Date   
Re: Engine/ water pump cover wanted

jane altman
 

Dave Edwards... Has a daytime job and one of the nicest guys I've ever dealt with
(419) 589-5767

Re: Engine/ water pump cover wanted

Gary
 

Which pump- 4 or 6 bolt? I have one of each- 

Gary McFarlane

On Jul 19, 2018, at 12:27 PM, Joe Brownsberger <jbraunsberg@...> wrote:

Hi, does any one have a water pump cover available for sale, I only need the cover. Attached is have pictures of two cast iron blocks I'm trying to figure out what these holes are for. The oily looking block has a brass fitting stuck in it and the dry block just has an open hole.
<20180718_232620.jpg>
<20180718_232547.jpg>

Re: Third set of 2018 Photos Uploaded

crosleyshortsport
 

You took some nice shots Jim !


On Thu, Jul 19, 2018, 10:50 PM Jim Bollman <Jim@...> wrote:
Here is Fridays photos
http://crosleyautoclub.com/18Nationals/2-Friday/index.html

As before tell me of any errors or omissions, like the last two messages saying 2019 photos.

Jim...

Re: NooB from Ohio

Ron D.
 

$12,000, and it doesn't even have a radio. Looks like that dealer is looking for that sucker who was just born.
P.S. , .......Don't be him.

Re: NooB from Ohio

paul
 

Folks,  I live in Dayton, knew this Crosley existed but never ventured to see it. we can't put it all on the dealer, he may have been sold a bill of goods too. we don't know how much Crosley he knows. who actually did the work? was it finished when he bought it? did he get it partially done and get in over his head doing or having the final work done? upgrading the doors to roll up windows wasn't an accident, that and probably changing to hydraulic brakes took someone knowledgeable about Crosleys. the pictures say it's a pretty car, the seats say comfortable, the propeller is a neat touch, two tone wheels are striking. it's still an overpriced, overdone, fun driver to play with and most viewers on a Saturday evening would never know the difference. maybe the dealer is hunting a sucker or maybe he got suckered himself and needs 12K just to get out from under it.  thank goodness Chris had the insight to ask, we have begun to educate him, but the dealer is getting lessons too. I was born this month but not just this morning,,,,   Paul Rinehart

On 7/20/2018 7:30 AM, Ron Dole wrote:
$12,000, and it doesn't even have a radio. Looks like that dealer is looking for that sucker who was just born.
P.S. , .......Don't be him.

Re: Still waiting

Robert Kirk
 

The picture attached to the dealer offering of a car attracted my attention via the front bumper over riders and grille guard.  I've got a 51 wagon with something quite similar and thought it was a marriage.  I'm thinking now possibly an aftermarket or dealer option for Crosley.  Anyone else encounter something like this?

Re: Still waiting

Spock Arnold
 

I've seen this type numerous times.  It is an aftermarket piece for small cars

Re: Still waiting

James Dlapa
 

I have a set or two of over-riders like that that I have removed from a couple Crosley,s over the past few years, but have not given much thought about their origin. Interestingly they were both cc’s . It’s a great question you bring up. Perhaps just a mail order or dealer add on? 

On Fri, Jul 20, 2018 at 12:16 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
I've seen this type numerous times.  It is an aftermarket piece for small cars

Re: Still waiting

crosleyshortsport
 

This is my '48 wagon, I am almost finished with the restoration. I found the grill guard a couple years ago in the dirt. Had it rechromed for this car. I have only seen a few of them on Crosleys over the years.


On Fri, Jul 20, 2018, 3:16 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
I've seen this type numerous times.  It is an aftermarket piece for small cars

Re: Still waiting

Barry Smedley
 

I have one just like that

 

   Barry Smedley

 

From: Crosley-Gang@groups.io [mailto:Crosley-Gang@groups.io] On Behalf Of crosleyshortsport
Sent: Friday, July 20, 2018 3:28 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] Still waiting

 

This is my '48 wagon, I am almost finished with the restoration. I found the grill guard a couple years ago in the dirt. Had it rechromed for this car. I have only seen a few of them on Crosleys over the years.

 

On Fri, Jul 20, 2018, 3:16 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:

I've seen this type numerous times.  It is an aftermarket piece for small cars

Attachments:

This message contains confidential information intended solely for the use of the addressee(s) named above. Any review, disclosure, distribution, copying or use of the information by others is strictly prohibited. If you have received this message in error, please advise the sender by immediate reply and delete the original message. (English) Ce message contient des informations confidentielles destinées uniquement à l'usage du(des) destinataire(s) nommé(s) ci-dessus. Toute consultation, distribution, copie et utilisation du contenu de ce message est strictement prohibée. Si vous avez reçu ce message par erreur, SVP avisez l'expéditeur par réponse immédiate et effacez le message original. (French)

Re: Still waiting

Plandersen
 

Want to sell a set?  Kent

On Jul 20, 2018, at 12:27 PM, James Dlapa <crosley1980@...> wrote:

I have a set or two of over-riders like that that I have removed from a couple Crosley,s over the past few years, but have not given much thought about their origin. Interestingly they were both cc’s . It’s a great question you bring up. Perhaps just a mail order or dealer add on? 

On Fri, Jul 20, 2018 at 12:16 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
I've seen this type numerous times.  It is an aftermarket piece for small cars



Re: Still waiting

James Dlapa
 

I would yes, I will dig them out this weeekend and take some pics. They would need to be rechormed.   


On Fri, Jul 20, 2018 at 1:51 PM Plandersen <pkandersen@...> wrote:
Want to sell a set?  Kent


On Jul 20, 2018, at 12:27 PM, James Dlapa <crosley1980@...> wrote:

I have a set or two of over-riders like that that I have removed from a couple Crosley,s over the past few years, but have not given much thought about their origin. Interestingly they were both cc’s . It’s a great question you bring up. Perhaps just a mail order or dealer add on? 

On Fri, Jul 20, 2018 at 12:16 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
I've seen this type numerous times.  It is an aftermarket piece for small cars



Re: Engine/ water pump cover wanted

Plandersen
 

I have covers if you need one.  No charge.  Kent

Kent Andersen, YVIAA District Director
PO Box 364
Royal City, WA  99357

Phone 509-346-1500
Fax 509-346-1540
Cell 509-760-5881
Email pkandersen@...





On Jul 19, 2018, at 12:58 PM, Joe Brownsberger <jbraunsberg@...> wrote:

Thanks for the help guys, and the water pump cover I need is a 6 bolt pattern.

On Thu, Jul 19, 2018, 2:48 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
Which water pump?

On Jul 19, 2018 1:27 PM, Joe Brownsberger <jbraunsberg@...> wrote:
Hi, does any one have a water pump cover available for sale, I only need the cover. Attached is have pictures of two cast iron blocks I'm trying to figure out what these holes are for. The oily looking block has a brass fitting stuck in it and the dry block just has an open hole.




Adjusting bolts on 6&1/2 inch clutch , clutch slips, could this be the problem ?

Tim Hamblen
 

I took the Aerojet out of my 48 and put it in my 49. I did nothing to the clutch other than a new throwout bearing. Now in the 49 the clutch slips badly, never done that before . A look see shows the adjusting bolts on the pressure plate tight up against the throwout bearing. A comparison of the old and new bearing the best I can with the new in the car) and it appears that maybe the new bearing is a tad thicker than the  than the old bearing. Could it be so simple as just running the finger adjusting bolts in some ? In other words it seems the bolts are not allowing the pressure plate to fully engage.

Re: overpriced '47 Crosley

Terrance Robinson
 

I heard from and old Kaiser Frazer club member that titles are easy to get in Alabama--may be worth looking into--Terry

On Thu, Jul 19, 2018 at 11:33 AM, paul <bikertrash@...> wrote:
OMG!!   another one in Ohio.  Chris, one day I will tell you the story about getting the year designation corrected on a Crosley title in Ohio.  I just looked and this "47" car is sporting a late 1946 VIN.  another no biggie consideration but if one is anal (me) and wants to run proper year of manufacture license plates he has red tape to fight.  hey, you asked for an education, we are just being accommodating....ain't cha glad ya wrote?  for 12 grand we will set you up with his and hers.. did I say Mom gets the sedan or wagon and Dad gets the Hot Shot, convertible, or pickup?  is my selfish, sexist side showing again?  oops.;-)   Paul

On 7/19/2018 10:20 AM, Greetings wrote:
Thank you everyone!  I am passing on this one for sure but my hunt begins.  Here is a link to the ad for the car in question: http://gcc.dealeraccelerate.net/vehicles/43/1947-crosley-coupe




--
Hurt not the Earth neither the Sea. Nor the Trees.                         Revelation 7:3  
"A people that values its privileges above its principles soon loses both."   
                                                                            President Dwight D. Eisenhower 
"The only thing to buy on credit is your casket."                       James A Michener
Debt is "anything that you pay today for yesterday's living"              Ruth Hayden
A model of Christian Charity: "We are all responsible (institutions and individuals)    to each other and to serve the common good"              Gov. John Winthrop 1630

Fourth and Final Photos Have Been Uploaded

Jim Bollman
 

Saturdays Meet pictures have been uploaded for your pleasure

Please report errors omissions and bad links.

http://crosleyautoclub.com/18Nationals/3-Saturday/index.html

Jim...

Re: Still waiting 3 bar front over rider kit

Robert Kirk
 

That 3 bar set is exactly  what I got on my 51 CD,  Until seeing the the first 2 bar post, I just thought it was a junk yard add on.  Thanks for all the responses! 

One Last Web Update

Jim Bollman
 

I have update the directors and officers page to reflect the 2 new directors and new local liaison to the Fairgrounds.
http://crosleyautoclub.com/Officers/index.html

Now I need to get some none Crosley Club work done. :-)

Jim...

Re: Adjusting bolts on 6&1/2 inch clutch , clutch slips, could this be the problem ?

L.E. Hardee
 

Rather than messing with the finger bolts, why not just adjust the clutch linkage until you have about 1" of free clutch pedal movement before the throwout bearing engages the pressure plate.  I only adjust the finger bolts to get all three to engage evenly.



On Sat, Jul 21, 2018 at 9:15 AM, Tim Hamblen via Groups.Io <flinttim@...> wrote:
I took the Aerojet out of my 48 and put it in my 49. I did nothing to the clutch other than a new throwout bearing. Now in the 49 the clutch slips badly, never done that before . A look see shows the adjusting bolts on the pressure plate tight up against the throwout bearing. A comparison of the old and new bearing the best I can with the new in the car) and it appears that maybe the new bearing is a tad thicker than the  than the old bearing. Could it be so simple as just running the finger adjusting bolts in some ? In other words it seems the bolts are not allowing the pressure plate to fully engage.


Re: One Last Web Update

Gabriel Haddad
 

Great job Jim. Well done!


On Sat, Jul 21, 2018, 2:02 PM Jim Bollman <Jim@...> wrote:
I have update the directors and officers page to reflect the 2 new directors and new local liaison to the Fairgrounds.
http://crosleyautoclub.com/Officers/index.html

Now I need to get some none Crosley Club work done. :-)

Jim...