Date   

1951 Super Sport Hot Shot Parts Needed

"georgelwprice" <georgelwprice@...>
 

I need a hood ornament (bird) and side emblems for a 1951 Super
Sports Hot Shot. Thanks.


Posting photos on ebay

"dccrosley" <Crosleydc@...>
 

I had the same problem putting photos on ebay.It turns out the same
things apply there as well: Quality and compression.I did that and
then they loaded fine on ebay.Look at the help section on ebay,and
follow their instructions.Good luck!

Dave Coudriet


Re: Photos on Yahoo! Groups / Ebay

Jim Bollman <Jim@...>
 

If you were not going to wait for an answer why did you ask if it was OK.

Jim...


Re: Photos on Yahoo! Groups / Ebay

Jim Bollman <Jim@...>
 

Two problems. You loaded 15 photos of your pickup 100-230 kbytes each that uses almost 10 percent of our total space allocation for one vehicle. For the size images you uploaded they can be compressed to around 25-30 Kbytes each and still view fine.

There are other photo sites that you can use for eBay auctions. My opinion is that our site should not be used for eBay auction pictures. I seem to remember Yahoo not allowing it but I couldn't find the rule. Currently I believe I have photo viewing open to anyone, this can change if necessary.

Anyone else have an opinion on using club space for eBay auction photos?

In the mean time please compress your photos more and reduce the total number of shots of the same vehicle to maybe 6 or so please.

Jim...

I am having difficulty uploading photos to Ebay. I have an option to
choose another URL to link the photos.

My question: Is the "Photo" link on the Crosley_Gang group for just
members, or can anyone view them? If you don't need to be a member, I
would like to link my truck auction to a folder with my photos in it.
Is this proper?

Brian


Re: 48 Truck again

"nerner333" <briandavonne@...>
 

--- In Crosley_Gang@y..., "nerner333" <briandavonne@h...> wrote:
I just checked my link on the last posting and it didn't work. If
interested please use the link below.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?
ViewItem&item=1823769815

Thanks,
Brian
For the link to work the space needs to be removed between the ? and
View

Sorry for the confusion.
Brian


48 Truck again

"nerner333" <briandavonne@...>
 

I just checked my link on the last posting and it didn't work. If
interested please use the link below.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?
ViewItem&item=1823769815

Thanks,
Brian


1948 Truck for Sale

"nerner333" <briandavonne@...>
 

My '48 is now listed on Ebay at the address below.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?
ViewItem&item=1823769815

Additional photos listed here on the Crosley_Gang "Photos" link.

Thanks,
Brian Wagner


Photos on Yahoo! Groups / Ebay

"nerner333" <briandavonne@...>
 

I am having difficulty uploading photos to Ebay. I have an option to
choose another URL to link the photos.

My question: Is the "Photo" link on the Crosley_Gang group for just
members, or can anyone view them? If you don't need to be a member, I
would like to link my truck auction to a folder with my photos in it.
Is this proper?

Brian


Re: Digest Number 24

"Barb and Clarence Kapraun" <backap1@...>
 

If these V shaped boxes are about the size of a shoe box lid then they are
the original defroster outlets for the early Crosley. These connected
directly to the underside of the dash openings. The other end then connected
to the hoses from the heater. Later models used a metal outlet.
++++++++++++++++++++
Type at you later
Barb & Kap

Message: 12
Date: Tue, 16 Apr 2002 20:56:38 -0700 (PDT)
From: Fitzsimmons Judi <no_haggle@...>
Subject: Re: Re: headliners


--- Jim Bollman <Jim@...> wrote:
Sounds like a fair price. Are you happy with the
quality and how it
matches the original? I have no idea what the "two
V shaped boxes
with sides" are used for. How large are these V
shaped boxes?

Jim...
you have heard that when something sounds to good to
be true, it probably isn't. such is the case on the
headliner kit. I rechecked my notes and saw that I was
in error the actual cost was $225 not $125. Sorry.
The quality by what I know is very good.I have a
problem in that the front half of the headliner had
the side panels sewn on in reverse but, they will
correct that for me at their expense. They are good
people to deal with.


Re: Vapor lock in 47Cc

"cosmicray48236" <sgreiner@...>
 

Thanks Larry. i will take a look at the coil although it is also new.
But you raise another question. The terminals on the new coil are not
marked. I put it in with the same orientation as the old one when I
replaced it. Thanks Skip


Re: "Kreem" for gas tank

"mcriverbug" <mcriverbug@...>
 

---Thanks Jim, There is even a Toll Free number - John
In Crosley_Gang@y..., Jim Bollman <Jim@B...> wrote:

John, After doing the following search it looks like a product you
can get at a motorcycles shop.
http://www.google.com/search?hl=en&q=Kreem+gas+tanks

Jim...

Where can I find a supplier for this product? I have used it before
on Whizzer gas tanks, with great results. I could not find it in
Hemmings. Thanks - John


Re: "Kreem" for gas tank

Jim Bollman <Jim@...>
 

John, After doing the following search it looks like a product you can get at a motorcycles shop. http://www.google.com/search?hl=en&q=Kreem+gas+tanks

Jim...

Where can I find a supplier for this product? I have used it before
on Whizzer gas tanks, with great results. I could not find it in
Hemmings. Thanks - John


"Kreem" for gas tank

"mcriverbug" <mcriverbug@...>
 

Where can I find a supplier for this product? I have used it before
on Whizzer gas tanks, with great results. I could not find it in
Hemmings. Thanks - John


Re: Vapor lock in a 47CC

"bltlar" <bltlar@...>
 

Check the coil. Had same type problem, someone had reversed leads on
coil. Changed coil, & fixed. Though it was fuel too. Think internal
heat caused breakdown.
Larry --
- In Crosley_Gang@y..., "cosmicray48236" <sgreiner@w...> wrote:
I am finally getting a chance to put some miles on the 47. I have
encountered the following problem. If the car is warmed up and run
for
a while and then parked for a while and then driven again the
following happens. The car starts fine but has a total lack of
power
and will not accelerate. The engine seems to be starving for fuel.
If
you stop with the engine running the problem clears up after a few
minutes and it then runs OK. The tank and fuel lines are new. The
carb, filter and pump have been overhauled. When I got the car the
fuel line was run over the top of the engine and attached with a
bracket to front valve cover stud for support. I installed the new
line in the same position. If the engine is not stopped the problem
does not seem to occur. I believe that this is vapor lock but I
have
never encountered it before. I would appreciate any suggestions as
to
what this is and how to solve it. Thanks Skip


Vapor lock in a 47CC

"cosmicray48236" <sgreiner@...>
 

I am finally getting a chance to put some miles on the 47. I have
encountered the following problem. If the car is warmed up and run for
a while and then parked for a while and then driven again the
following happens. The car starts fine but has a total lack of power
and will not accelerate. The engine seems to be starving for fuel. If
you stop with the engine running the problem clears up after a few
minutes and it then runs OK. The tank and fuel lines are new. The
carb, filter and pump have been overhauled. When I got the car the
fuel line was run over the top of the engine and attached with a
bracket to front valve cover stud for support. I installed the new
line in the same position. If the engine is not stopped the problem
does not seem to occur. I believe that this is vapor lock but I have
never encountered it before. I would appreciate any suggestions as to
what this is and how to solve it. Thanks Skip


LiL PHoot

"mcriverbug" <mcriverbug@...>
 

I think it belongs to DR. Phartz aka - Jak That is so cool,it
reminds me of a large roller skate. - John


Re: lil phoot

Papajaks@...
 

hi jon, thanks phor noting lil phoot. i set the roundside body on the 83"
wb
CJ-5 chassis and running gear. had to cut away the phire wall to accommodate
the 6 cyl [3 cyls under the hood, 3 and carter under the dash], cut a little
phrom
wheel wells, cut a battery tray on passenger well [master cylinder occupies
orig]
dropped in a nash metropolitan radiator and built a box around the portion of
the engine in the cab. now i just need some insulation between the
accelerator and that exhaust manifold phor the summer months.

jak phillips


lil phoot

"jonathan davis" <fiat103d@...>
 

HI
I SAW THE LIL PHOOT IN THE GROUP PHOTOS.WHO OWNS IT.HOW DID YOU DO IT.
THANKS
JON


_________________________________________________________________
Chat with friends online, try MSN Messenger: http://messenger.msn.com


Re: '48 parking-lamp socket.

"crsoleykid" <Phs962@...>
 

--- In Crosley_Gang@y..., x779@w... wrote:
I have a set of round frosted-glass parking lights for my '48 CC
SW, but
am missing one of the sockets that fits inside the lens. Can anyone
help? Thanks.

Regards....
Lou
Lou,
If you mean the socket that the bulb fits in it is
" Echlin # LS 6114 " . If it is the part that the lens fits in
you might try the garage section on the home page .I remember
somthing about that in there.

Paul
Phs962@...


'48 parking-lamp socket.

x779@...
 

I have a set of round frosted-glass parking lights for my '48 CC SW, but
am missing one of the sockets that fits inside the lens. Can anyone
help? Thanks.

Regards....
Lou
~~~~~~~~~~~~~ **-=&#92;/=-** ~~~~~~~~~~~~~

The opposite of bravery is not cowardice, but conformity.
– Robert Anthony