It looks like the original Fram CH11RP filter that came from Crosley on the later model cars, 51 and 52's? The Fram filter isn't available anymore unfortunately. That is why Service Motors and

This oil filter adapter and filter are on my 1951 Super that I just purchased. Can anyone tell me anything about it? Filter adapter kits I see from the current parts suppliers online appear to be

You may use shim stock.

Or was it really just 2 Crosley CIBA's? Maybe not... I really love this modified Cros, a marriage that was made to be.

It helps but it still only 26 hp.

I ordered a reamer and bushing kit on eBay. I’m going to give that a try. I used to use those kits many years ago. However I do have a Tillotson carb on a 50 Crosley wagon that I might throw on

A temporary fix might be to pack the gap with some thick old fashioned axle grease to seal the leak. You would have to reapply every now and then when the gas fumes dissolve the grease.

Some may disagree with me, however I suggest changing the carb to a Tillotson. Once they are properly set, they keep working, trouble free.

Hi, My 51 Crosley with the Carter WO carburetor has a wicked vacuum leak at the end of the throttle shaft in the base of the carburetor. Can't keep the car running stalls at idle. Has anyone had any

That is pretty nifty! Always liked the Buick straight 8’s. - Park

The new Crosley of the Month is ready. http://crosleyautoclub.com/ Enjoy Jom...

That is Joe Kaczmar of Kalazamoo Michigan

Does anyone have the contact information for the person selling instrument clusters at the Nationals? (picture 1 of 5 on Saturday) Thank you, Mike Chicconi

I have 1&1/2 put on all mine and yes it helps a lot. By straight thru I assume you intend a muffler too ? I'd use at least a resonator, otherwise the sound is a bit rough.

Does it pay to enlarge exhaust from stock size to 1.5 inches straight thru will there be a noticeable increase in power?

Michael, You can also get those panels from Yankee Crosley Parts. He has a nice set of originals to trace and cut new ones.

Mike; probably not. However, the guy who made mine is just a few miles away from there. Fixitall in Hamburg Pa. Tell Rob I sent you. Also, you could contact Tim Hamblim who does nice work also.

Are there going to be any Crosley parts venders at Macungie this weekend? I need interior panels and a headliner for a CC Pick Up. Mike Braun 302-270-4703.

The fellow with the doors has contacted me, thanks guys!

I did the manifold nuts the old fashion way. I used an open end wrench, moved it a fraction of an inch, then flipped the wrench, and moved it a fraction, then flipped the wrench and moved it a