Date   

Re: Engine Toque Settings

re moore
 


Hi all, Another engine rebuild question. One step closer to finished this after many years.  Can you help me with the firing order and degrees of timing from plus or minus of TDC. Thanks

On Thursday, December 31, 2020, 6:37:08 PM PST, re moore <wagonmaster142@...> wrote:


Thanks Jim, Inch pounds noted. This is a great forum. Pics when rebuild done.
Rick 

On Thursday, December 31, 2020, 12:48:43 PM PST, re moore via groups.io <wagonmaster142@...> wrote:


Can someone please provide me with the Toque settings for the main and rod bolts. Thanks and Happy New Year (Its got to be better than the last one!)


New Crosley of the Month

Jim Bollman
 

Here is the latest CotM, enjoy.
http://crosleyautoclub.com/

Jim...


Crosley engine

Jon Ciauri
 

I drove to so-cal last Friday to pickup a crosley engine that spent the last 30 years sitting on a friends garage floor. I received not only the engine but a box full of related parts .new water pump,tube exhaust header,aluminum oil pan,boxes of bearings,seals, etc. When I got home,I took the engine apart.The serial number stamped on the. Left side of the crankcase is131114c . I am still evaluating the condition of everything.

Jon Ciauri 9094556830
St georage,Utah


Re: Hotshot on Ebay

Gabriel Haddad
 

Hi Jeff, its a nice looking VC. Good luck.


On Sun, Jan 31, 2021, 2:34 PM jeff <jeffalyon@...> wrote:
I listed my Hotshot on Ebay for sale today but Ebay would not accept Crosley as the make.  So I listed it under Cadillac. 
Jeff

Attachments:


Hotshot on Ebay

jeff
 

I listed my Hotshot on Ebay for sale today but Ebay would not accept Crosley as the make.  So I listed it under Cadillac. 
Jeff


Re: WTB strapped main crankcase

seb fontana
 

SHOUT OUT--Me too!


Re: WTB strapped main crankcase

crosleyshortsport
 

Jeremy, I may have what you are looking for. 

On Fri, Jan 29, 2021, 8:09 PM Jeremy Rutherford <jruthe2@...> wrote:
I’m still looking for a heavier duty strapped main crankcase from a military generator or the like.  Please send me a message if you might have something... thanks 


WTB strapped main crankcase

Jeremy Rutherford
 

I’m still looking for a heavier duty strapped main crankcase from a military generator or the like.  Please send me a message if you might have something... thanks 


Re: 1949 VC

ray tooley
 

Craig hauled my hot shot from Lincoln Nebraska  to Evansville Indiana  for less than half of  everyone else. And a very nice and caring  person. Highly recommended  817 980 6272 tell him ray sent you. I won't be disappointed. 


On Mon, Jan 25, 2021 at 2:55 PM, David Stubenvoll
<David.Stubenvoll@...> wrote:
It’s a ‘49 VC going from Eugene Oregon to Green Bay Wisconsin. 


Re: 1949 VC

dave p
 

@David Stubenvoll ,  Call me.  My transporter  has a base in Salem OR and will give you a  reasonable price and good service
 
Dave Perry    OldSchool Restorations of North Alabama   USA            256 507 3328


Re: 1949 VC

David Stubenvoll
 

It’s a ‘49 VC going from Eugene Oregon to Green Bay Wisconsin. 


Re: 1949 VC

ray tooley
 

Where do you need to call to and from and what kind of car is it and does it have to be enclosed or not


On Mon, Jan 25, 2021 at 8:34 AM, David Stubenvoll
<David.Stubenvoll@...> wrote:
Hello again, I’m still looking for affordable transportation. I have two possibilities so far but nothing confirmed. I contacted a number of brokers but didn’t feel comfortable with their responses. Reliable didn’t even quote it. I just can’t afford or even justify the $3000 to $4000 prices I’m getting. 


Re: 1949 VC

nadno1
 

There is a guy on the model that site that hauls a lot of cars, goes by Freighter Jim, never used him but seems like it is always hauling for someone, may  be worth checking out.



Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------
From: David Stubenvoll <David.Stubenvoll@...>
Date: 1/25/21 8:34 AM (GMT-06:00)
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] 1949 VC

Hello again, I’m still looking for affordable transportation. I have two possibilities so far but nothing confirmed. I contacted a number of brokers but didn’t feel comfortable with their responses. Reliable didn’t even quote it. I just can’t afford or even justify the $3000 to $4000 prices I’m getting. 


Re: 1949 VC

David Stubenvoll
 

Yes, I talked to that hauler Last week, Freighter Jim. His current route will swing through way south of me. 
He will let me know when and if he has a load aligned that will work for me. 


Re: 1949 VC

Spock Arnold
 

Did you look on the AACA website, www.aaca.org?  I just looked this am and there was a guy going california to Indiana at 1.00 per mile.  Go to forums commercial advertisements tow teansport available.  

On Jan 25, 2021 9:34 AM, David Stubenvoll <David.Stubenvoll@...> wrote:
Hello again, I’m still looking for affordable transportation. I have two possibilities so far but nothing confirmed. I contacted a number of brokers but didn’t feel comfortable with their responses. Reliable didn’t even quote it. I just can’t afford or even justify the $3000 to $4000 prices I’m getting. 


Re: 1949 VC

crosleyshortsport
 

David, This guy is excellent to work with, reliable, and trustworthy. And has experience moving Crosleys.


On Mon, Jan 25, 2021, 10:25 AM Steve Perry <sperryfish@...> wrote:
OK.. my wife reminded me.. Rich has shipped a couple of my cars but the buyer paid. So, I don’t know about the pricing.. sorry for the mixup.
Steve


On Jan 25, 2021, at 8:34 AM, David Stubenvoll <David.Stubenvoll@...> wrote:

Hello again, I’m still looking for affordable transportation. I have two possibilities so far but nothing confirmed. I contacted a number of brokers but didn’t feel comfortable with their responses. Reliable didn’t even quote it. I just can’t afford or even justify the $3000 to $4000 prices I’m getting. 


Re: 1949 VC

Steve Perry <sperryfish@...>
 

OK.. my wife reminded me.. Rich has shipped a couple of my cars but the buyer paid. So, I don’t know about the pricing.. sorry for the mixup.
Steve


On Jan 25, 2021, at 8:34 AM, David Stubenvoll <David.Stubenvoll@...> wrote:

Hello again, I’m still looking for affordable transportation. I have two possibilities so far but nothing confirmed. I contacted a number of brokers but didn’t feel comfortable with their responses. Reliable didn’t even quote it. I just can’t afford or even justify the $3000 to $4000 prices I’m getting. 


Re: 1949 VC

Steve Perry <sperryfish@...>
 

David,
I’ve used Rich with Enclosed Auto Transporters to haul a couple of cars and have been happy with the price and service. I found him when I sold an old MG to a dealer in New York. That dealer uses his service too.
His number is 901-487-1832
Steve Perry


On Jan 25, 2021, at 8:34 AM, David Stubenvoll <David.Stubenvoll@...> wrote:

Hello again, I’m still looking for affordable transportation. I have two possibilities so far but nothing confirmed. I contacted a number of brokers but didn’t feel comfortable with their responses. Reliable didn’t even quote it. I just can’t afford or even justify the $3000 to $4000 prices I’m getting. 


Re: 1949 VC

David Stubenvoll
 

Hello again, I’m still looking for affordable transportation. I have two possibilities so far but nothing confirmed. I contacted a number of brokers but didn’t feel comfortable with their responses. Reliable didn’t even quote it. I just can’t afford or even justify the $3000 to $4000 prices I’m getting. 


Re: Tyrone Mount's Wife Jill Passed Away

ray tooley
 

Praying for  him and his family 


On Sun, Jan 24, 2021 at 1:19 PM, Jim Bollman
<Jim@...> wrote:
Sad news Tyrone Mount’s Wife (Jill) who has come to Wauseon and the Keystone Meets many times passed away this morning. She was in the hospital with Covid while Tyrone is at home with the virus. 

Please keep Tyrone and his family in your thoughts and prayers.

501 - 520 of 39569