Date   
Re: Trailer tie down locations

Dennis Wilkinson
 

Hi: I would love to know more about these frame mount tie downs! Is there a place online that I can see what they are? Sounds like something I could use. Thanks: Dennis

 

From: Crosley-Gang@groups.io <Crosley-Gang@groups.io> On Behalf Of crosleyshortsport
Sent: Wednesday, June 26, 2019 9:53 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] Trailer tie down locations

 

You are correct on the location. While Ted has the car, have him install the frame mount tie down parts for you. He has them for sale, and you will be glad you have them. 

 

On Wed, Jun 26, 2019, 10:45 PM Tom Gerhard <tom@...> wrote:

Big week here -- getting my (formerly my Dad's) '51 Super Sports back from Ted Dellacamera next week after many years in Dad's and then my garage.   Planning to celebrate with a new 7x14 enclosed trailer.   The dealer will install 4 D rings in the trailer for tie downs -- are there any guidance on where to put them?  I assume they would typically be near the front and rear and a bit inboard from the edges.

Re: Large Fan?

parkhunter@...
 

Four blade fans are typically used on parade vehicles that spend most of their time idling. When driving, more airflow comes from traveling at speed than the fan produces. As others have mentioned, it is probably more critical to install the cardboard air dams around the radiator, which ensure all that fresh cool 45-mph air goes through the radiator instead of around it. 

Park

Re: First post of my Crosley

Dennis Terdy
 

Andy,
Beautiful wagon and color. Love it!
Dennis

On Thu, Jun 27, 2019 at 12:44 AM Andy Farley <farleya1@...> wrote:
Cruise night at Mel's Diner, Auburn, California. Sorry, most of the other cars were gone by the time I got around to taking a pic.

Attachments:



--
Dennis Terdy

Re: Trailer tie down locations

Spock Arnold
 

Correct , just remember you have a 12 foot car and a 14 foot trailer.  You dont have a lot of extra room.  The tie downs need to be placed with that in mind. 

On Jun 26, 2019 10:45 PM, Tom Gerhard <tom@...> wrote:
Big week here -- getting my (formerly my Dad's) '51 Super Sports back from Ted Dellacamera next week after many years in Dad's and then my garage.   Planning to celebrate with a new 7x14 enclosed trailer.   The dealer will install 4 D rings in the trailer for tie downs -- are there any guidance on where to put them?  I assume they would typically be near the front and rear and a bit inboard from the edges.

Re: First post of my Crosley

James Hudson
 

Beautiful car! Thank you for posting the picture-Jim H.

First post of my Crosley

Andy Farley
 

Cruise night at Mel's Diner, Auburn, California. Sorry, most of the other cars were gone by the time I got around to taking a pic.

Re: Trailer tie down locations

crosleyshortsport
 

You are correct on the location. While Ted has the car, have him install the frame mount tie down parts for you. He has them for sale, and you will be glad you have them. 


On Wed, Jun 26, 2019, 10:45 PM Tom Gerhard <tom@...> wrote:
Big week here -- getting my (formerly my Dad's) '51 Super Sports back from Ted Dellacamera next week after many years in Dad's and then my garage.   Planning to celebrate with a new 7x14 enclosed trailer.   The dealer will install 4 D rings in the trailer for tie downs -- are there any guidance on where to put them?  I assume they would typically be near the front and rear and a bit inboard from the edges.

Trailer tie down locations

Tom Gerhard
 

Big week here -- getting my (formerly my Dad's) '51 Super Sports back from Ted Dellacamera next week after many years in Dad's and then my garage.   Planning to celebrate with a new 7x14 enclosed trailer.   The dealer will install 4 D rings in the trailer for tie downs -- are there any guidance on where to put them?  I assume they would typically be near the front and rear and a bit inboard from the edges.

Re: 12v conversion with alternator

Andy Farley
 

You make a good point. I looked it over and while it doesn't look like shiming the water pump would work because of how previous owners mounted it, it looks like I can shim the alternator mounting bracket to get good shaft alignment. Thank you for your observation. 

Re: 12v conversion with alternator

L.E. Hardee
 

Andy, from the picture it appears that the water pump shaft is not quite in line with the alternator bolt.  I couldn't tell exactly which direction due to the angle of the picture.  While the flex hose coupling allows it to work, you will put side loading on the water pump bearings and seal.  If you run the car a lot, it can cause leaks and eventual water pump failure.  A spacer of the right thickness between the water pump and the crankcase with appropriate longer bolts would solve right to left alignment.  I am not quite sure how to solve any up and down alignment.


On Wed, Jun 26, 2019 at 1:10 PM PATRICIA GRITTI <donald-gritti@...> wrote:
Jumping on this general invitation to participate in the Crosley blog. Unfortunately, have CRS disease. That is why I join into existing threads & haven't started my own thread in a long time. If anyone would help me restore my ID & password I'd be very greatful.
Don Gritti

On June 26, 2019 at 12:45 PM crosleyshortsport <crosleyshortsport@...> wrote:

Andy,  Glad you are enjoying working on the Crosley.  We are here to help in any way we can. Please post anything that you think will be beneficial to others.

On Wed, Jun 26, 2019, 12:02 PM Andy Farley < farleya1@...> wrote:
My solution to the water pump drive problem works. I'm just not sure that the bolt coming out of the alternator is really strong enough.  I'm just trying to make what I bought work. I've only had my Crosley for a few months in time I'll figure out a better method. Never had a Crosley before but I love these little cars. 


 

Re: Large Fan?

A50CROSLEYTRK@...
 

Air dams are important too. Some are under the bumper such as VC. On both sides of the radiator in CC and also in the hood on CD.  If  things are right mine has never over heated in WV mountains.

In a message dated 6/26/2019 2:23:09 PM Eastern Standard Time, Dale@... writes:

You should not need it as long as you have a clean radiator, clean engine, correct timing and a correct thermostat.  



On Jun 26, 2019, at 7:16 AM, jane altman <bchjanead@...> wrote:

larger fan? For blades?
I am wanting to regularly drive up mountains and on the road in general.  A comment made to me by my restoration guy:. "You might want to look into a larger fan to protect the aluminum cover from overheating".   Anyone have comments on this thought?
Thank you!
Jane

Re: Large Fan?

L.E. Hardee
 

I agree that more fan should not be necessary if everything else is good.  But if you do, try the four blade Farm-O-Road fan.  It fits the same as the regular fan.  Just be careful that you don't get a generator four blade fan.  It is designed to blow air out of the radiator instead of pulling it in from the grill.


On Wed, Jun 26, 2019 at 2:23 PM dale@... <Dale@...> wrote:
You should not need it as long as you have a clean radiator, clean engine, correct timing and a correct thermostat.  


On Jun 26, 2019, at 7:16 AM, jane altman <bchjanead@...> wrote:

larger fan? For blades?
I am wanting to regularly drive up mountains and on the road in general.  A comment made to me by my restoration guy:. "You might want to look into a larger fan to protect the aluminum cover from overheating".   Anyone have comments on this thought?
Thank you!
Jane

Re: Large Fan?

dale@servicemotors.net
 

You should not need it as long as you have a clean radiator, clean engine, correct timing and a correct thermostat.  


On Jun 26, 2019, at 7:16 AM, jane altman <bchjanead@...> wrote:

larger fan? For blades?
I am wanting to regularly drive up mountains and on the road in general.  A comment made to me by my restoration guy:. "You might want to look into a larger fan to protect the aluminum cover from overheating".   Anyone have comments on this thought?
Thank you!
Jane

Re: Large Fan?

seb fontana
 

What aluminum cover are we talking about?

Re: 12v conversion with alternator

PATRICIA GRITTI
 

Jumping on this general invitation to participate in the Crosley blog. Unfortunately, have CRS disease. That is why I join into existing threads & haven't started my own thread in a long time. If anyone would help me restore my ID & password I'd be very greatful.
Don Gritti

On June 26, 2019 at 12:45 PM crosleyshortsport <crosleyshortsport@...> wrote:

Andy,  Glad you are enjoying working on the Crosley.  We are here to help in any way we can. Please post anything that you think will be beneficial to others.

On Wed, Jun 26, 2019, 12:02 PM Andy Farley < farleya1@...> wrote:
My solution to the water pump drive problem works. I'm just not sure that the bolt coming out of the alternator is really strong enough.  I'm just trying to make what I bought work. I've only had my Crosley for a few months in time I'll figure out a better method. Never had a Crosley before but I love these little cars. 


 

Re: 12v conversion with alternator

crosleyshortsport
 

Andy,  Glad you are enjoying working on the Crosley.  We are here to help in any way we can. Please post anything that you think will be beneficial to others.


On Wed, Jun 26, 2019, 12:02 PM Andy Farley <farleya1@...> wrote:
My solution to the water pump drive problem works. I'm just not sure that the bolt coming out of the alternator is really strong enough.  I'm just trying to make what I bought work. I've only had my Crosley for a few months in time I'll figure out a better method. Never had a Crosley before but I love these little cars. 

Re: 12v conversion with alternator

Andy Farley
 

My solution to the water pump drive problem works. I'm just not sure that the bolt coming out of the alternator is really strong enough.  I'm just trying to make what I bought work. I've only had my Crosley for a few months in time I'll figure out a better method. Never had a Crosley before but I love these little cars. 

Large Fan?

jane altman
 

larger fan? For blades?
I am wanting to regularly drive up mountains and on the road in general.  A comment made to me by my restoration guy:. "You might want to look into a larger fan to protect the aluminum cover from overheating".   Anyone have comments on this thought?
Thank you!
Jane

Re: Looking for a carb

dale@servicemotors.net
 

Hi matt
Give me a call I can get you fixed up.
866-449-0029. Dale


On Jun 25, 2019, at 5:47 PM, Hellbs <hollywoodhellberg@...> wrote:

Hello all,
After posting last time inquiring about a carburetor rebuild kit for our '39 coupe convertible, we have run into other problems.  I had a friend who does a lot of work on carbs for jet-skis take a look at it and had some problems.  He got is partially apart and cleaned it really well.  Had lots of soot and other buildup from gas decades ago.  He said he could only separate the carb about an inch and something was catching internally and was afraid if he tried to hard to separate it, something would break and be un-repairable.  We also have a very old book with about 6 pages all about Crosley maintenance.  We were attempting to adjust the set adjustment screws as the manual states but they are seized up as well.  In his past experiences, breaking those loose also causes future fuel leaks.  Long story short, the engine runs fine anything above idle, if we let the RPMs drop to idle speed, it dies.  Thought that a good cleaning would help clear this problem up and run better but it didn't.  He believe there is something else in the carb not working properly. 

So with his recommendation, I am here looking for another carb in good working order, or another carb to use for parts to fix this one if we break something when trying to fully separate the carb.  Attached is a picture of the carb currently on the car.

If anyone can help please respond to this post with contact information and myself or my dad will get in touch.  My grandpa (who is now gone) bought the car new and we really wanted to get it drive-able before he past but ran out of time.  So we would really like to get it up and going before we loose to much more time so my dad, his siblings, and rest of our family can enjoy this fun little car.

Thank you very much in advance!
 -Matt H.

Re: Starter questions

L.E. Hardee
 

I have used a Crosley bendix on my Farmall before.


On Tue, Jun 25, 2019 at 11:53 PM Andy Farley <farleya1@...> wrote:
I was curious about the Farmall starter drive. I ordered one to see if it will work for my 48 station wagon. I needed to replace the Bendix anyway. I'll let you know in about a week.