Date   

LiL PHoot

"mcriverbug" <mcriverbug@...>
 

I think it belongs to DR. Phartz aka - Jak That is so cool,it
reminds me of a large roller skate. - John


Re: lil phoot

Papajaks@...
 

hi jon, thanks phor noting lil phoot. i set the roundside body on the 83"
wb
CJ-5 chassis and running gear. had to cut away the phire wall to accommodate
the 6 cyl [3 cyls under the hood, 3 and carter under the dash], cut a little
phrom
wheel wells, cut a battery tray on passenger well [master cylinder occupies
orig]
dropped in a nash metropolitan radiator and built a box around the portion of
the engine in the cab. now i just need some insulation between the
accelerator and that exhaust manifold phor the summer months.

jak phillips


lil phoot

"jonathan davis" <fiat103d@...>
 

HI
I SAW THE LIL PHOOT IN THE GROUP PHOTOS.WHO OWNS IT.HOW DID YOU DO IT.
THANKS
JON


_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com


Re: '48 parking-lamp socket.

"crsoleykid" <Phs962@...>
 

--- In Crosley_Gang@y..., x779@w... wrote:
I have a set of round frosted-glass parking lights for my '48 CC
SW, but
am missing one of the sockets that fits inside the lens. Can anyone
help? Thanks.

Regards....
Lou
Lou,
If you mean the socket that the bulb fits in it is
" Echlin # LS 6114 " . If it is the part that the lens fits in
you might try the garage section on the home page .I remember
somthing about that in there.

Paul
Phs962@...


'48 parking-lamp socket.

x779@...
 

I have a set of round frosted-glass parking lights for my '48 CC SW, but
am missing one of the sockets that fits inside the lens. Can anyone
help? Thanks.

Regards....
Lou
~~~~~~~~~~~~~ **-=&#92;/=-** ~~~~~~~~~~~~~

The opposite of bravery is not cowardice, but conformity.
– Robert Anthony


Re: Did Crosley sell trailers?

Jim Bollman <Jim@...>
 

I never saw an answer to this question so I guess I'll take a stab at it. There is currently a Crosley Trailer company.

Crosley Trailers, Inc.
US Hwy. 301 S
Starke, FL. 32091
(800) 940-8331
(904) 964-3842

I don't know if there is a family connection but no connection to the original company.

I think the car company may have made small trailers during the war along with a lot of other things but I'm not sure why I'm remembering that.
http://www.ggw.org/~cac/War_Years.html

Jim...

I have come across a really cute little trailer. It looks like it
would be Crosley size (or other small car). Did Crosley ever make or
sell trailers? Thanks, Hal


1952 Crosley Delivery

"gruffon2002" <gruffon2002@...>
 

I hope someone out there will be able to help me, I am looking for
two rear taillights and a hood ornament for this perticular car if
there after market that's okay, if there the original that's even
better, I'm just hoping that someone out there is able to help.
Thank you,
G2002


restoration

"jonathan davis" <fiat103d@...>
 

hi
on a scale of 1-10 how hard would you say it is to restore a crosley?
thanks
jon


_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com


Another Yahoo trick

"bltlar" <bltlar@...>
 

FYI,

I found out about another Yahoo ploy to track our web habits and Yahoo
has already placed a "web beacon" on our computer for those of us who
are signed up with Yahoo. Yahoo is using the web beacon to track you
around the net & see what you are doing.

If you want to opt out of this new marketing ploy by Yahoo, click on
the
following link http://privacy.yahoo.com/privacy/us/pixels/details.html

About halfway down the page, on the right side and in bold, you'll
find
"Outside the Yahoo! Network." There's a tiny little link that lets you
opt-out of their electronic snooping.

It says, "Please click here to opt-out."


Re: floor pans

"johnniemann1999" <johnniemann1999@...>
 

--- In Crosley_Gang@y..., "jonathan davis" <fiat103d@h...> wrote:
hi all,
does anyone have or knows someone who has floorpans for a 47
sedan.help!!!
thanks
jon



_________________________________________________________________
Get your FREE download of MSN Explorer at
http://explorer.msn.com/intl.asp.

Hi Jon
On the bottom of the home page gives the crosley club home site,
www.gge.org/cac they have a list of vender, and how to contact them.
The one I have delt with is Yankee Crosley Parts which has
floor .
John


Re: Convertible tops!

carlo airdo <airdo@...>
 

HI, my 1952 convertible top has snaps only in the rear, the sides fit
into the rain rail. I believe this is correct as my top was made from
the worn out old top. I could be wrong but, thats how mine fits. Thanks,
Carlo.

x779@... wrote:

Who has had good luck with gettng new CC convertible tops? The big
difference between CC and CD tops is, I believe, the CCs have only
front
snaps, and the CDs have only side snaps plus the improved front
mounting
piece.

Incidentally, I have a "boot" for my '47 CC convertible. It snaps onto

the body when the top is off, and runs across the rear right up to
where
the oak side railings begin. It's a nice finishing touch.
Thought I'd pass that along to whomever wants to make one.

Regards....
Lou
~~~~~~~~~~~~~ **-=&#92;/=-** ~~~~~~~~~~~~~

The opposite of bravery is not cowardice, but conformity.
– Robert Anthony


Yahoo! Groups Sponsor
ADVERTISEMENT



To unsubscribe from this group, send an email to:
Crosley_Gang-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]


Convertible tops!

x779@...
 

Who has had good luck with gettng new CC convertible tops? The big
difference between CC and CD tops is, I believe, the CCs have only front
snaps, and the CDs have only side snaps plus the improved front mounting
piece.

Incidentally, I have a "boot" for my '47 CC convertible. It snaps onto
the body when the top is off, and runs across the rear right up to where
the oak side railings begin. It's a nice finishing touch.
Thought I'd pass that along to whomever wants to make one.

Regards....
Lou
~~~~~~~~~~~~~ **-=&#92;/=-** ~~~~~~~~~~~~~

The opposite of bravery is not cowardice, but conformity.
– Robert Anthony


Re: Crosley Gang Back Up

"oldham" <oldham@...>
 

Hi Jim...

Just wanted you to know that I DID get your message via e-mail...

CCC

----- Original Message -----
From: "Jim Bollman" <Jim@...>
To: <Crosley_Gang@...>
Sent: Tuesday, April 16, 2002 7:09 PM
Subject: Re: [Crosley_Gang] Crosley Gang Back Up


Guess I spoke to soon it went back down again. This is a test to see
if the mail side is still working. This was sent at 10:10PM on 4/16.

Jim...


Looks like Yahoo fixed whatever was broke on our message board for the
last 2 days. I was about to send them a message when I thought I would
check what all was broke and it was back up.

To unsubscribe from this group, send an email to:
Crosley_Gang-unsubscribe@...



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


Re: New Club

"lotuseleven" <dstiana@...>
 

Jim,
Oops!
I'm not sure but maybe I need to apologize. I belong to only
two other Yahoo groups (I thought it was more), Hmod and Lotus
-cars and since I get individual e-mails I don't see any ads
unless it's from our Crosley site. However, if I go to any of
my group sites, "all" have ads and I now believe that's what you
were referring to. Again, sorry about that.

Don Tiana
Topanga Cyn.CA.


--- In Crosley_Gang@y..., Jim Bollman <Jim@B...> wrote:
Can you give me an example of a group without the ads? I belong to
20 groups and spot checked more than half of them and all had ads.
I
have nothing in my configuration that I can find to reduce or
remove
the ad presents. The Club boards, before they were switched to
Groups, didn't have many ads, maybe that is what your remembering.

By the way I'm not making any changes to a paid Group right away if
ever. I started looking into alternative sites when YaHoo lost our
original club in conversion. All the free ones I have found were
either limited in what they offered or had many of the same
problems
as YaHoo. If I go forward it will be with plenty of notice and
some
trial runs to see if that is the direction we want to go.

Jim...

What I find strange is that the other
"car and shop" Yahoo groups I belong to don't have the same
format as this new Crosley Club, they don't have the ads.

Don Tiana
Topanga Cyn. CA.


Re: New Club

Jim Bollman <Jim@...>
 

Can you give me an example of a group without the ads? I belong to 20 groups and spot checked more than half of them and all had ads. I have nothing in my configuration that I can find to reduce or remove the ad presents. The Club boards, before they were switched to Groups, didn't have many ads, maybe that is what your remembering.

By the way I'm not making any changes to a paid Group right away if ever. I started looking into alternative sites when YaHoo lost our original club in conversion. All the free ones I have found were either limited in what they offered or had many of the same problems as YaHoo. If I go forward it will be with plenty of notice and some trial runs to see if that is the direction we want to go.

Jim...

What I find strange is that the other
"car and shop" Yahoo groups I belong to don't have the same
format as this new Crosley Club, they don't have the ads.

Don Tiana
Topanga Cyn. CA.


floor pans

"jonathan davis" <fiat103d@...>
 

hi all,
does anyone have or knows someone who has floorpans for a 47 sedan.help!!!
thanks
jon



_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.


Re: Looking at New Home for Online Club

"cosmicray48236" <sgreiner@...>
 

--- In Crosley_Gang@y..., "Jim_Bollman" <Jim@B...> wrote:
I'm looking into a new home for our online club. Would you be
willing
to pay a small $3-10/year fee for a site with no ads but the ones we
post. Hopefully a simpler registration and posting process. It
isn't
completely up and running yet but pretty much all the services we
use
on Yahoo could be made available including email but no ads mailed
to
the email, group chats, photo albums, 1 to 1 chats, private message
boxes for members, calendar, etc.

I'm trying to get a deal so at least some level could remain free.
Just looking into some feedback to see if I should go forward or
not.

Jim...
Go for it. I hate ads. Skip


Re: problem

Jim Bollman <Jim@...>
 

AJ,

If you don't find one on this list Dave Edwards or Service Motors will have them. If it is just the small spring clips that hold the bearing in place, they are available also from I believe both of them. Their addresses and Phone numbers can be got off the clubs vendor page.
http://www.ggw.org/~cac/PartsSuppliers.html

Since you are from North West Ohio don't forget the Crosley National Show in your back yard, July 12th-13th at the Fairgrounds in Wauseon Ohio.

Jim...



hi, we have an engine of yours but the throw-out bearing fork is
broken and we need a new one but we cant find one any where.if you
have any way to find one or any information that could help us out
please contact me by e-mail: consolidated_box@... , or call
me at:(419)841-8808, ur help will be greatly appreciated.
thanks,
A.J. Koprowski
&#92;


new home

"chuckhk1941" <chuckhk@...>
 

It's been 3 days of trying just to see the messages-Yahoo Groups
doesn't like me-Jim-Do what you think is best--I'll be with you.Chuck


Re: Battery Cables

"johnniemann1999" <johnniemann1999@...>
 

What I have learned is the 6 volt system uses the same 0 gage wire
used on large trucks.
John

-- In Crosley_Gang@y..., "for365nc" <Dancerjohn@a...> wrote:
Need some help on the correct gauge cable to use for battery cables
on the 6-volt Crosley system. Thanks.
John