Date   

Re: front shock absorbers

Brett Wright
 

I have not checked the rear ones yet


front shock absorbers

Brett Wright
 

Someone must have experience with shock absorber action. My front shocks seem single action. No dampening on the up stroke (spring compressed) but great dampening on the downstroke (Spring rebound). Is that correct?. They are disconnected so I can test them. If they need rebuilt, any suggestion of a place to get that done or parts to do it myself.
Brett Wright
 


Re: Rewiring 1952 Crosley Super SW

 

Jeff,
    Thanx. Every little bit helps. You may get a call from me.......there be ghosts in the machine.


Re: Rewiring 1952 Crosley Super SW

crosleyshortsport
 

This may help, I am also available to help via phone call if needed. I can also send photos. Jeffrey  cell # 585-315-7005


On Thu, Apr 16, 2020, 6:16 PM Tilden Drinkard <TILDENLD@...> wrote:
I'm in the process of having to rewire my car. Does anyone have a wiring diagram with some more detail than the one in the service manual? I need a little more detail as to + & - especially
as it relates to the ignition system. 


Re: New member

Andy Farley
 

That's awesome. Thank You


Re: Turn signal switch and flashers for 1947 Crosley CC sedan

Richard Helm
 

John – I have a strap on type period turn signal switch from the 1950’s era that I would sell you for a reasonable price if that’s what you’re looking for. If you have any interest in it I’ll dig it out and send you a couple pictures.

Rich Helm

IL CAC member


Turn signal switch and flashers for 1947 Crosley CC sedan

John Schneiderman <john-schneiderman@...>
 

Wanted: 6 volt, 3-wire, turn signal switch and flasher unit.  Crosley parts list:  209355. To be installed on the steering wheel column of a 1947 Crosley Sedan. 
Suggested United Pacific Turn Signal Switch UPD-A5007 and flasher unit UPD-110252, but I would like something more period (1940's-1950's).

Please reply if anyone has one to sell. Provide a picture of the unit if possible.

Thank you
john-schneiderman@...


Re: New member

Jim Bollman
 

I just heard from Duane. He said your packet went in the mail this week.

Jim...

On Apr 15, 2020, at 3:59 PM, Andy Farley <farleya1@...> wrote:

I signed up for membership a few weeks ago. I was just wondering how long it takes to get acknowledgement of my application and member information.


Rewiring 1952 Crosley Super SW

 

I'm in the process of having to rewire my car. Does anyone have a wiring diagram with some more detail than the one in the service manual? I need a little more detail as to + & - especially
as it relates to the ignition system. 


Re: New member

crosleyshortsport
 

The direct email for Duane, the membership chairman is,  1959chevy@...
Send him a note, to be sure he received what he needs to send your welcome pack.   Usually takes 30 days or less.   Jeffrey

On Wed, Apr 15, 2020, 3:59 PM Andy Farley <farleya1@...> wrote:
I signed up for membership a few weeks ago. I was just wondering how long it takes to get acknowledgement of my application and member information.


crosleygarage.com - new videos and photos of Crosley Art Car

 

Hello all, I just posted a few new videos and photos of the Crosley Art Car. It will no longer be called the Crosley 18 wheeler as I gave the trailer back to my 1/2 brother 2 months ago. The trailer is still here in florida but I think it is going back to New Jersey for safe keeping at some point.
www.crosleygarage.com
Thanks 
Frank Pinto
St. Petersburg, FL


Wanted 1 or 2 Factory Trim Rings

Steve Olinger
 

Wanted To Buy, 1 or 2 of the factory trim rings (or wheel covers) like in photo in any condition.  Thanks Steve


Re: Oil pressure

Steve Perry
 

Thanks Butch..
I appreciate the help


Re: Oil pressure

Butch
 

Either, a mechanical or electric gauge will work. Finding a 6 volt electric gauge, in stock locally, might be a challenge. Any mechanical gauge will work, it is not voltage or vehicle specific.

Butch

On 4/15/2020 8:13 PM, Steve Perry wrote:
Hello All..
I started the car briefly on some starting fluid just to see if it would go. I will rig up a fuel supply tomorrow. I wanted to know if anyone has hooked up an oil pressure sender into the crankcase or if I need to use the type gauge with the oil line?
Im just hooking up something that I can read while I start and run the engine temporarily. The car will require a new wiring harness before I’m able to hook everything up normally.
Thanks,
Steve
_._,_._,


Virus-free. www.avast.com


Oil pressure

Steve Perry
 

Hello All..
I started the car briefly on some starting fluid just to see if it would go. I will rig up a fuel supply tomorrow. I wanted to know if anyone has hooked up an oil pressure sender into the crankcase or if I need to use the type gauge with the oil line?
Im just hooking up something that I can read while I start and run the engine temporarily. The car will require a new wiring harness before I’m able to hook everything up normally.
Thanks,
Steve


New member

Andy Farley
 

I signed up for membership a few weeks ago. I was just wondering how long it takes to get acknowledgement of my application and member information.


Re: Almquist in craigslist

James Dlapa
 

Good luck, 
Hope it is. Seems like a great deal

On Mon, Apr 13, 2020 at 6:43 PM Spock Arnold via groups.io <tmkldwwj=yahoo.com@groups.io> wrote:
I sent him a note to see if it is available.  If it is, I will try to buy it. 

On Apr 13, 2020 8:50 PM, James Dlapa <crosley1980@...> wrote:

Hi all, just ran across this on Craigslist in State College,PA. Wish it was closer. Looks like an Almquist on a fiat chassis. 


Hope it finds a good https://pennstate.craigslist.org/cto/d/state-college-1950s-beach-racer/7097453596.html



Re: Almquist in craigslist

Spock Arnold
 

I sent him a note to see if it is available.  If it is, I will try to buy it. 

On Apr 13, 2020 8:50 PM, James Dlapa <crosley1980@...> wrote:

Hi all, just ran across this on Craigslist in State College,PA. Wish it was closer. Looks like an Almquist on a fiat chassis. 


Hope it finds a good https://pennstate.craigslist.org/cto/d/state-college-1950s-beach-racer/7097453596.html



Re: Almquist in craigslist

James Dlapa
 

Looks very similar to the car in this article, and places it close to its origin. 


On Mon, Apr 13, 2020 at 5:50 PM James Dlapa via groups.io <crosley1980=gmail.com@groups.io> wrote:

Hi all, just ran across this on Craigslist in State College,PA. Wish it was closer. Looks like an Almquist on a fiat chassis. 


Hope it finds a good https://pennstate.craigslist.org/cto/d/state-college-1950s-beach-racer/7097453596.html


Almquist in craigslist

James Dlapa
 

Hi all, just ran across this on Craigslist in State College,PA. Wish it was closer. Looks like an Almquist on a fiat chassis. 


Hope it finds a good https://pennstate.craigslist.org/cto/d/state-college-1950s-beach-racer/7097453596.html