Re: What is best spot to tie down Crosley wagon for towing?
I would not use a tie point in the center of the axle, it could bend the axle if you tie down to hard or hit some bumps, especially the pre 1950 axle that was lighter weight. I always do two in the front and two in the back either straight or crossed your choice. Tie in the front outboard of the leaf springs making sure your are looping around just the axle and not part of the steering linkage. On the back I again go outboard of the springs, be sure not to get any of the brake lines or cables in the loop around the axle, again either straight or crossed. I have used chains and straps, both are fine but don't use the really light weight cheap straps they sell at Harbor Freight or other box stores, be sure they are rated for the load you have.toggle quoted messageShow quoted text
Being a belt and suspenders kind of guy I always add a single chain to the front, not pulled tight just as a last ditch in case the worse happens, the car will not roll into traffic behind me. I usually just loop that around a front spring shackle since it will only pull tight if something completely unexpected happens.
A lot depends on how far your trailering too, if only a short distance you can be a little less cautious than if you're going hundreds of miles.