Date   

Re: Looking for a carb

Hellbs
 

Do you happen to have contact information for either of these gentlemen?  I dont think we will be able to attend nationals.


Re: Looking for a carb

Spock Arnold
 

I would guess your friend does not know about the Tillitson carb for the Crosley.  It is likely that the transverse tube has already been bent.   I would suggest you contact one of the Crosley vendors to see if they will rebuild it correctly.  But before you do, if I am not mistaken, this is not the correct carb for the pre war engine anyway.  Id suggest contacting Al Calvin to see if he has any.  Your best bet is to come to the National show to look for one.  Barry Seel may also be able to help.  
In addition Id suggest you make contact with your closest Club member to see if he or she can help you.  

On Tuesday, June 25, 2019, 05:47:33 PM PDT, Hellbs <hollywoodhellberg@...> wrote:


Hello all,
After posting last time inquiring about a carburetor rebuild kit for our '39 coupe convertible, we have run into other problems.  I had a friend who does a lot of work on carbs for jet-skis take a look at it and had some problems.  He got is partially apart and cleaned it really well.  Had lots of soot and other buildup from gas decades ago.  He said he could only separate the carb about an inch and something was catching internally and was afraid if he tried to hard to separate it, something would break and be un-repairable.  We also have a very old book with about 6 pages all about Crosley maintenance.  We were attempting to adjust the set adjustment screws as the manual states but they are seized up as well.  In his past experiences, breaking those loose also causes future fuel leaks.  Long story short, the engine runs fine anything above idle, if we let the RPMs drop to idle speed, it dies.  Thought that a good cleaning would help clear this problem up and run better but it didn't.  He believe there is something else in the carb not working properly. 

So with his recommendation, I am here looking for another carb in good working order, or another carb to use for parts to fix this one if we break something when trying to fully separate the carb.  Attached is a picture of the carb currently on the car.

If anyone can help please respond to this post with contact information and myself or my dad will get in touch.  My grandpa (who is now gone) bought the car new and we really wanted to get it drive-able before he past but ran out of time.  So we would really like to get it up and going before we loose to much more time so my dad, his siblings, and rest of our family can enjoy this fun little car.

Thank you very much in advance!
 -Matt H.


Re: Looking for a carb

Richard Helm
 

From the picture this looks like the Tillotson DY9C. If so, you need to remove the idle tube from the carburetor before trying to take it apart. I think that’s the screw with a spring under it that shows up in the upper right corner of your picture. That idle tube goes thru the carb on an angle and you will ruin it if you try to get the carb apart without removing the tube first. If you find the tube to be damaged you can get a new one from one of our Crosley vendors.

Rich


Re: Looking for a carb

Hellbs
 

forgot to add the picture...


Looking for a carb

Hellbs
 

Hello all,
After posting last time inquiring about a carburetor rebuild kit for our '39 coupe convertible, we have run into other problems.  I had a friend who does a lot of work on carbs for jet-skis take a look at it and had some problems.  He got is partially apart and cleaned it really well.  Had lots of soot and other buildup from gas decades ago.  He said he could only separate the carb about an inch and something was catching internally and was afraid if he tried to hard to separate it, something would break and be un-repairable.  We also have a very old book with about 6 pages all about Crosley maintenance.  We were attempting to adjust the set adjustment screws as the manual states but they are seized up as well.  In his past experiences, breaking those loose also causes future fuel leaks.  Long story short, the engine runs fine anything above idle, if we let the RPMs drop to idle speed, it dies.  Thought that a good cleaning would help clear this problem up and run better but it didn't.  He believe there is something else in the carb not working properly. 

So with his recommendation, I am here looking for another carb in good working order, or another carb to use for parts to fix this one if we break something when trying to fully separate the carb.  Attached is a picture of the carb currently on the car.

If anyone can help please respond to this post with contact information and myself or my dad will get in touch.  My grandpa (who is now gone) bought the car new and we really wanted to get it drive-able before he past but ran out of time.  So we would really like to get it up and going before we loose to much more time so my dad, his siblings, and rest of our family can enjoy this fun little car.

Thank you very much in advance!
 -Matt H.


Re: 12v conversion with alternator

L.E. Hardee
 

I, for one, would like to see a picture of your alternator set up.  Do you know what the alternator originally came off of? 


On Tue, Jun 25, 2019 at 6:51 PM Andy Farley <farleya1@...> wrote:
I figured out how to make it work. I took a piece of heavy heater hose and attached one end to the water pump. I split the other end, inserted a 7/16 socket and mounted that end to the 7/16 head bolt that comes out of the back end of the alternator shaft. I put a hose clamp around the section of hose where I inserted the socket. This holds the socket in place on the 7/16 bolt. It's solid yet flexible and drives the water pump perfectly without any leaks. Yahoo, going to Mel's Diner in Auburn CA for cruise night tomorrow night. 


Re: 12v conversion with alternator

Andy Farley
 

I figured out how to make it work. I took a piece of heavy heater hose and attached one end to the water pump. I split the other end, inserted a 7/16 socket and mounted that end to the 7/16 head bolt that comes out of the back end of the alternator shaft. I put a hose clamp around the section of hose where I inserted the socket. This holds the socket in place on the 7/16 bolt. It's solid yet flexible and drives the water pump perfectly without any leaks. Yahoo, going to Mel's Diner in Auburn CA for cruise night tomorrow night. 


Re: Tires ?

Spock Arnold
 

Yes bring them . There is a demand for original matched sets in good condition.  If you want to you can sell them in the trading post!

On Jun 25, 2019 7:07 AM, "Ron D." <rdole417@...> wrote:
Spock, I threw 5 regular and 2 snow tires on my tire pile, My 49 sedan that I inherited from my dad had what may not be the original, but that period tires on it. With tubes, the 4 mounted tires held air.  There was also 2 unmounted snows in the back. I bought 5 new radials for it, so I threw the old ones on the tire pile, never thinking that anyone would have a use for them. I am coming to Wauseon, so if someone is interested in these, send me a message.
Ron


Re: Tires ?

Spock Arnold
 

Well it is hard to find nice 450s and they are really useful to me for showing.  

On Jun 25, 2019 7:07 AM, "Ron D." <rdole417@...> wrote:
Spock, I threw 5 regular and 2 snow tires on my tire pile, My 49 sedan that I inherited from my dad had what may not be the original, but that period tires on it. With tubes, the 4 mounted tires held air.  There was also 2 unmounted snows in the back. I bought 5 new radials for it, so I threw the old ones on the tire pile, never thinking that anyone would have a use for them. I am coming to Wauseon, so if someone is interested in these, send me a message.
Ron


Re: Tires ?

Mike S
 

The old spare I pulled off (I have my own tire changing machine I bought out of a gas station that was being converted to a "convenience store") has a bad cut on the side wall, but I think it would still hold air and not be noticeable when mounted on the car as a spare.  I'll bring it along to Wauseon instead of throwing it away.  

Regarding the others, it would be nice to have 2 more original type tires, but I'm not really a concours kind of a guy.  I guess we'll see.  


Re: Tires ?

Ron D.
 

Spock, I threw 5 regular and 2 snow tires on my tire pile, My 49 sedan that I inherited from my dad had what may not be the original, but that period tires on it. With tubes, the 4 mounted tires held air.  There was also 2 unmounted snows in the back. I bought 5 new radials for it, so I threw the old ones on the tire pile, never thinking that anyone would have a use for them. I am coming to Wauseon, so if someone is interested in these, send me a message.
Ron


Re: Tires ?

Spock Arnold
 


Mike, Tony Smith offers a variety of types and qualities. You can select from them.  They are at best 480 x 12.  The 450btire is made but tough to find and expensive.   Please keep your old originals as they have valut to those of us that do concours class restorations and need them.  They are not safe to drive on but are for show.   I for one would buy good originals to show with

On Jun 24, 2019 11:39 PM, Mike S <miso7@...> wrote:
Our '48 wagon came with 2 sets of tires.....One set of 480 x 12 trailer tires on trailer rims....and one set of what appears to be original 4.5 x 12 tires.  The pair on the front must be reproductions of the Goodyear super cushions, as they have virtually no miles on them,...... but the rubber looks old like they were old NOS tires (no sign of age cracking).  The 2 tires on the back are originals, but are nearly worn out.  

I see a vendor who advertises in the Quarterly offers tires.  What types does he have?  I've sent an email to them to inquire.  The spare tire is an old original (also a goodyear) but is no good.  I need to put a new tire on it & want to know what the options are.
Mike S


Tires ?

Mike S
 

Our '48 wagon came with 2 sets of tires.....One set of 480 x 12 trailer tires on trailer rims....and one set of what appears to be original 4.5 x 12 tires.  The pair on the front must be reproductions of the Goodyear super cushions, as they have virtually no miles on them,...... but the rubber looks old like they were old NOS tires (no sign of age cracking).  The 2 tires on the back are originals, but are nearly worn out.  

I see a vendor who advertises in the Quarterly offers tires.  What types does he have?  I've sent an email to them to inquire.  The spare tire is an old original (also a goodyear) but is no good.  I need to put a new tire on it & want to know what the options are.
Mike S


Re: Clutch adjustments?

Plandersen
 

I would like one but will not be going. I live in Washington State. I’ll obviously pay for shipping plus handling. I have an extra radio if some one needs one. I doesn’t work but the tubes light up. Also I don’t have the knobs. Looks pretty good however. Motorola type. 509-760-5881. Kent Andersen


On Jun 23, 2019, at 18:18, Mike S <miso7@...> wrote:

Fred, mark me down for one!  


Re: Clutch adjustments?

Mike S
 

Fred, mark me down for one!  


Re: Windshield wiper: going to show that can install?

James Hudson
 

Hi Jane, I'm just a Crosley newbie myself but I had inoperable windshield wipers that once I had moving again (soaking a few days in ATF as advised on this forum) wouldn't wipe correctly. It turns out that I had re-installed them on the wrong sides! (The tubes for the vacuum hoses are supposed to point out towards the sides of the car). I hope you have a simple fix like I did. Sorry I won't get the chance to see your car at Wauseon, I can't make it this year-Jim


Re: Clutch adjustments?

fred@...
 

I will bring some flywheel shields to Wauseon 


Re: Windshield wiper: going to show that can install?

Jim Bollman
 

To get you to the Nationals, and hopefully some help in fixing your wipers, try RainX on your windshield. I have used it for years on my cars with weak or broke wiper motors. Most rain just beads off as you drive and I have been in some pretty big downpours.

On Jun 23, 2019, at 8:39 AM, jane altman <bchjanead@...> wrote:

Hi, My crosley is finally road ready and I'm thinking of driving it to the show from SW Pa.  My biggest incentive to get it there is that I haven't found anyone around her to install my words so that they actually work correctly.  The motors were rebuilt, but the wipers aren't wiping correctly.
Anyone going to the show that can correct thus issue?  


Re: Windshield wiper: going to show that can install?

Spock Arnold
 

Jane
      Bring it to the National show in Ohio.  We will find someone to look at the problem.  
Dave Anspach 

On Jun 23, 2019 8:39 AM, jane altman <bchjanead@...> wrote:
Hi, My crosley is finally road ready and I'm thinking of driving it to the show from SW Pa.  My biggest incentive to get it there is that I haven't found anyone around her to install my words so that they actually work correctly.  The motors were rebuilt, but the wipers aren't wiping correctly.
Anyone going to the show that can correct thus issue?  


Re: Pedal location on Super Sport

PATRICIA GRITTI
 

The transmission cover should only be held to the floor by a few screws. The cover in my VC is original. it is 11" front to back. Should be an easy task to remove the transmission cover & verify the tin is right. From your picture your gas pedal is not correct. The repo pedal you can buy is several inches front to back. that would allow you to work the gas without your foot interfering with the brake.
Don

On June 23, 2019 at 6:56 AM "Ron D." <rdole417@...> wrote:

It looks like when someone fabbed a new tunnel, they didn't take into account for the closeness of the pedals. I would climb underneath the car, and verify how far away the tunnel is to any moving parts, then take a hammer, and gently 'reform" the tunnel away from the gas pedal area, giving your foot more room to the right.. Your rubber floor mats should hide this pretty good.