Date   
Re: CD windshield install

crosleyshortsport
 

Is the rubber new, or has it been around for a while ?  I tried to put my windshield in with a rubber from 10 years ago. I quickly realized that the glass was NOT going in. I purchased a "fresh" one from Dave Edwards Crosley parts, and I was able to easily install the glass on my own, mostly with soapy water and just my hands. Only needed a blunt bent tool at the lower corners. Here is s photo of my finished project for inspiration.


On Fri, Apr 5, 2019, 5:41 PM Jim Bollman <Jim@...> wrote:
Here is a method that was posted back in 2013.

--------------------------------------------------------------------
"Peter Berard" <berard_m@...>07/08/13   #27940

   Tony,
   I use a method my dad taught me in the 40s, when flat windshields were the norm.
  First, get son tough spall string, I got the nylon kind typically used to snap a chock line.
put the rubber over the windshield glass and place the string in the dish washing soap lubricated outside grove. Slide the rubber onto the bottom body flange and force it tight to the outside flange. with someone holding the glass tightly outward to the outside flange. Pull the string from inside the car gently while shoehorning a bit with a bent screwdriver. Work slowly, and you might have to try this several times till ya get the hang of it.

  Now, I found the present day rubbers to be quite fat so a lot of coursing will be needed.

   Of course the size of the glass is critical, but I had mine cut using the old glass for a pattern, so I have to blame the rubbers. I'd have made  the glass a eighth inch smaller in width and height if I'd known this, but I still got em in.
  Hope this helps...............p
--------------------------------------------------------------------

I have not tried it, so use at your own risk.

Jim...

> On Apr 5, 2019, at 4:42 PM, Sandy Smith via Groups.Io <tarmaciron=yahoo.com@groups.io> wrote:
>
> Can anyone provide instruction, tips or tricks on installing windshield glass in a 51 CD.
> Fighting with this ! Without success
> Thanks
>
> Sandy Smith
>
>
>




Micro Car Show for a Cause

Michael Braun
 

DO YOU LIKE MICROCARS?
THEN SAVE THE DATE
OCTOBER 18, 19 & 20
STAY TUNED FOR MORE INFO

Re: Temp sensor help needed

Jim Bollman
 

I really need to read what I reference. Jeff was the poster but not the original author, Steve Eggert Sr, was, sorry Steve. But since the VP of the club posted it I will accept that as approved for reprinting.

Jim...

Re: CD windshield install

Jim Bollman
 

Here is a method that was posted back in 2013.

--------------------------------------------------------------------
"Peter Berard" <berard_m@...>07/08/13 #27940

Tony,
I use a method my dad taught me in the 40s, when flat windshields were the norm.
First, get son tough spall string, I got the nylon kind typically used to snap a chock line.
put the rubber over the windshield glass and place the string in the dish washing soap lubricated outside grove. Slide the rubber onto the bottom body flange and force it tight to the outside flange. with someone holding the glass tightly outward to the outside flange. Pull the string from inside the car gently while shoehorning a bit with a bent screwdriver. Work slowly, and you might have to try this several times till ya get the hang of it.

Now, I found the present day rubbers to be quite fat so a lot of coursing will be needed.

Of course the size of the glass is critical, but I had mine cut using the old glass for a pattern, so I have to blame the rubbers. I'd have made the glass a eighth inch smaller in width and height if I'd known this, but I still got em in.
Hope this helps...............p
--------------------------------------------------------------------

I have not tried it, so use at your own risk.

Jim...

On Apr 5, 2019, at 4:42 PM, Sandy Smith via Groups.Io <tarmaciron=yahoo.com@groups.io> wrote:

Can anyone provide instruction, tips or tricks on installing windshield glass in a 51 CD.
Fighting with this ! Without success
Thanks

Sandy Smith


Re: CD windshield install

Tim Hamblen
 

You'll need a "glass paddle". Any glass company will have one. You lip in the two halves individually and then lip in the division rubber last. It would be nice to have a glass suction cup but likely you don't.Take some bar soap in a can or bowl, add a touch of water and stir it up with a paint brush till it foams, brush the foam on the inside of the rubber channel.

CD windshield install

Sandy Smith
 

Can anyone provide instruction, tips or tricks on installing windshield glass in a 51 CD.
Fighting with this ! Without success
Thanks

Sandy Smith

Re: CROSLEY TITLE

dale@servicemotors.net
 

You can see them on our website.  

On Apr 5, 2019, at 7:21 AM, dalef62 <kimndale97@...> wrote:

Do you have pictures of the tanks?
Dale

Re: Selling my 48 wagon $6500

Mike S
 

Tim, I sent you a note.  Will discuss with the wife tonight.

Re: CROSLEY TITLE

dalef62
 

Do you have pictures of the tanks?
Dale

Re: Selling my 48 wagon $6500

Tim Hamblen
 

I cannot answer that Mike. It was painted when I got it.From what I could see the rockers are solid, the front fenders viewed  from inside showed no repairs.  Those are always the bad parts. The floor tubs are original and solid but the floor areas around them have been made new with sheet metal. All in all I believe it to be a solid car. Paint is just old and cracking in places.

Re: Selling my 48 wagon $6500

Mike S
 

Tim,
What is the body work like underneath that beautiful red paint?  Can you tell how much work (if any) was done?
Mike S 

Selling my 48 wagon $6500

Tim Hamblen
 

I have decided to sell my 1948 CC Wagon. I don't need two station wagons and I just finished my 49 and am running out of room. I know for a fact I put no miles on it last year and only 20 miles the year before. That's the problem of having 6 of them, none get driven enough.The car has new interior, new tires, new clutch disc, rebuilt pressure plate, rebuilt carb,new exhaust,new battery etc etc etc. The paint job is old and came with the car when I got it, but is presentable for a driver.$6500 is the price. I am in Southern Indiana my email is flinttim at yahoo .com  There are pics of it on page 6 of the CC Photos here on this site plus these pics

Re: CROSLEY TITLE

Gary Bryant
 

$125 obo top fill..

-----Original Message-----
From: Crosley-Gang@groups.io [mailto:Crosley-Gang@groups.io] On Behalf Of Troy Helton
Sent: Friday, April 05, 2019 6:04 AM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] CROSLEY TITLE

How much are you asking for the gas tanks? Thanks

On 4/4/19, ray tooley via Groups.Io <ray.tooley=yahoo.com@groups.io> wrote:
Price please

Is anyone interested in a 1947 Crosley car title ?  car was parted out
years ago  I also have a couple of gas tanks



**We have moved locations – our new address is 7695 E. 21st St.
Indianapolis, IN 46219. Please make appropriate changes for shipping
and
billing**


Gary Bryant

PROJECT MANAGER

Exterior Building Products

7695 East 21st ST.

Indianapolis,IN 46219

(317) 894-5300 - Office

(317) 894-6666 – Fax

https://url.emailprotection.link/?b-2oZcWvpK2IUrLmljztGOSbD0R3b-QktnCy
BdyuHn6ENgAF4742olzIgGFqU-E6jmisTZrinKYnYTss94gvjZg~~


















Re: CROSLEY TITLE

Troy Helton
 

How much are you asking for the gas tanks? Thanks

On 4/4/19, ray tooley via Groups.Io <ray.tooley=yahoo.com@groups.io> wrote:
Price please

Is anyone interested in a 1947 Crosley car title ?  car was parted out years
ago  I also have a couple of gas tanks



**We have moved locations – our new address is 7695 E. 21st St.
Indianapolis, IN 46219. Please make appropriate changes for shipping and
billing**


Gary Bryant

PROJECT MANAGER

Exterior Building Products

7695 East 21st ST.

Indianapolis,IN 46219

(317) 894-5300 - Office

(317) 894-6666 – Fax

www.EXTBP.com


















Re: CROSLEY TITLE

Gary Bryant
 

$325 or best offer for title and $125 for tanks each obo these are top fill

 

From: Crosley-Gang@groups.io [mailto:Crosley-Gang@groups.io] On Behalf Of ray tooley via Groups.Io
Sent: Thursday, April 04, 2019 10:36 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] CROSLEY TITLE

 

Price please

 

On Thu, Apr 4, 2019 at 9:19 AM, Gary Bryant

<garybryant@...> wrote:

Is anyone interested in a 1947 Crosley car title ?  car was parted out years ago  I also have a couple of gas tanks

 

**We have moved locations – our new address is 7695 E. 21st St. Indianapolis, IN 46219. Please make appropriate changes for shipping and billing**

 

 

 

 

Gary Bryant

PROJECT MANAGER

Exterior Building Products

7695 East 21st ST.

Indianapolis,IN 46219

(317) 894-5300 - Office

(317) 894-6666 – Fax

www.EXTBP.com

 

 

 

Join Us on Facebook!

 

 

Re: CROSLEY TITLE

ray tooley
 

Price please


On Thu, Apr 4, 2019 at 9:19 AM, Gary Bryant
<garybryant@...> wrote:

Is anyone interested in a 1947 Crosley car title ?  car was parted out years ago  I also have a couple of gas tanks

 

**We have moved locations – our new address is 7695 E. 21st St. Indianapolis, IN 46219. Please make appropriate changes for shipping and billing**

 

 

 

 

Gary Bryant

PROJECT MANAGER

Exterior Building Products

7695 East 21st ST.

Indianapolis,IN 46219

(317) 894-5300 - Office

(317) 894-6666 – Fax

www.EXTBP.com

 

 

 

Join Us on Facebook!

 

 

Re: Temp sensor help needed

Jim Bollman
 

The club sponsors this website as a free resource. The Quarterly is copyrighted and is part of how the brick and mortar club exists. I know one article would not make a difference one way or another but it can be a slippery slope. 

Jim...

On Apr 4, 2019, at 7:11 PM, Mike S <miso7@...> wrote:

Not that it matters to me, but the magazine regularly publishes tech tips from the crosley websites.  Why would doing the opposite not be appropriate?
Mike S

Re: Temp sensor help needed

Mike S
 

Not that it matters to me, but the magazine regularly publishes tech tips from the crosley websites.  Why would doing the opposite not be appropriate?
Mike S

Re: Temp sensor help needed

Jim Bollman
 

Sorry I misremembered back issues are $5/ea.

Re: Temp sensor help needed

Jim Bollman
 

Two things, not really appropriate to post articles from past Quarterlies on the net. Black issues are available from our club store for $4/ issue.  If some one wants to mail a copy to Mike that is fine. The second thing, that isn't the article for putting modern guts in a stock garage, Jef Ackerman wrote that story. I think fairly recently. If no one posts it soon I will dig back through back issues and see if I can find it.

Jim...

On Apr 4, 2019, at 4:01 PM, Saltsgaver, Mike <Mike.Saltsgaver@...> wrote:

Could someone scan & post that article to the website for us “newbies” who weren’t members in 2015?


Hella Electronics Corporation, 43811 Plymouth Oaks Blvd., 48170, Plymouth Michigan 
-----------------------------------------------------------------------------------------
This document is to be treated confidentially. Its contents are not to be passed on, duplicated, exploited or disclosed without our express permission. All rights reserved, especially the right to apply for protective rights.