What tool do you use to remove the upper bolt on the tower shaft? I have a couple of sockets with the studs but nothing as tiny as the grooves in the shaft housing. Thank you.

On Mar 21, 2019, at 9:03 AM, Butch via Groups.Io <butch46988@...> wrote:

The upper tower shaft bolt should just have a 7/16" head (maybe 1/2", I'm not close to one at present), no special tool or socket required.

Butch

On 3/21/2019 11:38 AM, Jim Murphy wrote:

What tool do you use to remove the upper bolt on the tower shaft? I have a couple of sockets with the studs but nothing as tiny as the grooves in the shaft housing. Thank you.

Virus-free. www.avast.com

On Mar 20, 2019, at 9:36 AM, Barry Smedley <BSmedley@...> wrote:

The red ones are for the chrome nose Motorola the other one is for the philco I think.

 

Barry Smedley

 

From: Crosley-Gang@groups.io [mailto:Crosley-Gang@groups.io] On Behalf Of Plandersen
Sent: Wednesday, March 20, 2019 12:27 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] 3D Printing Radio Knobs????

 

I actually have an extra radio but not the knobs.  Mine has the red plastic knobs.  Kent

On Mar 20, 2019, at 8:45 AM, Mike S <miso7@...> wrote:

 

Were there more designs than these 2?  Which was more common?  Is the shaft the knobs go onto "D" shaped or do they have the slot for a metal strip in the back of the knob?
Mike S <Knob one.JPG><Knob philco.JPG>

 

This message contains confidential information intended solely for the use of the addressee(s) named above. Any review, disclosure, distribution, copying or use of the information by others is strictly prohibited. If you have received this message in error, please advise the sender by immediate reply and delete the original message. (English) Ce message contient des informations confidentielles destinées uniquement à l'usage du(des) destinataire(s) nommé(s) ci-dessus. Toute consultation, distribution, copie et utilisation du contenu de ce message est strictement prohibée. Si vous avez reçu ce message par erreur, SVP avisez l'expéditeur par réponse immédiate et effacez le message original. (French)

I actually have an extra radio but not the knobs.  Mine has the red plastic knobs.  Kent

On Mar 20, 2019, at 11:45 AM, Mike S <miso7@...> wrote:

[Edited Message Follows]

Were there more designs than these 2?  Which was more common?  Is the shaft the knobs go onto "D" shaped or do they have the slot for a metal strip in the back of the knob?  Were the original knobs die cast or plastic?
Mike S <Knob one.JPG><Knob philco.JPG>

On Mar 20, 2019, at 8:45 AM, Mike S <miso7@...> wrote:

Were there more designs than these 2?  Which was more common?  Is the shaft the knobs go onto "D" shaped or do they have the slot for a metal strip in the back of the knob?
Mike S <Knob one.JPG><Knob philco.JPG>

On Mar 20, 2019, at 8:23 AM, Jim Bollman <Jim@...> wrote:

Please start a new Topic when you start talking about something new. Hard to find things when they are labeled wrong. I moved this to a new thread with a better title.

Moderator
Jim...

Hella Electronics Corporation, 43811 Plymouth Oaks Blvd., 48170, Plymouth Michigan 
-----------------------------------------------------------------------------------------
This document is to be treated confidentially. Its contents are not to be passed on, duplicated, exploited or disclosed without our express permission. All rights reserved, especially the right to apply for protective rights.