense to go big, and change the whole wiring harness, to avoid future wiring problems. My question is, who have you used as a new harness supplier, and were you happy with it? There are several listed in the Crosley parts suppliers listing. Did anyone have problems with a particular suppliers harness? Did it come with correct terminals?  I see prices vary from about $500 to about $700. 

Ron

Re: Changing wiring harness

Richard Williams
 

It is easy to remove the old one by just cutting it out but the new wiring is some what of a problem to get back in place. The harness I got for Service Motors at $550 has the correct connections and then you just have to follow the wiring schematic. Takes time but worth it. Be patient. Good luck. 


On Thursday, October 18, 2018 5:32 AM, Ron Dole <rdole417@...> wrote:


As I was working on my 49 Sedan restoration yesterday, I came to a sad conclusion. When I was pulling out the torn cardboard radiator sides, I found several of the wires were dry rotted and the insulation was cracking off. I did more checking, and found several other spots where this was happening. Well, it makes sense to go big, and change the whole wiring harness, to avoid future wiring problems. My question is, who have you used as a new harness supplier, and were you happy with it? There are several listed in the Crosley parts suppliers listing. Did anyone have problems with a particular suppliers harness? Did it come with correct terminals?  I see prices vary from about $500 to about $700. 

Ron


Re: Crosley collection for sale

Brian Dlapa
 

I have title and tag for 48 wagon ibought at nationals I could part with

On ‎Wednesday‎, ‎October‎ ‎17‎, ‎2018‎ ‎08‎:‎02‎:‎50‎ ‎PM‎ ‎CDT, Jeremy Rutherford <jruthe2@...> wrote:


I am in need of some good sheetmetal, if you by chance have a wagon or pickup that is too far gone and willing to part out.  I need a good tailgate and then corners of the bed/wagon 
image1.jpeg

On Oct 17, 2018, at 5:48 PM, Joe Brownsberger <jbraunsberg@...> wrote:

Do you have a title for a 1948 station wagon? I am in need of a title but not the car. I'd hate to cut this 48 wagon I have into unrecognizable pieces and scrap it.

On Wed, Oct 17, 2018, 3:28 PM Jim Bollman <Jim@...> wrote:
I usually code them like rondarltremblay "AT" aol.com

As moderator I get the full email.

Jim...

> On Oct 17, 2018, at 3:23 PM, wakeboardman750 via Groups.Io <wakeboardman750=yahoo.com@groups.io> wrote:
>
> It appears this site will not allow full email addresses.
> rondarltremblay@  aol.com
> lets see if this works
>




48 title

Joe Brownsberger
 

Hi Brian, this is Joe. I am the one looking for a 1948 station wagon title and ID tag. How much are you looking to get for the title?


On Thu, Oct 18, 2018, 10:57 AM Brian Dlapa via Groups.Io <treestumpbvd=yahoo.com@groups.io> wrote:
I have title and tag for 48 wagon ibought at nationals I could part with

On ‎Wednesday‎, ‎October‎ ‎17‎, ‎2018‎ ‎08‎:‎02‎:‎50‎ ‎PM‎ ‎CDT, Jeremy Rutherford <jruthe2@...> wrote:


I am in need of some good sheetmetal, if you by chance have a wagon or pickup that is too far gone and willing to part out.  I need a good tailgate and then corners of the bed/wagon 


On Oct 17, 2018, at 5:48 PM, Joe Brownsberger <jbraunsberg@...> wrote:

Do you have a title for a 1948 station wagon? I am in need of a title but not the car. I'd hate to cut this 48 wagon I have into unrecognizable pieces and scrap it.

On Wed, Oct 17, 2018, 3:28 PM Jim Bollman <Jim@...> wrote:
I usually code them like rondarltremblay "AT" aol.com

As moderator I get the full email.

Jim...

> On Oct 17, 2018, at 3:23 PM, wakeboardman750 via Groups.Io <wakeboardman750=yahoo.com@groups.io> wrote:
>
> It appears this site will not allow full email addresses.
> rondarltremblay@  aol.com
> lets see if this works
>




Re: 48 title

Mike Mayberry
 

I need a title as well if someone has one!!!

Re: 48 title

James Dlapa
 

Mike, in California you can have the vin verified and obtain one through a title company

On Thu, Oct 18, 2018 at 10:50 AM Mike Mayberry <mikemayberry75@...> wrote:
I need a title as well if someone has one!!!