Date   
Re: What is a complete Crosley CIBA engine worth?

L.E. Hardee
 

The high end price range would be determined by what crankshaft it has.  If it was a commercial engine with the good crank, it should have a "C" on the motor number.  The good cranks also have 6 bolt holes instead of just 3.  I also find the later model crankcases that have the oil filter behind the water pump to be more desirable and worth more to me.


On Tue, May 14, 2019 at 11:13 AM Todd Swangstu via Groups.Io <oldvw=yahoo.com@groups.io> wrote:
Actually looks to be a cobra ... Now that i saw pics.  

Any difference in value?

Thanks 

On May 14, 2019, at 6:01 AM, crosleyshortsport <crosleyshortsport@...> wrote:

$50  -   $150

On Tue, May 14, 2019, 1:50 AM Todd Swangstu via Groups.Io <oldvw=yahoo.com@groups.io> wrote:

Local guy has a CIBA engine on a stand that was apparently used around an old farmstead for power.  It is the complete engine with radiator on a stand.  Has not run in years but looks healthy and turns free.

I wouldn't mind to pick it up for spare if the price was right.  What would something like this sell for high and low prices if anyone could help.

Thank you

Todd

Re: Crosley speed equipment ...... where to find

dale@servicemotors.net
 

Service Motors has them.
866-449-0029


On May 14, 2019, at 8:10 AM, Jim Murphy <lftrn97@...> wrote:

Saw this old thread and am wondering if you ever got a response to your request for info. I sent an email recently and received an automated response that I needed to supply a note as to why I was inquiring which I did and have heard nothing. Is it still possible to communicate with Braje?

Re: What is a complete Crosley CIBA engine worth?

nadno1
 

Todd, I recently purchased one in decent shape, also not running, it was complete with transmission, starter/ generator and radiator and all accessories.
The farmer I got it from wanted  $100 for all of it, I thought it was a good buy.

Neal



Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: "Todd Swangstu via Groups.Io" <oldvw@...>
Date: 5/14/19 12:50 AM (GMT-06:00)
To: Crosley-Gang@groups.io
Subject: [Crosley-Gang] What is a complete Crosley CIBA engine worth?

Local guy has a CIBA engine on a stand that was apparently used around an old farmstead for power.  It is the complete engine with radiator on a stand.  Has not run in years but looks healthy and turns free.

I wouldn't mind to pick it up for spare if the price was right.  What would something like this sell for high and low prices if anyone could help.

Thank you

Todd

Re: What is a complete Crosley CIBA engine worth?

Ron Frost
 

Yep, good buy. I payed 175.00 10 years ago for the same thing.

 Ron Perma Frost
 
 


On Tuesday, May 14, 2019, 4:04:50 PM EDT, nadno1 via Groups.Io <nadno1@...> wrote:


Todd, I recently purchased one in decent shape, also not running, it was complete with transmission, starter/ generator and radiator and all accessories.
The farmer I got it from wanted  $100 for all of it, I thought it was a good buy.

Neal



Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: "Todd Swangstu via Groups.Io" <oldvw@...>
Date: 5/14/19 12:50 AM (GMT-06:00)
To: Crosley-Gang@groups.io
Subject: [Crosley-Gang] What is a complete Crosley CIBA engine worth?

Local guy has a CIBA engine on a stand that was apparently used around an old farmstead for power.  It is the complete engine with radiator on a stand.  Has not run in years but looks healthy and turns free.

I wouldn't mind to pick it up for spare if the price was right.  What would something like this sell for high and low prices if anyone could help.

Thank you

Todd

Re: 12” MQQN Trimrings: the results are in!!

Tim Hamblen
 

Why not forego the outer clips to hold them and do like the original ones, held to the wheel by the hubcap ? Much simpler.

Sad News - Member Joe Miller Has Passed

Jim Bollman
 

I got this news from Jeff Gladden last night, here is all I know.

Hate to pass on this sad news, however, we lost our friend Joe Miller who passed away today.  He was great and active Member of the Crosley Club.  He served as Director of Regions for many years and led the Keystone Region as President for many years too.  In recent years, he has been our Keystone Region Editor.  Joe was also the organizer of our Road Rally at Wauseon for all these years too.  Needless to say Joe was a big part of the Club and Region; he will be missed by so many.
 
The arrangements I know are as follows: 
 
Family/Visitation Thursday May 16th 2-4 and 7-9 at Mantins Funeral Home in Ford City, PA, and the funeral will be on Friday May 17th at 11 a.m. at United Rockville Lutheran Church, Ford City, PA
 
Please keep his family in your thoughts and prayers at this difficult time.
 
Regards,
Jeff

Re: What is a complete Crosley CIBA engine worth?

Todd Swangstu
 

Thank you


On Tuesday, May 14, 2019, 4:04:50 PM EDT, nadno1 via Groups.Io <nadno1@...> wrote:


Todd, I recently purchased one in decent shape, also not running, it was complete with transmission, starter/ generator and radiator and all accessories.
The farmer I got it from wanted  $100 for all of it, I thought it was a good buy.

Neal



Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: "Todd Swangstu via Groups.Io" <oldvw@...>
Date: 5/14/19 12:50 AM (GMT-06:00)
To: Crosley-Gang@groups.io
Subject: [Crosley-Gang] What is a complete Crosley CIBA engine worth?

Local guy has a CIBA engine on a stand that was apparently used around an old farmstead for power.  It is the complete engine with radiator on a stand.  Has not run in years but looks healthy and turns free.

I wouldn't mind to pick it up for spare if the price was right.  What would something like this sell for high and low prices if anyone could help.

Thank you

Todd

Re: 12” MQQN Trimrings: the results are in!!

Dave Shipman
 

I don’t know how that works because i’ve never seen or owned an original set of Crosley trimrings.
Do you have pictures? Thanks

Re: 12” MQQN Trimrings: the results are in!!

Gary Cochrane
 

It doesn’t look like the ring is wide enough to get under the cap. The original was wider. I have original on my SS. 




On Tuesday, May 14, 2019, 10:56 PM, Dave Shipman <officershipman@...> wrote:

I don’t know how that works because i’ve never seen or owned an original set of Crosley trimrings.
Do you have pictures? Thanks



Re: 12” MQQN Trimrings: the results are in!!

L.E. Hardee
 

The original "trim ring" was not so much a trim ring as we commonly know them but more of a hub cap extender to make the regular Crosley baby moon style cap look like a full wheel cover. I think they called them beauty rings.  It did not go way down into the rim but just dipped a bit before rising up to go under the hubcap. I am attaching a picture I found on the internet of something similar but not Crosley.


On Wed, May 15, 2019 at 10:52 AM Gary Cochrane via Groups.Io <g2cochrane=yahoo.com@groups.io> wrote:
It doesn’t look like the ring is wide enough to get under the cap. The original was wider. I have original on my SS. 




On Tuesday, May 14, 2019, 10:56 PM, Dave Shipman <officershipman@...> wrote:

I don’t know how that works because i’ve never seen or owned an original set of Crosley trimrings.
Do you have pictures? Thanks



Re: 12” MQQN Trimrings: the results are in!!

Steve Perry
 

So, it was actually held on by the hubcap and not by some spring steel teeth?
SP


On May 15, 2019, at 2:03 PM, L.E. Hardee <hftsales@...> wrote:

The original "trim ring" was not so much a trim ring as we commonly know them but more of a hub cap extender to make the regular Crosley baby moon style cap look like a full wheel cover. I think they called them beauty rings.  It did not go way down into the rim but just dipped a bit before rising up to go under the hubcap. I am attaching a picture I found on the internet of something similar but not Crosley.

On Wed, May 15, 2019 at 10:52 AM Gary Cochrane via Groups.Io <g2cochrane=yahoo.com@groups.io> wrote:
It doesn’t look like the ring is wide enough to get under the cap. The original was wider. I have original on my SS. 




On Tuesday, May 14, 2019, 10:56 PM, Dave Shipman <officershipman@...> wrote:

I don’t know how that works because i’ve never seen or owned an original set of Crosley trimrings.
Do you have pictures? Thanks



<beauty ring.jpg>

Re: 12” MQQN Trimrings: the results are in!!

Kenn Cahill
 

Correct

Re: 12” MQQN Trimrings: the results are in!!

Gary Cochrane
 

The ones I have do have an outer clip but need the cap to hold them in place. 




On Wednesday, May 15, 2019, 3:20 PM, Kenn Cahill <drkenncahill@...> wrote:

Correct



Crosley 18 wheeler

thing73@...
 

Hello, I am selling the "pinto" 18 wheeler. www.crosleygarage.com. Before I post it does anyone here have interest?
Frank

Re: 12” MQQN Trimrings: the results are in!!

Tim Hamblen
 

These should give you the idea

Re: 12” MQQN Trimrings: the results are in!!

Steve Perry
 

Yep.. explains it. So the Moon Trim rings won’t be “correct” but still be a good looking alternative..
Thanks for the pics
Steve


On May 16, 2019, at 5:03 PM, Tim Hamblen via Groups.Io <flinttim@...> wrote:

<30168145_10210988102929629_4967324971821556810_o.jpg>These should give you the idea

Re: Sad News - Member Joe Miller Has Passed

Steve
 

Jim,

Thank you for sharing this with the club.  Joe was gentleman in the club and a friend to many.  I went online and read his obituary.  I shared it with my wife who agreed it could well serve as a template for my own obituary.  One part would require no change, “He loved restoring his Crosleys.  He couldn't park his car in the garage with all of his Crosleys in there.”

 

We missed Joe at Wauseon last year.  Let’s be sure we remember him at Wauseon this year.

 

-Steve M.

 

From: Crosley-Gang@groups.io [mailto:Crosley-Gang@groups.io] On Behalf Of Jim Bollman
Sent: Tuesday, May 14, 2019 6:18 PM
To: Crosley-Gang@groups.io
Subject: [Crosley-Gang] Sad News - Member Joe Miller Has Passed

 

I got this news from Jeff Gladden last night, here is all I know.

Hate to pass on this sad news, however, we lost our friend Joe Miller who passed away today.  He was great and active Member of the Crosley Club.  He served as Director of Regions for many years and led the Keystone Region as President for many years too.  In recent years, he has been our Keystone Region Editor.  Joe was also the organizer of our Road Rally at Wauseon for all these years too.  Needless to say Joe was a big part of the Club and Region; he will be missed by so many.

 

The arrangements I know are as follows: 

 

Family/Visitation Thursday May 16th 2-4 and 7-9 at Mantins Funeral Home in Ford City, PA, and the funeral will be on Friday May 17th at 11 a.m. at United Rockville Lutheran Church, Ford City, PA

 

Please keep his family in your thoughts and prayers at this difficult time.

 

Regards,

Jeff

For Sale: 1949 Hot Shot - FL - $12,000 or Best Offer

Jim Bollman
 

1949 Crosley Hot Shot that runs great!  $12,000 OBO. Perfect little beach cruiser located in Jensen Beach, Florida!  Covered in garage and well maintained.  Due to father's health decline, it's not practical we keep.  Only 21,773 miles.  Engine and interior in great shape, and body is straight!  Car is complete except for radio and speaker.  Can show it anytime. Call/text anytime.  Julia's cell 619.980.8212

Re: Crosley 18 wheeler

Ron D.
 

Frank,
  What kind of price are you looking for?

Re: Crosley 18 wheeler

crosleyshortsport
 

Frank,   I suggest posting with pictures and price.  There is always i terest in Crosley and you have something very unique.


On Fri, May 17, 2019, 7:27 AM Ron D. <rdole417@...> wrote:
Frank,
  What kind of price are you looking for?