Date   

Re: FOR rear drum photos

Brian Dlapa
 

im interested

On Friday, March 19, 2021, 10:16:56 AM CDT, Steve Olinger <olinger@...> wrote:


Hi Jeff,
        What are you asking for it? My email is olinger@...
Thanks
Steve




On Fri, 19 Mar, 2021 at 10:58 AM, jeff <jeffalyon@...> wrote:
 
To: crosley-gang@groups.io
Steve, not yet.  It is still available. 

Jeff



Sent from my jphone


-------- Original message --------
From: "Steve Olinger via groups.io" <solinger=rockingham.k12.va.us@groups.io>
Date: 3/19/21 6:34 AM (GMT-08:00)
Subject: Re: [Crosley-Gang] FOR rear drum photos

Hi Jeff,
          Have you sold the rear drum? Thanks Steve


Re: FOR rear drum photos

Steve Olinger
 

Hi Jeff,
        What are you asking for it? My email is olinger@...
Thanks
Steve




On Fri, 19 Mar, 2021 at 10:58 AM, jeff <jeffalyon@...> wrote:
 
To: crosley-gang@groups.io
Steve, not yet.  It is still available. 

Jeff



Sent from my jphone


-------- Original message --------
From: "Steve Olinger via groups.io" <solinger=rockingham.k12.va.us@groups.io>
Date: 3/19/21 6:34 AM (GMT-08:00)
Subject: Re: [Crosley-Gang] FOR rear drum photos

Hi Jeff,
          Have you sold the rear drum? Thanks Steve


Re: FOR rear drum photos

jeff <jeffalyon@...>
 

Steve, not yet.  It is still available. 

Jeff



Sent from my jphone


-------- Original message --------
From: "Steve Olinger via groups.io" <solinger@...>
Date: 3/19/21 6:34 AM (GMT-08:00)
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] FOR rear drum photos

Hi Jeff,
          Have you sold the rear drum? Thanks Steve


Re: FOR rear drum photos

Steve Olinger
 

Hi Jeff,
          Have you sold the rear drum? Thanks Steve


Re: CC Crosley Hood Latch

Paula W
 

Because I have learned Crosleys are a little like snowflakes, I am posting a drawing of our hood latch installation as compared to an excerpt of the drawing Dave Edwards did and that Dave Aschliman graciously provided earlier in the thread. You'll note that our car has only one bracket. (Dennis - the hoodlatch in the photo you provided  for your 47 pickup is like this too I think.) I found remnants of the two springs noted in Dave Edward's full drawing but I still can't find out how they are to be connected, even though I believe I do know what they're supposed to do. I hope to reach Dave Edwards  for advice on that. If you read the published print on Dave's drawing you see that the big spring was added in mid 47 as an auxiliary spring; a retrofit. My guess is the first iteration were the two coil springs alone and these may have been problematic. The question is whether they are needed at all.
Am continuing to clean parts, blithely ignoring headlight removal and Douglas connectors. Will post some curated photos when done.


Re: CC Crosley Hood Latch

Jim Aschliman
 

Dave Edwards is great to work with and has many hard to find parts...his number is 419 5895767


Re: FOR parts

Spock Arnold
 

about an hour or a little more

On Thursday, March 11, 2021, 04:14:07 PM EST, Brian Dlapa via groups.io <treestumpbvd@...> wrote:



i am interested dave how close to barry is that
On Thursday, March 11, 2021, 02:45:30 PM CST, Steve <sharc@...> wrote:


In Lebanon pa so if any one is interested they can contact me anytime

Sent from Xfinity Connect App



------ Original Message ------

From: Spock Arnold via groups.io
To: Crosley-Gang@groups.io
Sent: March 11, 2021 at 3:18 PM
Subject: Re: [Crosley-Gang] FOR parts

You have what appears to be the rear shaft for the hydraulic system/draw bar and the front lift system for the front mower.  The answer is yes, they have value, and yes, there are people who would want to buy them.  Where are you?  your best bet might be to get a member in your area to come and look at what you have.  

On Thursday, March 11, 2021, 02:19:40 PM EST, Steve <sharc@...> wrote:


I have a couple parts for a farm-o-road attachment?  Not sure what exactly they are for or if complete been sitting outside for a while, but before they get lost was wondering if anyone could identify or had interest in them. I do know that one part not pictured is a three head mower deck set of transmissions. 

Attachments:


Re: CC Crosley Hood Latch

Paula W
 

This is very helpful.
I seem to be missing two springs!
I hope to get a closer look this weekend. 


On Thu, Mar 11, 2021 at 4:08 PM, Jim Liberty
<jimliberty356@...> wrote:
Thanks for the drawing Jim. I have copied it for my assembly.     .........................Jim.

On Thu, Mar 11, 2021 at 4:05 PM Jim Aschliman <jaschliman@...> wrote:
Dave Edwards sent me the attached drawing when I ordered some parts for the hood latch on my 48 pick up.  Hope it helps.  Jim

Attachments:


Re: CC Crosley Hood Latch

Jim Liberty
 

Thanks for the drawing Jim. I have copied it for my assembly.     .........................Jim.

On Thu, Mar 11, 2021 at 4:05 PM Jim Aschliman <jaschliman@...> wrote:
Dave Edwards sent me the attached drawing when I ordered some parts for the hood latch on my 48 pick up.  Hope it helps.  Jim

Attachments:


Re: CC Crosley Hood Latch

Jim Aschliman
 

Dave Edwards sent me the attached drawing when I ordered some parts for the hood latch on my 48 pick up.  Hope it helps.  Jim


Re: FOR parts

Rapkathy@...
 

Steve, I’m interested also.


Re: FOR parts

Steve
 

 

Sent from Mail for Windows 10

 

From: Steve
Sent: Thursday, March 11, 2021 5:22 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] FOR parts

 

I’m in south central PA. From what I’m told it’s the rear hydraulics and the front mower transmissions and mounting bar but I do not have the mower deck that we’ve come across yet. I will get more pictures this weekend. And I will post them then.

 

 

Sent from Mail for Windows 10

 

From: L.E. Hardee
Sent: Thursday, March 11, 2021 4:41 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] FOR parts

 

Steve, I am possible interested but can't get the pictures to open.  I have 4 Farm-O-Roads and some equipment but am missing some pieces.  Can you send them to me again?  I have the front mount and pto for the mower but no deck and transmissions.   Where are you located?  I am in Eastern NC.  Thanks.

 

On Thu, Mar 11, 2021 at 2:19 PM Steve <sharc@...> wrote:

I have a couple parts for a farm-o-road attachment?  Not sure what exactly they are for or if complete been sitting outside for a while, but before they get lost was wondering if anyone could identify or had interest in them. I do know that one part not pictured is a three head mower deck set of transmissions. 

Attachments:

 

 


Re: FOR parts

Steve
 

I’m in south central PA. From what I’m told it’s the rear hydraulics and the front mower transmissions and mounting bar but I do not have the mower deck that we’ve come across yet. I will get more pictures this weekend. And I will post them then.

 

 

Sent from Mail for Windows 10

 

From: L.E. Hardee
Sent: Thursday, March 11, 2021 4:41 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] FOR parts

 

Steve, I am possible interested but can't get the pictures to open.  I have 4 Farm-O-Roads and some equipment but am missing some pieces.  Can you send them to me again?  I have the front mount and pto for the mower but no deck and transmissions.   Where are you located?  I am in Eastern NC.  Thanks.

 

On Thu, Mar 11, 2021 at 2:19 PM Steve <sharc@...> wrote:

I have a couple parts for a farm-o-road attachment?  Not sure what exactly they are for or if complete been sitting outside for a while, but before they get lost was wondering if anyone could identify or had interest in them. I do know that one part not pictured is a three head mower deck set of transmissions. 

Attachments:

 


Re: FOR parts

L.E. Hardee
 

Steve, I am possible interested but can't get the pictures to open.  I have 4 Farm-O-Roads and some equipment but am missing some pieces.  Can you send them to me again?  I have the front mount and pto for the mower but no deck and transmissions.   Where are you located?  I am in Eastern NC.  Thanks.


On Thu, Mar 11, 2021 at 2:19 PM Steve <sharc@...> wrote:
I have a couple parts for a farm-o-road attachment?  Not sure what exactly they are for or if complete been sitting outside for a while, but before they get lost was wondering if anyone could identify or had interest in them. I do know that one part not pictured is a three head mower deck set of transmissions. 


Re: FOR parts

Brian Dlapa
 


i am interested dave how close to barry is that

On Thursday, March 11, 2021, 02:45:30 PM CST, Steve <sharc@...> wrote:


In Lebanon pa so if any one is interested they can contact me anytime

Sent from Xfinity Connect App



------ Original Message ------

From: Spock Arnold via groups.io
To: Crosley-Gang@groups.io
Sent: March 11, 2021 at 3:18 PM
Subject: Re: [Crosley-Gang] FOR parts

You have what appears to be the rear shaft for the hydraulic system/draw bar and the front lift system for the front mower.  The answer is yes, they have value, and yes, there are people who would want to buy them.  Where are you?  your best bet might be to get a member in your area to come and look at what you have.  

On Thursday, March 11, 2021, 02:19:40 PM EST, Steve <sharc@...> wrote:


I have a couple parts for a farm-o-road attachment?  Not sure what exactly they are for or if complete been sitting outside for a while, but before they get lost was wondering if anyone could identify or had interest in them. I do know that one part not pictured is a three head mower deck set of transmissions. 

Attachments:


Re: FOR parts

Steve
 

In Lebanon pa so if any one is interested they can contact me anytime

Sent from Xfinity Connect App



------ Original Message ------

From: Spock Arnold via groups.io
To: Crosley-Gang@groups.io
Sent: March 11, 2021 at 3:18 PM
Subject: Re: [Crosley-Gang] FOR parts

You have what appears to be the rear shaft for the hydraulic system/draw bar and the front lift system for the front mower.  The answer is yes, they have value, and yes, there are people who would want to buy them.  Where are you?  your best bet might be to get a member in your area to come and look at what you have.  

On Thursday, March 11, 2021, 02:19:40 PM EST, Steve <sharc@...> wrote:


I have a couple parts for a farm-o-road attachment?  Not sure what exactly they are for or if complete been sitting outside for a while, but before they get lost was wondering if anyone could identify or had interest in them. I do know that one part not pictured is a three head mower deck set of transmissions. 

Attachments:


Re: FOR parts

Spock Arnold
 

You have what appears to be the rear shaft for the hydraulic system/draw bar and the front lift system for the front mower.  The answer is yes, they have value, and yes, there are people who would want to buy them.  Where are you?  your best bet might be to get a member in your area to come and look at what you have.  

On Thursday, March 11, 2021, 02:19:40 PM EST, Steve <sharc@...> wrote:


I have a couple parts for a farm-o-road attachment?  Not sure what exactly they are for or if complete been sitting outside for a while, but before they get lost was wondering if anyone could identify or had interest in them. I do know that one part not pictured is a three head mower deck set of transmissions. 


FOR parts

Steve
 

I have a couple parts for a farm-o-road attachment?  Not sure what exactly they are for or if complete been sitting outside for a while, but before they get lost was wondering if anyone could identify or had interest in them. I do know that one part not pictured is a three head mower deck set of transmissions. 


Re: Fuel gauge dies

Richard Williams
 

I use a battery tender on my cars all the time. You will be just fine with it in the car connected.

On Wednesday, March 10, 2021, 01:54:45 PM PST, Paula W <paula_whitney@...> wrote:


While my sending unit ground problem persists, may I still use a Battery Tender on the car? (I'm only just learning about electrical systems on older cars and all the first chapters of my resources emphasize safety, as they should.)

Alternatively, I'll can take the battery out of the car, but would prefer not too.


Re: Fuel gauge dies

Jim Liberty
 

Just disconnect the ground at the battery when you work on anything electrical.      ................Jim.

On Wed, Mar 10, 2021 at 1:54 PM Paula W <paula_whitney@...> wrote:
While my sending unit ground problem persists, may I still use a Battery Tender on the car? (I'm only just learning about electrical systems on older cars and all the first chapters of my resources emphasize safety, as they should.)

Alternatively, I'll can take the battery out of the car, but would prefer not too.

801 - 820 of 40046