Re: Cardboard deflectors around radiator

Barry Smedley
 

Made mine out of aluminum painted them black, hold up very well.

 

       Barry Smedley

 

From: Crosley-Gang@groups.io [mailto:Crosley-Gang@groups.io] On Behalf Of Tim Hamblen via Groups.Io
Sent: Saturday, October 20, 2018 8:25 PM
To: Crosley-Gang@groups.io
Subject: Re: [Crosley-Gang] Cardboard deflectors around radiator

 

They are very simple. You have a radiator support running across the front. The cardboards fill in the two gaps on either side of the radiator from the upper support down to the lower support. The one on the horn side has a hole cut in it for the horn bell to stick through. Look close and you will see the holes in the upper and lower support  for the clips that hold the boards. The lower 1" inch or so of the cardboards is bent at a 90 deg and the clips go down into the support while the upper ones go in horizontal. Give it a look and you will see . The one everyone misses is the one in the hood. Look close at the hood and  how the air flows and you will see how it is shaped.I go to the local supply that sells 1/8" foam core for sign boards. Sign shops put vinyl graphics on it. Won't rot or decay.

This message contains confidential information intended solely for the use of the addressee(s) named above. Any review, disclosure, distribution, copying or use of the information by others is strictly prohibited. If you have received this message in error, please advise the sender by immediate reply and delete the original message. (English) Ce message contient des informations confidentielles destinées uniquement à l'usage du(des) destinataire(s) nommé(s) ci-dessus. Toute consultation, distribution, copie et utilisation du contenu de ce message est strictement prohibée. Si vous avez reçu ce message par erreur, SVP avisez l'expéditeur par réponse immédiate et effacez le message original. (French)

Join Crosley-Gang@groups.io to automatically receive all group messages.