Date   

Re: Car jack

Richard Williams
 

I use a scissor jack as the bumper jack is less safe. It can slide over. Rich 

On Sunday, September 15, 2019, 05:52:07 PM PDT, <fred@...> wrote:


Mike's is a factory original, including the cardboard cover (case) from about 49 or 50. I have some round bases that I believe were from earlier cars.


Re: Car jack

fred@...
 

Mike's is a factory original, including the cardboard cover (case) from about 49 or 50. I have some round bases that I believe were from earlier cars.


Re: Car jack

Paula W
 

This is the jack that is in our Dad's car, a 1947 sedan.  It is the same color as the car and requires a bit of room to work it. I don't know if it came with the car, but it is interesting to me it is the same color.


Re: Car jack

Kenn Cahill
 

Mike, your jack is what I am used to seeing. If you use the handle as a unit of measure, it looks like Jim’s had part of the unthreaded part cut off, or it was just never as long to begin with.


Re: Car jack

Mike S
 

Here's the jack I got from Fred Sydral for my '48.  Not sure what year it would have originally came from.  Notice how it is not "threaded" as far on the rod as in Jim's photo above.
Mike Sal


Re: Car jack

Richard Helm
 

My 49 Hot Shot came with a round base. The screw jack looks the same.

Rich


Re: Car jack

Jim Bollman
 

Here is a standard Crosley jack, it also came with a round base, not sure when round versus rectangular bases fall  in production.

Jim...



On Sep 15, 2019, at 9:03 AM, Ron D. <rdole417@...> wrote:

My 49 CD came with a scissor jack, which I doubt was the factory jack. Any one have some up close pics of a factory jack? I go to a lot of flea markets, full of rusty old car parts, and would like to find this treasure, if I knew what I was looking for.


Car jack

Ron D.
 

My 49 CD came with a scissor jack, which I doubt was the factory jack. Any one have some up close pics of a factory jack? I go to a lot of flea markets, full of rusty old car parts, and would like to find this treasure, if I knew what I was looking for.


Re: Crosley Sheet Metal Question??

Mike <seller432@...>
 

Yeah I was thinking they must of had something. I can almost fit my whole hand through the gap. I plan on marking a filler piece and welding it in also should help stiffen fender up a bit.

On Sep 14, 2019, at 11:05 AM, kcahill@... wrote:





There was an angled piece of sheet metal that screwed to the toeboard. Weatherstripping went between the angled piece and the inside of the fender. The bottom of the angle was rusted off in this vehicle.
These parts are listed in the parts manual.

Attachments:
IMG_3049.jpg: https://groups.io/g/Crosley-Gang/attachment/37399/0



Re: Crosley Sheet Metal Question??

kcahill@...
 

There was an angled piece of sheet metal that screwed to the toeboard. Weatherstripping went between the angled piece and the inside of the fender. The bottom of the angle was rusted off in this vehicle.
These parts are listed in the parts manual.


Re: Crosley Sheet Metal Question??

Kenn Cahill
 

There was an angled piece of sheet metal that screwed to the footboard. Weatherstripping went between the angle metal and the inside of the front fender. It is listed in the parts manual.


Re: Crosley Sheet Metal Question??

Richard Williams
 

They were caulked to begin with I think. Rich

On Friday, September 13, 2019, 08:10:48 PM PDT, <parkhunter@...> wrote:


I had the same gap on my 48. I caulked it with a nice flexible black silicone. Looks fine. 

Park


Re: Crosley Sheet Metal Question??

parkhunter@...
 

I had the same gap on my 48. I caulked it with a nice flexible black silicone. Looks fine. 

Park


Re: Crosley Sheet Metal Question??

Barry Smedley
 

You just need to replace the small bracket, you will still have the gap, I think there was some rubber that was originally between the fender and firewall, I just stuffed some left over door rubber in mine looks just fine and keeps the water out.

 

Barry Smedley

 

From: Crosley-Gang@groups.io [mailto:Crosley-Gang@groups.io] On Behalf Of Mike via Groups.Io
Sent: Monday, September 09, 2019 11:28 PM
To: Crosley-Gang@groups.io
Subject: [Crosley-Gang] Crosley Sheet Metal Question??

 

On my 50 cd I noticed the fender is separated from the firewall/floor pan. Big gap are they supposed to be spot welded together or what’s the deal with it?
 I don’t seem to see any original spot welds just the little L bracket welded to fender and bolted to floor pan. 

Attached photo of it. 
 

Attachments:

This message contains confidential information intended solely for the use of the addressee(s) named above. Any review, disclosure, distribution, copying or use of the information by others is strictly prohibited. If you have received this message in error, please advise the sender by immediate reply and delete the original message. (English) Ce message contient des informations confidentielles destinées uniquement à l'usage du(des) destinataire(s) nommé(s) ci-dessus. Toute consultation, distribution, copie et utilisation du contenu de ce message est strictement prohibée. Si vous avez reçu ce message par erreur, SVP avisez l'expéditeur par réponse immédiate et effacez le message original. (French)


Crosley Sheet Metal Question??

Mike <seller432@...>
 

On my 50 cd I noticed the fender is separated from the firewall/floor pan. Big gap are they supposed to be spot welded together or what’s the deal with it?
 I don’t seem to see any original spot welds just the little L bracket welded to fender and bolted to floor pan. 

Attached photo of it. 
 


Re: Anyone parting out a super sport?

Plandersen
 

I have three of them. I only need 2. Dave said he wanted one of mine. I was going to trade for a flywheel cover and a wiring harness if he had one. Kent 


On Sep 8, 2019, at 21:16, Dennis Wilkinson <denkath@...> wrote:

I see that there is one on eBay in Ormond Beach, Florida, but they will not ship. Anyone in the club from that area that might be willing to get it shipped to me if I buy it? I don't need the transmition, maybe we could work out a deal? If not will pay for shipping cost and a reasonable amount for time.


Re: Anyone parting out a super sport?

Dennis Wilkinson
 

I see that there is one on eBay in Ormond Beach, Florida, but they will not ship. Anyone in the club from that area that might be willing to get it shipped to me if I buy it? I don't need the transmition, maybe we could work out a deal? If not will pay for shipping cost and a reasonable amount for time.


Re: On line photos

Plandersen
 

No It was Dave Anspach. I will see if I can find his email. Kent


On Sep 8, 2019, at 7:43 PM, Jim Bollman <Jim@...> wrote:

Are you looking for him? Was he also from WA?

Jim...

On Sep 8, 2019, at 10:35 PM, Plandersen <pkandersen@...> wrote:

Jim you do a great job.  I will try to make my 48 convertible worthy of such an honor.  Someone within the hierarchy of the club was interested in a radio of mine.  Last name started with an A if I remember right.  Kent

Kent Andersen, Mayor of the City of Royal City
PO Box 364
Royal City, WA  99357

Phone 509-346-1500
Fax 509-346-1540
Cell 509-760-5881
Email pkandersen@...





On Sep 8, 2019, at 2:50 PM, Jim Bollman <Jim@...> wrote:

Thanks for the reminder, I was out of town for a death in the family and completely forgot about it when I got home. I will try and get it up tonight.

Jim...

On Sep 8, 2019, at 5:20 PM, rpmansell@... wrote:

What happened with photo of month for Sept?(2891)




Re: On line photos

Jim Bollman
 

Are you looking for him? Was he also from WA?

Jim...

On Sep 8, 2019, at 10:35 PM, Plandersen <pkandersen@...> wrote:

Jim you do a great job.  I will try to make my 48 convertible worthy of such an honor.  Someone within the hierarchy of the club was interested in a radio of mine.  Last name started with an A if I remember right.  Kent

Kent Andersen, Mayor of the City of Royal City
PO Box 364
Royal City, WA  99357

Phone 509-346-1500
Fax 509-346-1540
Cell 509-760-5881
Email pkandersen@...





On Sep 8, 2019, at 2:50 PM, Jim Bollman <Jim@...> wrote:

Thanks for the reminder, I was out of town for a death in the family and completely forgot about it when I got home. I will try and get it up tonight.

Jim...

On Sep 8, 2019, at 5:20 PM, rpmansell@... wrote:

What happened with photo of month for Sept?(2891)




Re: On line photos

Plandersen
 

Jim you do a great job.  I will try to make my 48 convertible worthy of such an honor.  Someone within the hierarchy of the club was interested in a radio of mine.  Last name started with an A if I remember right.  Kent

Kent Andersen, Mayor of the City of Royal City
PO Box 364
Royal City, WA  99357

Phone 509-346-1500
Fax 509-346-1540
Cell 509-760-5881
Email pkandersen@...





On Sep 8, 2019, at 2:50 PM, Jim Bollman <Jim@...> wrote:

Thanks for the reminder, I was out of town for a death in the family and completely forgot about it when I got home. I will try and get it up tonight.

Jim...

On Sep 8, 2019, at 5:20 PM, rpmansell@... wrote:

What happened with photo of month for Sept?(2891)