Thank you for the warm welcome to the world of Crosley’s. I have much to learn. 
Looking forward to meeting some of you and hopefully making it to a meet or two in the future 

Hello all, I posted a while ago, but thought I would give this another go. I am looking for a set of either square back prewar doors or window frames. Mine were cut off at some point, and would like to restore the car back with window frames. Any help or thoughts would be appreciated. I have  given much thought o making them, but thought maybe I could get lucky.
Thanks again.
-James
crosley1980@...

Any chance you were at the national meet and had your eye on window frames there? I saw this post on a Crosley Facebook group earlier today, figured I'd share here in case it's you he's talking about.

-Bob 

On Fri, Jul 19, 2019, 6:33 PM James Dlapa <crosley1980@...> wrote:

Hello all, I posted a while ago, but thought I would give this another go. I am looking for a set of either square back prewar doors or window frames. Mine were cut off at some point, and would like to restore the car back with window frames. Any help or thoughts would be appreciated. I have  given much thought o making them, but thought maybe I could get lucky.
Thanks again.
-James
crosley1980@...

Attachments:

• Screenshot_20190719-195503.png

Hi matt

Give me a call I can get you fixed up.

866-449-0029. Dale

On Jun 25, 2019, at 5:47 PM, Hellbs <hollywoodhellberg@...> wrote:

Hello all,
After posting last time inquiring about a carburetor rebuild kit for our '39 coupe convertible, we have run into other problems.  I had a friend who does a lot of work on carbs for jet-skis take a look at it and had some problems.  He got is partially apart and cleaned it really well.  Had lots of soot and other buildup from gas decades ago.  He said he could only separate the carb about an inch and something was catching internally and was afraid if he tried to hard to separate it, something would break and be un-repairable.  We also have a very old book with about 6 pages all about Crosley maintenance.  We were attempting to adjust the set adjustment screws as the manual states but they are seized up as well.  In his past experiences, breaking those loose also causes future fuel leaks.  Long story short, the engine runs fine anything above idle, if we let the RPMs drop to idle speed, it dies.  Thought that a good cleaning would help clear this problem up and run better but it didn't.  He believe there is something else in the carb not working properly. 

So with his recommendation, I am here looking for another carb in good working order, or another carb to use for parts to fix this one if we break something when trying to fully separate the carb.  Attached is a picture of the carb currently on the car.

If anyone can help please respond to this post with contact information and myself or my dad will get in touch.  My grandpa (who is now gone) bought the car new and we really wanted to get it drive-able before he past but ran out of time.  So we would really like to get it up and going before we loose to much more time so my dad, his siblings, and rest of our family can enjoy this fun little car.

Thank you very much in advance!
 -Matt H.

Fourth and final set of pictures from the Nationals have been uploaded to the Club Web Page. 

http://crosleyautoclub.com/19Nationals/3-Saturday/index.html

If you find broken links or errors please send me a note so I can fix it.

Hope you enjoy the 2019 CAC Meet in photos

Jim...

Hi Jim,
      As always a Great Job! A big Thank you for all the work you do, and Thank you to all the people that makes the show happen!
Steve Olinger