Date   
Re: Still waiting

James Dlapa
 

I would yes, I will dig them out this weeekend and take some pics. They would need to be rechormed.   


On Fri, Jul 20, 2018 at 1:51 PM Plandersen <pkandersen@...> wrote:
Want to sell a set?  Kent


On Jul 20, 2018, at 12:27 PM, James Dlapa <crosley1980@...> wrote:

I have a set or two of over-riders like that that I have removed from a couple Crosley,s over the past few years, but have not given much thought about their origin. Interestingly they were both cc’s . It’s a great question you bring up. Perhaps just a mail order or dealer add on? 

On Fri, Jul 20, 2018 at 12:16 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
I've seen this type numerous times.  It is an aftermarket piece for small cars



Re: Still waiting

Plandersen
 

Want to sell a set?  Kent

On Jul 20, 2018, at 12:27 PM, James Dlapa <crosley1980@...> wrote:

I have a set or two of over-riders like that that I have removed from a couple Crosley,s over the past few years, but have not given much thought about their origin. Interestingly they were both cc’s . It’s a great question you bring up. Perhaps just a mail order or dealer add on? 

On Fri, Jul 20, 2018 at 12:16 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
I've seen this type numerous times.  It is an aftermarket piece for small cars



Re: Still waiting

Barry Smedley
 

I have one just like that

 

   Barry Smedley

 

From: Crosley-Gang@groups.io [mailto:Crosley-Gang@groups.io] On Behalf Of crosleyshortsport
Sent: Friday, July 20, 2018 3:28 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] Still waiting

 

This is my '48 wagon, I am almost finished with the restoration. I found the grill guard a couple years ago in the dirt. Had it rechromed for this car. I have only seen a few of them on Crosleys over the years.

 

On Fri, Jul 20, 2018, 3:16 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:

I've seen this type numerous times.  It is an aftermarket piece for small cars

Attachments:

This message contains confidential information intended solely for the use of the addressee(s) named above. Any review, disclosure, distribution, copying or use of the information by others is strictly prohibited. If you have received this message in error, please advise the sender by immediate reply and delete the original message. (English) Ce message contient des informations confidentielles destinées uniquement à l'usage du(des) destinataire(s) nommé(s) ci-dessus. Toute consultation, distribution, copie et utilisation du contenu de ce message est strictement prohibée. Si vous avez reçu ce message par erreur, SVP avisez l'expéditeur par réponse immédiate et effacez le message original. (French)

Re: Still waiting

crosleyshortsport
 

This is my '48 wagon, I am almost finished with the restoration. I found the grill guard a couple years ago in the dirt. Had it rechromed for this car. I have only seen a few of them on Crosleys over the years.


On Fri, Jul 20, 2018, 3:16 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
I've seen this type numerous times.  It is an aftermarket piece for small cars

Re: Still waiting

James Dlapa
 

I have a set or two of over-riders like that that I have removed from a couple Crosley,s over the past few years, but have not given much thought about their origin. Interestingly they were both cc’s . It’s a great question you bring up. Perhaps just a mail order or dealer add on? 

On Fri, Jul 20, 2018 at 12:16 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
I've seen this type numerous times.  It is an aftermarket piece for small cars

Re: Still waiting

Spock Arnold
 

I've seen this type numerous times.  It is an aftermarket piece for small cars

Re: Still waiting

Robert Kirk
 

The picture attached to the dealer offering of a car attracted my attention via the front bumper over riders and grille guard.  I've got a 51 wagon with something quite similar and thought it was a marriage.  I'm thinking now possibly an aftermarket or dealer option for Crosley.  Anyone else encounter something like this?

Re: NooB from Ohio

paul
 

Folks,  I live in Dayton, knew this Crosley existed but never ventured to see it. we can't put it all on the dealer, he may have been sold a bill of goods too. we don't know how much Crosley he knows. who actually did the work? was it finished when he bought it? did he get it partially done and get in over his head doing or having the final work done? upgrading the doors to roll up windows wasn't an accident, that and probably changing to hydraulic brakes took someone knowledgeable about Crosleys. the pictures say it's a pretty car, the seats say comfortable, the propeller is a neat touch, two tone wheels are striking. it's still an overpriced, overdone, fun driver to play with and most viewers on a Saturday evening would never know the difference. maybe the dealer is hunting a sucker or maybe he got suckered himself and needs 12K just to get out from under it.  thank goodness Chris had the insight to ask, we have begun to educate him, but the dealer is getting lessons too. I was born this month but not just this morning,,,,   Paul Rinehart

On 7/20/2018 7:30 AM, Ron Dole wrote:
$12,000, and it doesn't even have a radio. Looks like that dealer is looking for that sucker who was just born.
P.S. , .......Don't be him.

Re: NooB from Ohio

Ron D.
 

$12,000, and it doesn't even have a radio. Looks like that dealer is looking for that sucker who was just born.
P.S. , .......Don't be him.

Re: Third set of 2018 Photos Uploaded

crosleyshortsport
 

You took some nice shots Jim !


On Thu, Jul 19, 2018, 10:50 PM Jim Bollman <Jim@...> wrote:
Here is Fridays photos
http://crosleyautoclub.com/18Nationals/2-Friday/index.html

As before tell me of any errors or omissions, like the last two messages saying 2019 photos.

Jim...

Re: Engine/ water pump cover wanted

Gary
 

Which pump- 4 or 6 bolt? I have one of each- 

Gary McFarlane

On Jul 19, 2018, at 12:27 PM, Joe Brownsberger <jbraunsberg@...> wrote:

Hi, does any one have a water pump cover available for sale, I only need the cover. Attached is have pictures of two cast iron blocks I'm trying to figure out what these holes are for. The oily looking block has a brass fitting stuck in it and the dry block just has an open hole.
<20180718_232620.jpg>
<20180718_232547.jpg>

Re: Engine/ water pump cover wanted

jane altman
 

Dave Edwards... Has a daytime job and one of the nicest guys I've ever dealt with
(419) 589-5767

Third set of 2018 Photos Uploaded

Jim Bollman
 

Here is Fridays photos
http://crosleyautoclub.com/18Nationals/2-Friday/index.html

As before tell me of any errors or omissions, like the last two messages saying 2019 photos.

Jim...

Re: Still waiting

David Reina
 

Wow Jak, That Chevy dealer got that many cars ahead of you to fix?

Dave

On Jul 19, 2018, at 5:08 PM, Jaks via Groups.Io <papajaks@...> wrote:

An I just called again and HE HASN’T STARTED YET
Oh well I always did wanto stay phor the antique motorcycle races (but that was when I had a place to stay-everything’s booked this weekend)

Re: Still waiting

crosleyshortsport
 

Jaks, are you stuck in Wauseon ?  


On Thu, Jul 19, 2018, 5:08 PM Jaks via Groups.Io <papajaks=aol.com@groups.io> wrote:
An I just called again and HE HASN’T STARTED YET
Oh well I always did wanto stay phor the antique motorcycle races (but that was when I had a place to stay-everything’s booked this weekend)

Re: Engine/ water pump cover wanted

Jim Bollman
 

Here is the vendor list it has contacts for a lot of parts suppliers. Service, Yankee and Edwards all have used parts that are not on their lists if you contact them.

Jim...

On Jul 19, 2018, at 5:37 PM, Joe Brownsberger <jbraunsberg@...> wrote:

I've searched both Service motors and Yankee Crosley and found nothing. That other parts guy I've never heard of.

On Thu, Jul 19, 2018, 4:59 PM crosleyshortsport <crosleyshortsport@...> wrote:
Joe,  You can purchase the cover from Yankee Crosley Parts or Service Motors or Dave Edwards parts

On Thu, Jul 19, 2018, 3:58 PM Joe Brownsberger <jbraunsberg@...> wrote:
Thanks for the help guys, and the water pump cover I need is a 6 bolt pattern.

On Thu, Jul 19, 2018, 2:48 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
Which water pump?

On Jul 19, 2018 1:27 PM, Joe Brownsberger <jbraunsberg@...> wrote:
Hi, does any one have a water pump cover available for sale, I only need the cover. Attached is have pictures of two cast iron blocks I'm trying to figure out what these holes are for. The oily looking block has a brass fitting stuck in it and the dry block just has an open hole.




Re: Engine/ water pump cover wanted

Gabriel Haddad
 

You will have to give them a call. That kind of item isn't something they would list on their websites. 
Additionly, you may want to look into buying a completely rebuilt pump. The bushings, impeller shaft and, packing all need to be in proper order before you put it in service.
Regards, Gabe.

On Jul 19, 2018 5:37 PM, "Joe Brownsberger" <jbraunsberg@...> wrote:
I've searched both Service motors and Yankee Crosley and found nothing. That other parts guy I've never heard of.

On Thu, Jul 19, 2018, 4:59 PM crosleyshortsport <crosleyshortsport@...> wrote:
Joe,  You can purchase the cover from Yankee Crosley Parts or Service Motors or Dave Edwards parts

On Thu, Jul 19, 2018, 3:58 PM Joe Brownsberger <jbraunsberg@...> wrote:
Thanks for the help guys, and the water pump cover I need is a 6 bolt pattern.

On Thu, Jul 19, 2018, 2:48 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
Which water pump?

On Jul 19, 2018 1:27 PM, Joe Brownsberger <jbraunsberg@...> wrote:
Hi, does any one have a water pump cover available for sale, I only need the cover. Attached is have pictures of two cast iron blocks I'm trying to figure out what these holes are for. The oily looking block has a brass fitting stuck in it and the dry block just has an open hole.


Re: Engine/ water pump cover wanted

Joe Brownsberger
 

I've searched both Service motors and Yankee Crosley and found nothing. That other parts guy I've never heard of.


On Thu, Jul 19, 2018, 4:59 PM crosleyshortsport <crosleyshortsport@...> wrote:
Joe,  You can purchase the cover from Yankee Crosley Parts or Service Motors or Dave Edwards parts

On Thu, Jul 19, 2018, 3:58 PM Joe Brownsberger <jbraunsberg@...> wrote:
Thanks for the help guys, and the water pump cover I need is a 6 bolt pattern.

On Thu, Jul 19, 2018, 2:48 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
Which water pump?

On Jul 19, 2018 1:27 PM, Joe Brownsberger <jbraunsberg@...> wrote:
Hi, does any one have a water pump cover available for sale, I only need the cover. Attached is have pictures of two cast iron blocks I'm trying to figure out what these holes are for. The oily looking block has a brass fitting stuck in it and the dry block just has an open hole.

Still waiting

Jaks
 

An I just called again and HE HASN’T STARTED YET
Oh well I always did wanto stay phor the antique motorcycle races (but that was when I had a place to stay-everything’s booked this weekend)

Re: Engine/ water pump cover wanted

crosleyshortsport
 

Joe,  You can purchase the cover from Yankee Crosley Parts or Service Motors or Dave Edwards parts


On Thu, Jul 19, 2018, 3:58 PM Joe Brownsberger <jbraunsberg@...> wrote:
Thanks for the help guys, and the water pump cover I need is a 6 bolt pattern.

On Thu, Jul 19, 2018, 2:48 PM Spock Arnold via Groups.Io <tmkldwwj=yahoo.com@groups.io> wrote:
Which water pump?

On Jul 19, 2018 1:27 PM, Joe Brownsberger <jbraunsberg@...> wrote:
Hi, does any one have a water pump cover available for sale, I only need the cover. Attached is have pictures of two cast iron blocks I'm trying to figure out what these holes are for. The oily looking block has a brass fitting stuck in it and the dry block just has an open hole.